Outer approximation algorithm with physical domain reduction for computer-aided molecular and separation process design

Integrated approaches to the design of separation systems based on computer-aided molecular and process design (CAMPD) can yield an optimal solvent structure and process conditions. The underlying design problem, however, is a challenging mixed integer nonlinear problem, prone to convergence failure as a result of the strong and nonlinear interactions between solvent and process. To facilitate the solution of this problem, a modified outer-approximation (OA) algorithm is proposed. Tests that remove infeasible regions from both the process and molecular domains are embedded within the OA framework. Four tests are developed to remove subdomains where constraints on phase behavior that are implicit in process models or explicit process (design) constraints are violated. The algorithm is applied to three case studies relating to the separation of methane and carbon dioxide at high pressure. The process model is highly nonlinear, and includes mass and energy balances as well as phase equilibrium relations and physical property models based on a group-contribution version of the statistical associating fluid theory (SAFT-γ Mie) and on the GC+ group contribution method for some pure component properties. A fully automated implementation of the proposed approach is found to converge successfully to a local solution in 30 problem instances. The results highlight the extent to which optimal solvent and process conditions are interrelated and dependent on process specifications and constraints. The robustness of the CAMPD algorithm makes it possible to adopt higher-fidelity nonlinear models in molecular and process design. © 2016 The Authors AIChE Journal published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers AIChE J, 62: 3484–3504, 2016

[1]  Mario R. Eden,et al.  A Property Based Approach for Simultaneous Process and Molecular Design , 2008 .

[2]  Feng-Sheng Wang,et al.  Computer-aided biocompatible solvent design for an integrated extractive fermentation–separation process , 2010 .

[3]  Rafiqul Gani,et al.  Computer-aided molecular design with combined molecular modeling and group contribution , 1999 .

[4]  Claire S. Adjiman,et al.  The HELD algorithm for multicomponent, multiphase equilibrium calculations with generic equations of state , 2012, Comput. Chem. Eng..

[5]  C. Adjiman,et al.  Designing optimal mixtures using generalized disjunctive programming: Hull relaxations , 2017 .

[6]  Sten Bay Jørgensen,et al.  A novel framework for simultaneous separation process and product design , 2004 .

[7]  Luke E. K. Achenie,et al.  On the use of a mixed integer non-linear programming model for refrigerant design , 1997 .

[8]  Ignacio E. Grossmann,et al.  Prosyn — An automated topology and parameter process synthesizer , 1994 .

[9]  A. M. Geoffrion.  Generalized Benders decomposition , 1972 .

[10]  George Jackson,et al.  Statistical associating fluid theory for chain molecules with attractive potentials of variable range , 1997 .

[11]  André Bardow,et al.  A Continuous Targeting Approach for Integrated Solvent and Process Design Based on Molecular Thermodynamic Models , 2009 .

[12]  Patrick Linke,et al.  Toward Optimum Working Fluid Mixtures for Organic Rankine Cycles using Molecular Design and Sensitivity Analysis , 2013 .

[13]  C. Adjiman,et al.  A feasibility-based algorithm for Computer Aided Molecular and Process Design of solvent-based separation systems , 2016 .

[14]  Mario R. Eden,et al.  An algebraic approach for simultaneous solution of process and molecular design problems , 2010 .

[15]  Ignacio E. Grossmann,et al.  An equation-oriented approach for handling thermodynamics based on cubic equation of state in process optimization , 2010, Comput. Chem. Eng..

[16]  Ignacio E. Grossmann,et al.  An outer-approximation algorithm for a class of mixed-integer nonlinear programs , 1986, Math. Program..

[17]  Efstratios N. Pistikopoulos,et al.  Optimal design of solvent blends for environmental impact minimization , 1999 .

[18]  George Jackson,et al.  Group contribution methodology based on the statistical associating fluid theory for heteronuclear molecules formed from Mie segments. , 2014, The Journal of chemical physics.

[19]  Wolfgang Marquardt,et al.  A Hybrid Evolutionary–Deterministic Optimization Approach for Conceptual Design , 2015 .

[20]  George Jackson,et al.  THE THERMODYNAMICS OF MIXTURES AND THE CORRESPONDING MIXING RULES IN THE SAFT-VR APPROACH FOR POTENTIALS OF VARIABLE RANGE , 1998 .

[21]  Kai Sundmacher,et al.  A hybrid stochastic–deterministic optimization approach for integrated solvent and process design , 2017 .

[22]  Aage Fredenslund,et al.  Group‐contribution estimation of activity coefficients in nonideal liquid mixtures , 1975 .

[23]  D. Macleod.  On a relation between surface tension and density , 1923 .

[24]  Efstratios N. Pistikopoulos,et al.  Optimal solvent design for environmental impact minimization , 1998 .

[25]  Rafiqul Gani,et al.  A systematic synthesis framework for extractive distillation processes , 2008 .

[26]  John White,et al.  Simultaneous design of ionic liquid entrainers and energy efficient azeotropic separation processes , 2012, Comput. Chem. Eng..

[27]  G. Kontogeorgis,et al.  Thermodynamic Models for Industrial Applications: From Classical and Advanced Mixing Rules to Association Theories , 2010 .

