Bending and compressive stresses acting on the lumbar spine during lifting activities.

Cadaveric studies have shown that intervertebral discs and ligaments are most vulnerable to injury when loaded simultaneously in bending and compression. The purpose of the present experiment was to measure bending and compressive stresses acting on the lumbar spine during forward bending and lifting activities, and to identify those aspects of lifting which increase the risk of injury. Twenty-one men and eighteen women lifted objects from the ground while the following parameters were varied: the angle of the knees ('squat' lift or 'stoop' lift), the mass of the object, its bulk, its distance in front of the feet, its distance away from the sagittal plane, and the speed of movement. Spinal compression was assessed by measuring the peak extensor moment generated by the back muscles and fascia during the lift. Extensor moment was calculated from the EMG activity of the erector spinae muscles, using corrections for muscle length, contraction velocity and electro-mechanical delay. The bending moment ('bending torque') acting on the intervertebral discs and ligaments was quantified by comparing dynamic measurements of lumbar flexion, obtained with the '3-Space Isotrak', with the normalised bending properties of cadaveric lumbar spines. Results showed that stoop lifting reduced the peak extensor moment by about 10% compared to squat lifting, but increased the bending torque by about 75%. Extensor moment and bending torque both increased substantially with increasing mass, bulk and distance from the feet. Non-sagittal plane lifts increased the bending torque by about 30%. The fastest lifts increased peak extensor moment by 60% but did not increase bending torque. We conclude that complex spinal loading during lifting tasks depends as much on the speed of movement, and the size and position of the object lifted, as on its mass. Analyses of spinal loading which consider only compressive forces do not give a full indication of the risk of injury to the intervertebral discs and ligaments.

[1]  M. Adams,et al.  Influence of lumbar and hip mobility on the bending stresses acting on the lumbar spine. , 1993, Clinical biomechanics.

[2]  R. Norman,et al.  1986 Volvo Award in Biomechanics: Partitioning of the L4 - L5 Dynamic Moment into Disc, Ligamentous, and Muscular Components During Lifting , 1986, Spine.

[3]  J R Potvin,et al.  Trunk Muscle and Lumbar Ligament Contributions to Dynamic Lifts with Varying Degrees of Trunk Flexion , 1991, Spine.

[4]  T. Andriacchi,et al.  Influence of Dynamic Factors and External Loads on the Moment at the Lumbar Spine in Lifting , 1988, Spine.

[5]  T P Leskinen,et al.  Comparison of static and dynamic biomechanical models. , 1985, Ergonomics.

[6]  G Ray,et al.  Stiffness and strain energy criteria to evaluate the threshold of injury to an intervertebral joint. , 1989, Journal of biomechanics.

[7]  M. Adams,et al.  A technique for quantifying the bending moment acting on the lumbar spine in vivo. , 1991, Journal of biomechanics.

[8]  W. Hutton,et al.  Diurnal Variations in the Stresses on the Lumbar Spine , 1987, Spine.

[9]  C Frigo,et al.  Three-dimensional model for studying the dynamic loads on the spine during lifting. , 1990, Clinical biomechanics.

[10]  M J Pearcy,et al.  Instantaneous Axes of Rotation of the Lumbar Intervertebral Joints , 1988, Spine.

[11]  D B Chaffin,et al.  A biomechanical evaluation of five lifting techniques. , 1986, Applied ergonomics.

[12]  Michael A. Adams,et al.  Posture and the compressive strength of the lumbar spine , 1994 .

[13]  P. Dolan,et al.  The clinical biomechanics award paper 1993 Posture and the compressive strength of the lumbar spine. , 1994, Clinical biomechanics.

[14]  A Shirazi-Adl,et al.  A finite element study of a lumbar motion segment subjected to pure sagittal plane moments. , 1986, Journal of biomechanics.

[15]  O. Lippold,et al.  The relation between force, velocity and integrated electrical activity in human muscles , 1954, The Journal of physiology.

[16]  T. Andriacchi,et al.  Relationship between moments at the L5/S1 level, hip and knee joint when lifting. , 1990, Journal of biomechanics.

