Preparation of High-Performance Mg-Gd-Y-Mn-Sc Alloy by Heat Treatment and Extrusion

[1]  Xiang Chen,et al.  Optimization in strength-ductility of heterogeneous Mg-13Gd alloy via small extrusion ratio combined with pre-aging , 2022, Materials Science and Engineering: A.

[2]  Yuan-chun Huang,et al.  Effects of heat treatment before extrusion on dynamic recrystallization behavior, texture and mechanical properties of as-extruded Mg-Gd-Y-Zn-Zr alloy , 2022, Materials Science and Engineering: A.

[3]  N. Tsuji,et al.  Discontinuous yielding phenomena triggered by Zn addition in low-alloyed Mg-Al-Ca-Mn alloys , 2022, Scripta Materialia.

[4]  C. Xu,et al.  Role of homogenization on tensile properties and microstructures in a dilute Mg–Zn–Ca–Mn alloy sheet , 2021, Materials Science and Engineering: A.

[5]  Junjian Fu,et al.  Effects of grain refinement and precipitate strengthening on mechanical properties of double-extruded Mg-12Gd-2Er-0.4Zr alloy , 2021, Journal of Alloys and Compounds.

[6]  Zhimin Zhang,et al.  An alternating ageing-annealing process for enhancing strength and ductility of a Mg-Gd-Y-Zn-Zr alloy , 2021, Materials Science and Engineering: A.

[7]  Zhimin Zhang,et al.  Preparation of ultra-high strength Mg-Gd-Y-Zn-Zr alloy by pre-ageing treatment prior to extrusion , 2021, Journal of Alloys and Compounds.

[8]  Ke Liu,et al.  Microstructures and mechanical properties of as-extruded Mg–8Gd–2Y–1Zn–6Li alloy , 2021 .

[9]  Chao Xu,et al.  Effect of extrusion ratio and temperature on microstructures and tensile properties of extruded Mg-Gd-Y-Mn-Sc alloy , 2021 .

[10]  Kuai-she Wang,et al.  Achieving an ultra-high strength and moderate ductility in Mg–Gd–Y–Zn–Zr alloy via a decreased-temperature multi-directional forging , 2021 .

[11]  Joon-Phil Choi,et al.  Additive manufacturing of a shift block via laser powder bed fusion: the simultaneous utilisation of optimised topology and a lattice structure , 2020 .

[12]  J. C. Huang,et al.  Evolution of microstructures and mechanical properties of Mg-1.4Gd-1.2Y-0.4Zn-0.5Al sheets with different extrusion ratios , 2020 .

[13]  Hua-nan Liu,et al.  Achieving excellent ductility in high-strength Mg-10.6Gd-2 Ag alloy via equal channel angular pressing , 2020 .

[14]  Z. Cao,et al.  A high-strength low-rare-earth-alloyed magnesium alloy via traditional hot-extrusion , 2019, Journal of Alloys and Compounds.

[15]  T. Zhao,et al.  Effect of manganese on microstructure and properties of Mg-2Gd magnesium alloy , 2019, Materials Science and Engineering: A.

[16]  Bing Li,et al.  Effects of friction stir process and subsequent aging treatment on the microstructure evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy , 2019, Materials Characterization.

[17]  S. Kamado,et al.  Enhancing strength and creep resistance of Mg–Gd–Y–Zn–Zr alloy by substituting Mn for Zr , 2019, Journal of Magnesium and Alloys.

[18]  Yan Feng,et al.  Development of extruded Mg-6Er-3Y-1.5Zn-0.4Mn (wt.%) alloy with high strength at elevated temperature , 2019, Journal of Materials Science & Technology.

[19]  K. Deng,et al.  Effect of extrusion parameters on microstructure, texture and mechanical properties of Mg-1.38Zn-0.17Y-0.12Ca (at. %) alloy , 2019, Materials Characterization.

[20]  J. C. Huang,et al.  High strength Mg-1.4Gd-1.2Y-0.4Zn sheet and its strengthening mechanisms , 2019, Materials Science and Engineering: A.

[21]  T. Kwak,et al.  Mechanical properties and Hall-Petch relationship of the extruded Mg-Zn-Y alloys with different volume fractions of icosahedral phase , 2019, Journal of Alloys and Compounds.

[22]  M. Barnett,et al.  An Orowan precipitate strengthening equation for mechanical twinning in Mg , 2019, International Journal of Plasticity.

[23]  Yujuan Wu,et al.  The role of bimodal-grained structure in strengthening tensile strength and decreasing yield asymmetry of Mg-Gd-Zn-Zr alloys , 2017, Materials Science and Engineering: A.

[24]  W. Jie,et al.  Microstructure evolution, mechanical properties and diffusion behaviour of Mg-6Zn-2Gd-0.5Zr alloy during homogenization , 2018, Journal of Materials Science & Technology.

[25]  M. Jiang,et al.  Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion , 2018, Acta Materialia.

