Development and performance of Cu-based oxygen carriers for chemical-looping combustion

Chemical-looping combustion (CLC) has the inherent property of separating the product CO{sub 2} from flue gases. Instead of air, it uses an oxygen carrier, usually in the form of a metal oxide, to provide oxygen for combustion. This paper focuses on the development and performance of a suitable Cu-based oxygen carrier for burning solid fuels using CLC. Carriers were made from CuO and Al{sub 2}O{sub 3} (as a support) in three different ways: mechanical mixing, wet impregnation, and co-precipitation. The reactivity of these solids was assessed by measuring their ability to oxidize CO, when in a hot bed of sand fluidized by a mixture of CO and N{sub 2}. After that, the Cu in the carrier was oxidized back to CuO by fluidizing the hot bed with air. These oxygen carriers were tested over many such cycles of reduction and oxidation. This work confirms that supporting CuO on Al{sub 2}O{sub 3} enhances the ability of the resulting particles to withstand mechanical and thermal stresses in a fluidized bed. Also, only co-precipitation produces particles that have a high loading of copper and do not agglomerate at 800-900 C. The performance of co-precipitated particles of CuO/Al{sub 2}O{sub 3} at oxidizing CO tomore » CO{sub 2} was significantly affected by the pH of the solution in which precipitation occurred: a high pH (9.7) gave particles that reacted completely and rapidly. After 18 cycles, such a co-precipitated carrier with 82.5 wt% CuO yielded all its oxygen when oxidizing CO. X-ray analysis showed that when heated, CuO reacted with Al{sub 2}O{sub 3} to form CuAl{sub 2}O{sub 4}, which was fully reducible, so CuO experienced no loss in extent of reaction after forming this mixed oxide. An increase in operating temperature from 800 to 900 C led to the CuO providing slightly less oxygen; this was because a little of the CuO decomposed to Cu{sub 2}O between its reduction and oxidation, when the bed was fluidized by pure N{sub 2}. (author)« less

[1]  L. F. de Diego,et al.  The Performance in a Fixed Bed Reactor of Copper-Based Oxides on Titania as Oxygen Carriers for Chemical Looping Combustion of Methane , 2005 .

[2]  Juan Adánez,et al.  Nickel−Copper Oxygen Carriers To Reach Zero CO and H2 Emissions in Chemical-Looping Combustion , 2006 .

[3]  E. Teller,et al.  ADSORPTION OF GASES IN MULTIMOLECULAR LAYERS , 1938 .

[4]  T. Mattisson,et al.  Redox investigation of some oxides of transition-state metals, Ni, Cu, Fe, and Mn Supported on SiO2 , 2005 .

[5]  A. Lyngfelt,et al.  Comparison of iron-, nickel-, copper- and manganese-based oxygen carriers for chemical-looping combustion , 2004 .

[6]  Sanford Gordon,et al.  NASA Glenn Coefficients for Calculating Thermodynamic Properties of Individual Species , 2002 .

[7]  S. D. Kim,et al.  Chemical-Looping Combustion with NiO and Fe2O3 in a Thermobalance and Circulating Fluidized Bed Reactor with Double Loops , 2006 .

[8]  M. Johansson,et al.  The use of NiO as an Oxygen Carrier in Chemical-Looping Combustion , 2006 .

[9]  E. Barrett,et al.  (CONTRIBUTION FROM THE MULTIPLE FELLOWSHIP OF BAUGH AND SONS COMPANY, MELLOX INSTITUTE) The Determination of Pore Volume and Area Distributions in Porous Substances. I. Computations from Nitrogen Isotherms , 1951 .

[10]  Anders Lyngfelt,et al.  Defluidization Conditions for a Fluidized Bed of Iron Oxide-, Nickel Oxide-, and Manganese Oxide-Containing Oxygen Carriers for Chemical-Looping Combustion , 2006 .

[11]  Juan Adánez,et al.  Impregnated CuO/Al2O3 Oxygen Carriers for Chemical-Looping Combustion: Avoiding Fluidized Bed Agglomeration , 2005 .

[12]  Navid Mostoufi,et al.  Numerical Methods for Chemical Engineers with MATLAB Applications with Cdrom , 1999 .

[13]  P. Fennell,et al.  The measurement of the rate of burning of different coal chars in an electrically heated fluidised bed of sand , 2007 .

[14]  Juan Adánez,et al.  Development of Cu-based oxygen carriers for chemical-looping combustion , 2004 .

[15]  A. Lyngfelt,et al.  Carbon Formation on Nickel and Iron Oxide-Containing Oxygen Carriers for Chemical-Looping Combustion , 2005 .

[16]  Stuart A. Scott,et al.  In situ gasification of a solid fuel and CO2 separation using chemical looping , 2006 .

[17]  Anders Lyngfelt,et al.  The use of petroleum coke as fuel in chemical-looping combustion , 2007 .

[18]  A. Lyngfelt,et al.  Reactivity of some metal oxides supported on alumina with alternating methane and oxygen - Application for chemical-looping combustion , 2003 .

[19]  Luis F. de Diego,et al.  Performance in a Fixed-Bed Reactor of Titania-Supported Nickel Oxide as Oxygen Carriers for the Chemical-Looping Combustion of Methane in Multicycle Tests , 2006 .