The effect of NaOH concentration on the mechanical and physical properties of alkali activated fly ash-based artificial lightweight aggregate

[1]  Tiao Wang,et al.  A study of the influence of crystal component on the reactivity of low-calcium fly ash in alkaline conditions based on SEM-EDS , 2020 .

[2]  M. Hussain,et al.  Physico-mechanical performance and durability of artificial lightweight aggregates synthesized by cementing and geopolymerization , 2020 .

[3]  C. Poon,et al.  Compressive strength and microstructural properties of dry-mixed geopolymer pastes synthesized from GGBS and sewage sludge ash , 2018, Construction and Building Materials.

[4]  B. B. Das,et al.  Determination of optimized geopolymerization factors on the properties of pelletized fly ash aggregates , 2018 .

[5]  Mva Miruna Florea,et al.  Employing cold bonded pelletization to produce lightweight aggregates from incineration fine bottom ash , 2017 .

[6]  Tiainen,et al.  Development and incorporation of lightweight waste-based geopolymer aggregates in mortar and concrete , 2017 .

[7]  Nele De Belie,et al.  Sustainable High Quality Recycling of Aggregates from Waste-to-Energy, Treated in a Wet Bottom Ash Processing Installation, for Use in Concrete Products , 2015, Materials.

[8]  Yu-min Chang,et al.  Effect of solid-to-liquid ratios on the properties of waste catalyst-metakaolin based geopolymers , 2015 .

[9]  A. Sivakumar,et al.  Accelerated curing effects on the mechanical performance of cold bonded and sintered fly ash aggregate concrete , 2015 .

[10]  B. Karabulut,et al.  Examining the Effect of the Case Management Model on Patient Results in the Palliative Care of Patients With Cancer , 2014, The American journal of hospice & palliative care.

[11]  Gökhan Görhan,et al.  The influence of the NaOH solution on the properties of the fly ash-based geopolymer mortar cured at different temperatures , 2014 .

[12]  Mehmet Gesoǧlu,et al.  Durability aspect of concretes composed of cold bonded and sintered fly ash lightweight aggregates , 2013 .

[13]  K. Ramamurthy,et al.  Properties of geopolymerised low-calcium bottom ash aggregate cured at ambient temperature , 2013 .

[14]  V. Ducman,et al.  Characterisation of the pore-forming process in lightweight aggregate based on silica sludge by means of X-ray micro-tomography (micro-CT) and mercury intrusion porosimetry (MIP) , 2013 .

[15]  Kasım Mermerdaş,et al.  Effect of silica fume and steel fiber on the mechanical properties of the concretes produced with cold bonded fly ash aggregates , 2013 .

[16]  Y. M. Liew,et al.  Study on solids-to-liquid and alkaline activator ratios on kaolin-based geopolymers , 2012 .

[17]  Hugo Marcelo Veit,et al.  The effects of Na2O/SiO2 molar ratio, curing temperature and age on compressive strength, morphology and microstructure of alkali-activated fly ash-based geopolymers , 2011 .

[18]  Christopher R. Cheeseman,et al.  Properties and microstructure of lightweight aggregate produced from lignite coal fly ash and recycled glass , 2010 .

[19]  Prinya Chindaprasirt,et al.  Influence of NaOH solution on the synthesis of fly ash geopolymer , 2009 .

[20]  D. Bentz.  Influence of internal curing using lightweight aggregates on interfacial transition zone percolation and chloride ingress in mortars , 2009 .

[21]  K. Ramamurthy,et al.  Effect of curing method on characteristics of cold bonded fly ash aggregates , 2008 .

[22]  Mehmet Gesoǧlu,et al.  Effects of fly ash properties on characteristics of cold-bonded fly ash lightweight aggregates , 2007 .

[23]  J. Deventer,et al.  The geopolymerisation of alumino-silicate minerals , 2000 .

[24]  E. Garboczi,et al.  Potential use of lightweight aggregate (LWA) produced from bottom coal ash for internal curing of concrete systems , 2020 .

[25]  Z. Man,et al.  Concentration of NaOH and the Effect on the Properties of Fly Ash Based Geopolymer , 2016 .

[26]  S. Mishra,et al.  Development of synthetic aggregate using off-ASTM specification ashes , 2013 .

[27]  Hans-Joachim Feuerborn,et al.  Coal combustion products - A global perspective , 2013 .

[28]  T. Özturan,et al.  Characteristics of lightweight fly ash aggregates produced with different binders and heat treatments , 2011 .