Investigation of Bolt Group Configurations on Load Distribution and Joint Failure

This article presents the results of an investigation into the failure of bolted joints in thin composite panels. The experimental investigations and comparisons of two different bolt group configurations (single row and staggered row) subjected to uniaxial loading are presented. Finite element analysis (FEA) is utilized to find the optimum bolt and edge distance arrangement. By understanding the link between modes of failure and bolt arrangement, failure modes can become part of the design specification or criteria. The article also gives some insight into load distribution and transfer between bolts and panels and their failure mechanism in composite panels.

[1]  MINISTRY OF DEFENCE,et al.  The Strength of Bolted Joints in Multi-Directional CFRP Laminates , 1975 .

[2]  Ray Kai Leung Su,et al.  Nonlinear response of bolt groups under in-plane loading , 2007 .

[3]  M. A. McCarthy,et al.  Experiences with Modeling Friction in Composite Bolted Joints , 2005 .

[4]  Som R. Soni,et al.  Failure Analysis of Composite Laminates with a Fastener Hole. , 1981 .

[5]  F. L. Matthews,et al.  Delamination Onset Prediction in Mechanically Fastened Joints in Composite Laminates , 1999 .

[6]  M. A. McCarthy,et al.  Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints: Part II––effects of bolt-hole clearance , 2005 .

[7]  M. A. McCarthy,et al.  Progressive damage analysis of multi-bolt composite joints with variable bolt–hole clearances , 2005 .

[8]  T. A. Collings,et al.  On the bearing strengths of cfrp laminates , 1982 .

[9]  Johan Ekh,et al.  Secondary Bending in Multi Fastener, Composite-to-Aluminium Single Shear Lap Joints , 2005 .

[10]  M. W. Hyer,et al.  Failure criterion for thick multifastener graphite-epoxy composite joints , 1995 .

[11]  Surachate Chutima,et al.  Stress distributions in multi-fastened composite plates , 1996 .

[12]  Heung-Joon Park,et al.  Bearing failure analysis of mechanically fastened joints in composite laminates , 2001 .

[13]  Heung-Joon Park,et al.  Effects of stacking sequence and clamping force on the bearing strengths of mechanically fastened joints in composite laminates , 2001 .

[14]  Conor T. McCarthy,et al.  A global bolted joint model for finite element analysis of load distributions in multi-bolt composite joints , 2010 .

[15]  Srinivasa D. Thoppul,et al.  Mechanics of mechanically fastened joints in polymer–matrix composite structures – A review , 2009 .

[16]  F. L. Matthews,et al.  A Progressive Damage Model for Mechanically Fastened Joints in Composite Laminates , 1999 .

[17]  Johan Ekh,et al.  Load Transfer in Multirow, Single Shear, Composite-to-Aluminium Lap Joints , 2006 .

[18]  Hiroyuki Hamada,et al.  Effects of Stacking Sequences on Mechanically Fastened Joint Strength in Quasi-Isotropic Carbon-Epoxy Laminates , 1995 .

[19]  Onur Sayman,et al.  Experimental failure analysis of mechanically fastened joints with clearance in composite laminates under preload , 2008 .

[20]  J. Eisenmann,et al.  Improving composite bolted joint efficiency by laminate tailoring , 1981 .

[21]  M. A. McCarthy,et al.  Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints: part I—model development and validation , 2005 .

[22]  Tomas Ireman,et al.  Three-dimensional stress analysis of bolted single-lap composite joints , 1998 .

[23]  Wen-Hwa Chen,et al.  Three-dimensional contact stress analysis of a composite laminate with bolted joint , 1995 .

[24]  Zhiye Zhao,et al.  Analysis of mechanically fastened composite joints by boundary element methods , 2000 .