[28]  Wolfgang Marquardt,et al.  Efficient optimization-based design for the separation of heterogeneous azeotropic mixtures , 2015, Comput. Chem. Eng..

[29]  Nikolaos V. Sahinidis,et al.  Optimization‐based framework for computer‐aided molecular design , 2013 .

[30]  Patrick Linke,et al.  A Unified Framework for Integrated Process and Molecular Design , 2005 .

[31]  André Bardow,et al.  Continuous-Molecular Targeting for Integrated Solvent and Process Design , 2010 .

[32]  E. Gilles,et al.  Reinitialization of DAE's after discontinuities , 1995 .

[33]  Sven Leyffer,et al.  Solving mixed integer nonlinear programs by outer approximation , 1994, Math. Program..

[34]  André Bardow,et al.  Simultaneous process and working fluid optimisation for Organic Rankine Cycles (ORC) using PC-SAFT , 2012 .

[35]  Claire S. Adjiman,et al.  Optimal Solvent Design for Batch Separation Based on Economic Performance , 2003 .

[36]  André Bardow,et al.  1-stage CoMT-CAMD: An approach for integrated design of ORC process and working fluid using PC-SAFT , 2017 .

[37]  Claire S. Adjiman,et al.  Chapter 11 - Toward Sustainable Solvent-Based Postcombustion CO2 Capture: From Molecules to Conceptual Flowsheet Design , 2015 .

[38]  Claire S. Adjiman,et al.  Optimization Methods in CAMD – II , 2003 .

[39]  N. Chemmangattuvalappil,et al.  A Novel Methodology for Property-Based Molecular Design Using Multiple Topological Indices , 2013 .

[40]  Sandro Macchietto,et al.  Computer aided molecular design: a novel method for optimal solvent selection , 1993 .

[41]  S. Sastri,et al.  A new group contribution method for predicting viscosity of organic liquids , 1992 .

[42]  Rafiqul Gani,et al.  A New Decomposition-Based Computer-Aided Molecular/Mixture Design Methodology for the Design of Optimal Solvents and Solvent Mixtures , 2005 .

[43]  Gürkan Sin,et al.  Group-contribution+ (GC+) based estimation of properties of pure components: Improved property estimation and uncertainty analysis , 2012 .

[44]  Gabriele Sadowski,et al.  Perturbed-Chain SAFT: An Equation of State Based on a Perturbation Theory for Chain Molecules , 2001 .

[45]  Rafiqul Gani,et al.  Design of environmentally benign processes: integration of solvent design and separation process synthesis , 1999 .

[46]  André Bardow,et al.  Computer-aided molecular design in the continuous-molecular targeting framework using group-contribution PC-SAFT , 2015, Comput. Chem. Eng..

[47]  George Jackson,et al.  New reference equation of state for associating liquids , 1990 .

[48]  Kai Sundmacher,et al.  Integrated solvent and process design exemplified for a Diels–Alder reaction , 2014 .

[49]  Rafiqul Gani,et al.  SEPARATION PROCESS DESIGN AND SYNTHESIS BASED ON THERMODYNAMIC INSIGHTS , 1995 .

[50]  Clare McCabe,et al.  Chapter 8:SAFT Associating Fluids and Fluid Mixtures , 2010 .

[51]  Christopher M. A. Parlett,et al.  Reports of meetings , 1967 .

[52]  Klaus Schittkowski,et al.  A trust region SQP algorithm for mixed-integer nonlinear programming , 2007, Optim. Lett..

[53]  Paul T. Akula,et al.  The formulation of optimal mixtures with generalized disjunctive programming: A solvent design case study , 2016 .

[54]  Claire S. Adjiman,et al.  Molecules Matter: The Expanding Envelope of Process Design , 2014 .

[55]  Patrick Linke,et al.  Multiobjective molecular design for integrated process‐solvent systems synthesis , 2006 .

[56]  C. Adjiman,et al.  Computer-aided molecular design of solvents for accelerated reaction kinetics. , 2013, Nature chemistry.

[57]  Patrick Linke,et al.  A framework for the integration of solvent and process design with controllability assessment , 2017 .

[58]  Claire S. Adjiman,et al.  Integrated solvent and process design using a SAFT-VR thermodynamic description: High-pressure separation of carbon dioxide and methane , 2011, Comput. Chem. Eng..

[59]  C. Adjiman,et al.  A hierarchical method to integrated solvent and process design of physical CO2 absorption using the SAFT‐γ Mie approach , 2015 .

[60]  George Jackson,et al.  SAFT: Equation-of-state solution model for associating fluids , 1989 .

[61]  Esteban A. Brignole,et al.  Computer‐aided molecular design of solvents for separation processes , 1994 .

[62]  K. K. Lau,et al.  Impact of high pressure on high concentration carbon dioxide capture from natural gas by monoethanolamine/N-methyl-2-pyrrolidone solvent in absorption packed column , 2015 .

[63]  Georgios M. Kontogeorgis,et al.  Thermodynamic Models for Industrial Applications , 2010 .

[64]  I. Grossmann,et al.  Disjunctive Programming Models for the Optimal Design of Distillation Columns and Separation Sequences , 2000 .

[65]  Patrick Linke,et al.  Efficient integration of optimal solvent and process design using molecular clustering , 2006 .