3D Printing Surgical Implants at the clinic: A Experimental Study on Anterior Cruciate Ligament Reconstruction

Desktop three-dimensional (3D) printers (D3DPs) have become a popular tool for fabricating personalized consumer products, favored for low cost, easy operation, and other advantageous qualities. This study focused on the potential for using D3DPs to successfully, rapidly, and economically print customized implants at medical clinics. An experiment was conducted on a D3DP-printed anterior cruciate ligament surgical implant using a rabbit model. A well-defined, orthogonal, porous PLA screw-like scaffold was printed, then coated with hydroxyapatite (HA) to improve its osteoconductivity. As an internal fixation as well as an ideal cell delivery system, the osteogenic scaffold loaded with mesenchymal stem cells (MSCs) were evaluated through both in vitro and in vivo tests to observe bone-ligament healing via cell therapy. The MSCs suspended in Pluronic F-127 hydrogel on PLA/HA screw-like scaffold showed the highest cell proliferation and osteogenesis in vitro. In vivo assessment of rabbit anterior cruciate ligament models for 4 and 12 weeks showed that the PLA/HA screw-like scaffold loaded with MSCs suspended in Pluronic F-127 hydrogel exhibited significant bone ingrowth and bone-graft interface formation within the bone tunnel. Overall, the results of this study demonstrate that fabricating surgical implants at the clinic (fab@clinic) with D3DPs can be feasible, effective, and economical.

[1]  J. Jansen,et al.  A new method to produce macropores in calcium phosphate cements. , 2002, Biomaterials.

[2]  Ling Qin,et al.  Cartilage regeneration using mesenchymal stem cells and a PLGA-gelatin/chondroitin/hyaluronate hybrid scaffold. , 2006, Biomaterials.

[3]  N. Jones.  Science in three dimensions: The print revolution , 2012, Nature.

[4]  Catherine G. Ambrose,et al.  Bioabsorbable Implants: Review of Clinical Experience in Orthopedic Surgery , 2004, Annals of Biomedical Engineering.

[5]  Brendon M. Baker,et al.  Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues , 2012 .

[6]  Jason A Inzana,et al.  3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration. , 2014, Biomaterials.

[7]  D. Kaplan,et al.  Porosity of 3D biomaterial scaffolds and osteogenesis. , 2005, Biomaterials.

[8]  Anthony Atala,et al.  3D bioprinting of tissues and organs , 2014, Nature Biotechnology.

[9]  Staffan Strömblad,et al.  RETRACTED: Tracheobronchial transplantation with a stem-cell-seeded bioartificial nanocomposite: a proof-of-concept study , 2011, The Lancet.

[10]  J. Goh,et al.  Selection of cell source for ligament tissue engineering. , 2005, Cell transplantation.

[11]  Hod Lipson,et al.  Fab@Home: the personal desktop fabricator kit , 2007 .

[12]  Kah Fai Leong,et al.  Cryogenic prototyping of chitosan scaffolds with controlled micro and macro architecture and their effect on in vivo neo-vascularization and cellular infiltration. , 2010, Journal of biomedical materials research. Part A.

[13]  W. H. Warden,et al.  Ten-year magnetic resonance imaging follow-up of bioabsorbable poly-L-lactic acid interference screws after anterior cruciate ligament reconstruction. , 2008, Arthroscopy : the journal of arthroscopic & related surgery : official publication of the Arthroscopy Association of North America and the International Arthroscopy Association.

[14]  O. Böstman,et al.  Bioabsorbable fixation in orthopaedic surgery and traumatology. , 2000, Biomaterials.

[15]  Science and society. Experts warn against bans on 3D printing. , 2013, Science.

[16]  Carl Schubert,et al.  Innovations in 3D printing: a 3D overview from optics to organs , 2013, British Journal of Ophthalmology.

[17]  Benjamin M Wu,et al.  Recent advances in 3D printing of biomaterials , 2015, Journal of Biological Engineering.

[18]  Joseph W Freeman,et al.  Anterior cruciate ligament regeneration using braided biodegradable scaffolds: in vitro optimization studies. , 2005, Biomaterials.

[19]  Joan Horvath.  Typical Printer Settings , 2014 .

[20]  The Print Revolution , 2016 .

[21]  Yong He,et al.  Fabrication of low cost soft tissue prostheses with the desktop 3D printer , 2014, Scientific Reports.

[22]  Rashid Bashir,et al.  “Living” Microvascular Stamp for Patterning of Functional Neovessels; Orchestrated Control of Matrix Property and Geometry , 2012, Advanced materials.

[23]  Brian Derby,et al.  Printing and Prototyping of Tissues and Scaffolds , 2012, Science.

[24]  Pan Weimin,et al.  Tendon-to-bone healing using an injectable calcium phosphate cement combined with bone xenograft/BMP composite. , 2013, Biomaterials.

[25]  Marc E. Nelson,et al.  Bioresorbable airway splint created with a three-dimensional printer. , 2013, The New England journal of medicine.

[26]  R. Warren,et al.  Tendon-healing in a bone tunnel. A biomechanical and histological study in the dog. , 1993, The Journal of bone and joint surgery. American volume.

[27]  Gabriel Villar,et al.  A Tissue-Like Printed Material , 2013, Science.

[28]  Takashi Nakamura,et al.  The complete process of bioresorption and bone replacement using devices made of forged composites of raw hydroxyapatite particles/poly l-lactide (F-u-HA/PLLA). , 2005, Biomaterials.

[29]  Philip J. Kitson,et al.  Integrated 3D-printed reactionware for chemical synthesis and analysis. , 2012, Nature chemistry.

[30]  W. Willems,et al.  Tissue engineering of ligaments: a comparison of bone marrow stromal cells, anterior cruciate ligament, and skin fibroblasts as cell source. , 2004, Tissue engineering.

[31]  P. A. Revell,et al.  Microporosity enhances bioactivity of synthetic bone graft substitutes , 2005, Journal of materials science. Materials in medicine.

[32]  R. Arciero,et al.  Material properties and composition of soft-tissue fixation. , 2010, Arthroscopy : the journal of arthroscopic & related surgery : official publication of the Arthroscopy Association of North America and the International Arthroscopy Association.

[33]  Joshua M. Pearce,et al.  Open-Source 3D-Printable Optics Equipment , 2013, PloS one.

[34]  C. M. Agrawal,et al.  Technique to control pH in vicinity of biodegrading PLA-PGA implants. , 1997, Journal of biomedical materials research.

[35]  Michael C. McAlpine,et al.  3D Printed Bionic Ears , 2013, Nano letters.

[36]  W. Dockery,et al.  Long-term absorption of poly-L-lactic Acid interference screws. , 2006, Arthroscopy : the journal of arthroscopic & related surgery : official publication of the Arthroscopy Association of North America and the International Arthroscopy Association.

[37]  A. Feydy,et al.  Anterior cruciate ligament reconstruction with bioabsorbable polyglycolic acid interference screws: MR imaging follow-up. , 2002, Radiology.

[38]  I. Zein,et al.  Fused deposition modeling of novel scaffold architectures for tissue engineering applications. , 2002, Biomaterials.

[39]  Hongbin Fan,et al.  Anterior cruciate ligament regeneration using mesenchymal stem cells and silk scaffold in large animal model. , 2009, Biomaterials.

[40]  J. Goh,et al.  In vivo study of anterior cruciate ligament regeneration using mesenchymal stem cells and silk scaffold. , 2008, Biomaterials.