Robustness evaluation of high voltage Press Pack IGBT modules in enhanced short circuit test

The paper deals with the evaluation of robustness of high power Press Pack IGBT modules under short circuit conditions. The severity of the tests is usually related to the achievement of the real failure mode which drives the device to withstand a big amount of energy. The most and well known methods to evaluate the robustness of the devices have been analyzed and improved in order to operate with the highest achievable di/dt and to consequently emulate the real circuit setup and failure mode. Experimental tests will be shown and evaluated under different voltage and temperature conditions. The tests described in the paper have been targeted to evaluate the capability of the device to withstand extremely severe condition when they are used in a high power converter. A driving protection feature dealing with the target of improving the functionality of protection against failure will be also described.

[1]  B. J. Baliga,et al.  Modern Power Devices , 1987 .

[2]  R. Letor,et al.  Short circuit behaviour of IGBTs correlated to the intrinsic device structure and on the application circuit , 1992, Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting.

[3]  L. Kiraly,et al.  A discussion on IGBT short circuit behavior and fault protection schemes , 1993, Proceedings Eighth Annual Applied Power Electronics Conference and Exposition,.

[4]  S. Musumeci,et al.  Transient behavior of IGBTs submitted to fault under load conditions , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[5]  Munaf Rahimo,et al.  2.5kV-6.5kV Industry Standard IGBT Modules Setting a New Benchmark in SOA Capability , 2004 .

[6]  E. Blackmore,et al.  Analysis of high-power IGBT short circuit failures , 2004, IEEE Transactions on Plasma Science.

[7]  D. Schneider,et al.  On the operation of a press pack IGBT module under short circuit conditions , 2006, IEEE Transactions on Advanced Packaging.

[8]  A. Benmansour,et al.  Failure mechanisms of Trench IGBT under various short-circuit conditions , 2007, 2007 IEEE Power Electronics Specialists Conference.

[9]  Steffen Bernet,et al.  Characterization of a new 4.5 kV press pack SPT+ IGBT for medium voltage converters , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[10]  Hossin Hosseinian,et al.  Power Electronics , 2020, 2020 27th International Conference on Mixed Design of Integrated Circuits and System (MIXDES).