[26]  Song-Jeng Huang,et al.  Enhanced mechanical properties of Mg-Gd-Y-Zn-Mn alloy by tailoring the morphology of long period stacking ordered phase , 2018 .

[27]  Fang Wang,et al.  Fabrication of high-strength Mg-Y-Sm-Zn-Zr alloy by conventional hot extrusion and aging , 2018 .

[28]  Yuntian Zhu,et al.  Grain refining and mechanical properties of AZ31 alloy processed by accumulated extrusion bonding , 2018 .

[29]  A. Salandari-Rabori,et al.  Micro and macro texture evolution during multiaxial forging of a WE43 magnesium alloy , 2018 .

[30]  Meng Huang,et al.  Deformation Behavior of Ultra-Strong and Ductile Mg-Gd-Y-Zn-Zr Alloy with Bimodal Microstructure , 2018, Metallurgical and Materials Transactions A.

[31]  J. Meng,et al.  Microstructure evolution and mechanical properties of as-extruded Mg-Gd-Y-Zr alloy with Zn and Nd additions , 2018 .

[32]  Shu-nong Jiang,et al.  Microstructure and mechanical properties of extruded Mg-Gd-Y-Zn-Zr alloys filled with intragranular LPSO phases , 2018 .

[33]  C. Xu,et al.  Effects of pre-annealing on microstructure and mechanical properties of as-extruded Mg-Gd-Y-Zn-Zr alloy , 2017 .

[34]  N. Gao,et al.  Microstructure and mechanical properties of a nanostructured Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr supersaturated solid solution prepared by high pressure torsion , 2017 .

[35]  J. Meng,et al.  Microstructure evolution and mechanical properties of a high strength Mg-11.7Gd-4.9Y-0.3Zr (wt%) alloy prepared by pre-deformation annealing, hot extrusion and ageing , 2017 .

[36]  Ming Li,et al.  The effect of morphology of the long-period stacking ordered phase on mechanical properties of the Mg-7Gd-3Y-1Nd-1Zn-0.5Zr (wt.%) alloy , 2017 .

[37]  C. Xu,et al.  Ageing behavior of extruded Mg–8.2Gd–3.8Y–1.0Zn–0.4Zr (wt.%) alloy containing LPSO phase and γ′ precipitates , 2017, Scientific Reports.

[38]  Chao Xu,et al.  Effect of LPSO and SFs on microstructure evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy , 2017, Scientific Reports.

[39]  H. Yan,et al.  Unusual cold rolled texture in an Mg-2.0Zn-0.8Gd sheet , 2017 .

[40]  C. Xu,et al.  Ultrahigh strength as-extruded Mg–10.3Zn–6.4Y–0.4Zr–0.5Ca alloy containing W phase , 2016 .

[41]  Junlong Zhang,et al.  Microstructure, texture and mechanical properties of Mg-3.0Zn-0.2Ca alloys fabricated by extrusion at various temperatures , 2015 .

[42]  F. Jiang,et al.  Microstructure, mechanical and damping properties of Mg-Er-Gd-Zn alloy reinforced with stacking faults , 2015 .

[43]  Fanzhi Meng,et al.  Fabrication of a high strength Mg–11Gd–4.5Y–1Nd–1.5Zn–0.5Zr (wt%) alloy by thermomechanical treatments , 2015 .

[44]  Qiang Yang,et al.  Fabrication of magnesium alloy with high strength and heat-resistance by hot extrusion and ageing , 2013 .

[45]  Yan Du,et al.  Effect of ageing treatment on the microstructure, texture and mechanical properties of extruded Mg–8.2Gd–3.8Y–1Zn–0.4Zr (wt%) alloy , 2013 .

[46]  N. Zhou,et al.  Enhanced strength and ductility of Mg–Gd–Y–Zr alloys by secondary extrusion , 2013 .

[47]  Chao Xu,et al.  Effect of cooling rate on the microstructure evolution and mechanical properties of homogenized Mg–Gd–Y–Zn–Zr alloy , 2013 .

[48]  J. Nie.  Precipitation and Hardening in Magnesium Alloys , 2012, Metallurgical and Materials Transactions A.

[49]  Liangfu Zheng,et al.  Microstructures and mechanical properties of Mg–10Gd–6Y–2Zn–0.6Zr(wt.%) alloy , 2011 .

[50]  J. Nie,et al.  Development of high-strength magnesium alloys via combined processes of extrusion, rolling and ageing , 2011 .

[51]  J. Meng,et al.  Effect of ageing treatment on the microstructures and mechanical properties of the extruded Mg-7Y-4Gd-1.5Zn-0.4Zr alloy , 2010 .

[52]  K. Hono,et al.  Solute segregation and precipitation in a creep-resistant Mg–Gd–Zn alloy , 2008 .

[53]  J. Gröbner,et al.  Selection of promising quaternary candidates from Mg–Mn–(Sc, Gd, Y, Zr) for development of creep-resistant magnesium alloys , 2001 .