Numerical Research on the Cold Start-up Strategy of a PEMFC Stack from −30°C

[1]  W. Tao,et al.  A comparative study: The effect of current loading modes on the cold start-up process of PEMFC stack , 2021, Energy Conversion and Management.

[2]  K. Jiao,et al.  Numerical investigations of assisted heating cold start strategies for proton exchange membrane fuel cell systems , 2021 .

[3]  Tiancai Ma,et al.  Investigation on the Operating Conditions of Proton Exchange Membrane Fuel Cell Based on Constant Voltage Cold Start Mode , 2021, Energies.

[4]  L. Hao,et al.  Numerical Study of the Cold-Start Process of PEM Fuel Cells with Different Current Density Operating Modes , 2020 .

[5]  Sousso Kelouwani,et al.  Efficient model selection for real-time adaptive cold start strategy of a fuel cell system on vehicular applications , 2020 .

[6]  Sichuan Xu,et al.  A Progress Review on Heating Methods and Influence Factors of Cold Start for Automotive PEMFC System , 2020 .

[7]  W. Tao,et al.  Lattice Boltzmann method simulation of ice melting process in the gas diffusion layer of fuel cell , 2020 .

[8]  Yun Wang,et al.  Materials, technological status, and fundamentals of PEM fuel cells – A review , 2020, Materials Today.

[9]  S. Kelouwani,et al.  An Adaptive Cold Start Strategy of Proton Exchange Membrane Fuel Cell Based on Maximum Power Mode , 2019, 2019 IEEE Vehicle Power and Propulsion Conference (VPPC).

[10]  J. W. Park,et al.  On the water transport behavior and phase transition mechanisms in cold start operation of PEM fuel cell , 2019, Applied Energy.

[11]  Zhengkai Tu,et al.  Progress on design and development of polymer electrolyte membrane fuel cell systems for vehicle applications: A review , 2018, Fuel Processing Technology.

[12]  Chao Qin,et al.  A comprehensive review on hybrid power system for PEMFC-HEV: Issues and strategies , 2018, Energy Conversion and Management.

[13]  Sousso Kelouwani,et al.  Real time adaptive efficient cold start strategy for proton exchange membrane fuel cells , 2018 .

[14]  Abdul-Ghani Olabi,et al.  Developments in fuel cell technologies in the transport sector , 2016 .

[15]  Sousso Kelouwani,et al.  A Comprehensive Review of Solutions and Strategies for Cold Start of Automotive Proton Exchange Membrane Fuel Cells , 2016, IEEE Access.

[16]  Detlef Stolten,et al.  Fuel Cells : Data, Facts and Figures , 2016 .

[17]  Geonhui Gwak,et al.  A rapid start-up strategy for polymer electrolyte fuel cells at subzero temperatures based on control of the operating current density , 2015 .

[18]  Qing Du,et al.  Catalytic hydrogen–oxygen reaction in anode and cathode for cold start of proton exchange membrane fuel cell , 2015 .

[19]  Liejin Guo,et al.  A study on current overshoot during start-ups and optimal start-up strategy of proton exchange membrane fuel cells , 2015 .

[20]  Kui Jiao,et al.  Elucidating the constant power, current and voltage cold start modes of proton exchange membrane fuel cell , 2014 .

[21]  Qing Du,et al.  Maximum power cold start mode of proton exchange membrane fuel cell , 2014 .

[22]  Kui Jiao,et al.  Modeling of cold start processes and performance optimization for proton exchange membrane fuel cell stacks , 2014 .

[23]  Hyunchul Ju,et al.  Comparison of numerical simulation results and experimental data during cold-start of polymer electrolyte fuel cells , 2012 .

[24]  Jason B. Siegel,et al.  Modeling and experiments of voltage transients of polymer electrolyte membrane fuel cells with the dead-ended anode , 2012 .

[25]  Yutaka Tabe,et al.  Ice Formation and Current Distribution in the Catalyst Layer of PEM Fuel Cell at Cold Start , 2011 .

[26]  Xianguo Li,et al.  Water transport in polymer electrolyte membrane fuel cells , 2011 .

[27]  Andrei A. Kulikovsky,et al.  Analytical Modelling of Fuel Cells , 2010 .

[28]  Chao-Yang Wang,et al.  Current Ramping: A Strategy for Rapid Start-up of PEMFCs from Subfreezing Environment , 2010 .

[29]  Xianguo Li,et al.  Effects of various operating and initial conditions on cold start performance of polymer electrolyte membrane fuel cells , 2009 .

[30]  Trung Van Nguyen,et al.  Three-Dimensional Simulation of Liquid Water Distribution in a PEMFC with Experimentally Measured Capillary Functions , 2007 .

[31]  H. Meng.  Numerical investigation of transient responses of a PEM fuel cell using a two-phase non-isothermal mixed-domain model , 2007 .

[32]  Chao-Yang Wang,et al.  Effects of operating and design parameters on PEFC cold start , 2007 .

[33]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[34]  Thomas J. Dursch,et al.  Ice-Crystallization Kinetics in the Catalyst Layer of a Proton-Exchange-Membrane Fuel Cell , 2014 .