[17]  G. Andersson,et al.  Low‐Back Pain in 40− to 47‐Year-Old Men: Work History and Work Environment Factors , 1983, Spine.

[18]  J A Holmes,et al.  Erector Spinae Activation and Movement Dynamics About the Lumbar Spine in Lordotic and Kyphotic Squat-Lifting , 1992, Spine.

[19]  P. Brinckmann,et al.  Fatigue fracture of human lumbar vertebrae. , 1988, Clinical biomechanics.

[20]  A Magora,et al.  Investigation of the relation between low back pain and occupation. , 1970, IMS, Industrial medicine and surgery.

[21]  P Brinckmann,et al.  Injury of the Annulus Fibrosus and Disc Protrusions: An In Vitro Investigation on Human Lumbar Discs , 1986, Spine.

[22]  L. S. Matthews,et al.  A biomechanical model of the lumbosacral joint during lifting activities. , 1985, Journal of biomechanics.

[23]  P. Dolan,et al.  The relationship between EMG activity and extensor moment generation in the erector spinae muscles during bending and lifting activities. , 1993, Journal of biomechanics.

[24]  A. Schultz,et al.  Analysis of Loads on the Lumbar Spine , 1981, Spine.

[25]  R W Norman,et al.  Effects of an anatomically detailed erector spinae model on L4/L5 disc compression and shear. , 1987, Journal of biomechanics.

[26]  M. Adams,et al.  Gradual Disc Prolapse , 1985, Spine.

[27]  A Shirazi-Adl,et al.  Strain in Fibers of a Lumbar Disc: Analysis of the Role of Lifting in Producing Disc Prolapse , 1989, Spine.

[28]  P. Dolan,et al.  Passive tissues help the back muscles to generate extensor moments during lifting. , 1994, Journal of biomechanics.

[29]  M. Adams,et al.  The Resistance to Flexion of the Lumbar Intervertebral Joint , 1980, Spine.

[30]  Adams Ma,et al.  Prolapsed Intervertebral Disc: A Hyperflexion Injury , 1982 .

[31]  King H. Yang,et al.  Mechanism of Disc Rupture: A Preliminary Report , 1991, Spine.

[32]  Park KyungS.,et al.  A Biomechanical Evaluation of Two Methods of Manual Load Lifting , 1974 .

[33]  W. Hutton,et al.  The Lumbar Spine in Backward Bending , 1988, Spine.

[34]  M. Bovenzi,et al.  Self‐Reported Low Back Symptoms in Urban Bus Drivers Exposed to Whole‐Body Vibration , 1992, Spine.

[35]  Y. K. Liu,et al.  Fatigue Response of Lumbar Intervertebral Joints Under Axial Cyclic Loading , 1983, Spine.

[36]  A Magora,et al.  Investigation of the relation between low back pain and occupation. IV. Physical requirements: bending, rotation, reaching and sudden maximal effort. , 1973, Scandinavian journal of rehabilitation medicine.

[37]  S Gracovetsky,et al.  The Optimum Spine , 1986, Spine.

[38]  W C Hutton,et al.  Has the lumbar spine a margin of safety in forward bending? , 1986, Clinical biomechanics.

[39]  M. Pearcy,et al.  Three-Dimensional X-ray Analysis of Normal Movement in the Lumbar Spine , 1984, Spine.

[40]  R W Norman,et al.  Dynamically and statically determined low back moments during lifting. , 1985, Journal of biomechanics.

[41]  T. Keller,et al.  Mechanical behavior of the human lumbar spine. II. Fatigue strength during dynamic compressive loading , 1987, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[42]  J. Kelsey,et al.  An epidemiologic study of lifting and twisting on the job and risk for acute prolapsed lumbar intervertebral disc , 1984, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[43]  Royal,et al.  MOVEMENTS OF THE THORACIC AND LUMBAR SPINE WHEN LIFTING: A CHRONO-CYCLOPHOTOGRAPHIC STUDY. , 1965, Journal of anatomy.