Exploring the uncertainty in capacity estimation at roundabouts

PurposeIn gap-acceptance theory the critical and the follow-up headways have a significant role in determining roundabout entry capacities which in turn depend on circulating flow rates under a specified arrival headway distribution. Calculation considers single mean values of the gap-acceptance parameters, neglecting the inherent variations in these random variables and providing a single value of entry capacity. The purpose of this paper is to derive the entry capacity distribution which accounts for the variations of the contributing (random) variables and suggest how to consider this issue in the operational analysis of the roundabouts.MethodsWe performed a Monte Carlo simulation to get the distribution of entry capacity and found Crystal Ball software effective for performing the random sampling from the probability density functions of each contributing parameter. A steady-state model of capacity was used for performing many runs; in each run, the values of each contributing parameter were randomly drawn from the corresponding distributions.ResultsThe paper presents the first simulations and the entry capacity distributions at roundabouts, once the probability distributions of the headways were assumed. The results of the analysis were expressed probabilistically, meaning that the probability distributions of capacity rather than the simple point estimates were obtained.ConclusionsComparing the capacity values based on a meta-analytic estimation of critical and follow-up headways and the capacity functions based on the probability distributions of the model parameters, more insights in developing an appropriate approach to capacity estimation at roundabouts can be gained.

[1]  D. Altman,et al.  Measuring inconsistency in meta-analyses , 2003, BMJ : British Medical Journal.

[2]  Zong Tian,et al.  Example Analysis and Handling of Uncertainty in the Highway Capacity Manual with Consideration of Traffic Diversion , 2003 .

[3]  Laura Uusitalo,et al.  An overview of methods to evaluate uncertainty of deterministic models in decision support , 2015, Environ. Model. Softw..

[4]  Larry V. Hedges,et al.  Fixed‐Effect Versus Random‐Effects Models , 2009, Introduction to Meta‐Analysis.

[5]  Rune Elvik,et al.  Corrigendum to: “Publication bias and time-trend bias in meta-analysis of bicycle helmet efficacy: a re-analysis of Attewell, Glase and McFadden, 2001” [Accid. Anal. Prev. 43 (2011) 1245–1251]. , 2013, Accident; analysis and prevention.

[6]  Zong Tian,et al.  Operational analysis of the contraflow left-turn lane design at signalized intersections in China , 2016 .

[7]  M S Raff,et al.  A VOLUME WARRANT FOR URBAN STOP SIGNS , 1950 .

[8]  Raffaele Mauro,et al.  Calculation of Roundabouts , 2010 .

[9]  Shing Chung Josh Wong,et al.  Capacity evaluation of multi-lane traffic roundabout , 2010 .

[10]  Nigel Waters,et al.  Review of remote sensing methodologies for pavement management and assessment , 2015 .

[11]  Nagui M. Rouphail,et al.  Comparison of Capacity Models for Two-Lane Roundabouts , 2003 .

[12]  Anna Matas,et al.  Traffic forecasts under uncertainty and capacity constraints , 2009 .

[13]  J. C. Helton,et al.  An Investigation of Uncertainty and Sensitivity Analysis Techniques for Computer Models , 1988 .

[14]  Walter M. Grayman,et al.  Incorporating Uncertainty and Variability in Engineering Analysis , 2005 .

[15]  George F. List,et al.  Roundabouts in the United States , 2007 .

[16]  W. G. Cochran.  The comparison of percentages in matched samples. , 1950, Biometrika.

[17]  Werner Brilon,et al.  USEFUL ESTIMATION PROCEDURES FOR CRITIAL GAPS. , 1997 .

[18]  Michael P Dixon,et al.  Why Field Measurements Differ from Model Estimates: Analysis Framework for Capacity and Level-of-Service Analysis of Unsignalized Intersections , 2003 .

[19]  Orazio Giuffrè,et al.  Gap-accepteance parameters for roundabouts: a systematic review , 2015 .

[20]  Hari Krishna Gaddam,et al.  Comparative evaluation of roundabout capacities under heterogeneous traffic conditions , 2015 .

[21]  Wayne Kittelson,et al.  IMPLEMENTING THE MAXIMUM LIKELIHOOD METHODOLOGY TO MEASURE DRIVER'S CRITICAL GAP , 1997 .

[22]  Mahmoud Ameri,et al.  Determination the capacity of two-lane suburban roads with neural networks and effect of speed on level of service , 2013 .

[23]  L. Hedges,et al.  Introduction to Meta‐Analysis , 2009, International Coaching Psychology Review.

[24]  Rune Elvik,et al.  Publication bias and time-trend bias in meta-analysis of bicycle helmet efficacy: a re-analysis of Attewell, Glase and McFadden, 2001. , 2011, Accident; analysis and prevention.

[25]  Lambertus Gerrit Hendrik Fortuijn,et al.  Turbo Roundabouts , 2009 .

[26]  Tomaž Tollazzi,et al.  Alternative Types of Roundabouts , 2015 .

[27]  M. A. Herrador,et al.  Uncertainty evaluation from Monte-Carlo simulations by using Crystal-Ball software , 2005 .

[28]  J. Raymond,et al.  Traffic forecasts under uncertainty and capacity constraints , 2012 .

[29]  R. J. Troutbeck,et al.  Average Delay at an Unsignalized Intersection with Two Major Streams Each Having a Dichotomized Headway Distribution , 1986, Transp. Sci..

[30]  D. Vose.  Risk Analysis: A Quantitative Guide , 2000 .

[31]  Rod Troutbeck,et al.  RECENT AUSTRALIAN UNSIGNALISED INTERSECTION RESEARCH AND PRACTICES , 1991 .

[32]  Bruce Robinson,et al.  CAPACITY AND LEVEL OF SERVICE AT UNSIGNALIZED INTERSECTIONS. FINAL REPORT. VOLUME 2 - ALL-WAY STOP-CONTROLLED INTERSECTIONS , 1996 .

[33]  Lixing Yang,et al.  Analysis of order statistics of uncertain variables , 2015 .

[34]  Jonathan M. Bunker.  Novel methods and the maximum likelihood estimation technique for estimating traffic critical gap , 2014 .

[35]  S. Siegel,et al.  Nonparametric Statistics for the Behavioral Sciences , 2022, The SAGE Encyclopedia of Research Design.

[36]  William M. Bulleit,et al.  Uncertainty in Structural Engineering , 2008 .

[37]  Abhijit Mukherjee,et al.  Characterisation of road bumps using smartphones , 2016 .

[38]  Larry B. Wallnau,et al.  Statistics for the Behavioral Sciences , 1985 .

[39]  Reginald R. Souleyrette,et al.  Gap acceptance parameters for HCM 2010 roundabout capacity model applications in Italy , 2013 .

[40]  R M Kimber,et al.  THE TRAFFIC CAPACITY OF MAJOR/MINOR PRIORITY JUNCTIONS , 1980 .