Design of a Discrete-time Repetitive Controller for Periodic Disturbances

Since digital implementation of repetitive controllers is simpler than analog in many industrial applications, some design criteria for a discrete-time repetitive controller to suppress periodic disturbances within a  specified frequency range are presented. The small gain theorem is applied to perform the controller design for system stability. Upper and lower bounds of the discrete-time repetitive controller parameters that ensure the stability of the control system  and the tracking performance are derived based on the shaping of the sensitivity functional. Therefore, the repetitive controller is designed by the parameters in between upper and lower bounds. The control performance of the presented method is evaluated  in a turntable system which is exposed to periodic disturbances. Computer simulation is presented to illustrate the effectiveness of the proposed repetitive controller design.

[1]  Jun Liang,et al.  H ∞ repetitive control of DC-AC converters in micro-grids ∗ , 2022 .

[2]  Jun Liang,et al.  Repetitive Control of DC-AC Converters , 2004 .

[3]  T.S. Liu,et al.  H/sub /spl infin// repetitive control for pickup head flying height in near-field optical disk drives , 2005, IEEE Transactions on Magnetics.

[4]  Myung Jin Chung,et al.  Repetitive control design for linear systems with time-varying uncertainties , 2003 .

[5]  Byung-Sub Kim,et al.  Two-parameter robust repetitive control with application to a novel dual-stage actuator for noncircular Machining , 2004, IEEE/ASME Transactions on Mechatronics.

[6]  Masayoshi Tomizuka,et al.  Analysis and Synthesis of Discrete-Time Repetitive Controllers , 1989 .

[7]  Kyungbae Chang,et al.  Adaptive repetitive control for an eccentricity compensation of optical disk drivers , 2006, IEEE Transactions on Consumer Electronics.

[8]  Mi-Ching Tsai,et al.  Design of a plug-in type repetitive controller for periodic inputs , 2002, IEEE Trans. Control. Syst. Technol..

[9]  Tsu-Chin Tsao,et al.  Two-parameter robust repetitive control with application to a novel dual-stage actuator for noncircular Machining , 2004 .

[10]  S. Hara,et al.  Repetitive control system: a new type servo system for periodic exogenous signals , 1988 .

[11]  ZENGMing,et al.  ROBUST REPETITIVE CONTROL FOR IMPROVING RATE SMOOTHNESS OF TEST TURNTABLE , 2005 .

[12]  Yong He,et al.  Simultaneous Optimization of Low-pass Filter and Controller in Robust Repetitive Control Systems , 2007, 2007 IEEE International Conference on Mechatronics.

[13]  Masayoshi Tomizuka,et al.  Robust adaptive and repetitive digital tracking control and application to a hydraulic servo for noncircular machining , 1994 .