Experimental and numerical investigations of a soft projectile impact three-point bending (SPITPB) test for adhesion assessment under dynamic loading

[1]  Michele Meo,et al.  Low- and high-fidelity modeling of sandwich-structured composite response to bird strike, as tools for a digital-twin-assisted damage diagnosis , 2022 .

[2]  S. Hallett,et al.  Experimental investigation of large-scale high-velocity soft-body impact , 2021, International Journal of Impact Engineering.

[3]  L. Kawashita,et al.  Soft body impact on composites: Delamination experiments and advanced numerical modelling , 2021 .

[4]  F. Lauro,et al.  Development of a mixed mode double cantilever beam specimen for the fracture characterization of adhesives under high displacement rate , 2021, Engineering Fracture Mechanics.

[5]  P. Longère,et al.  A constitutive model for a rate and temperature-dependent, plastically anisotropic titanium alloy , 2020, International Journal of Plasticity.

[6]  F. Lauro,et al.  Fracture rate dependency of an adhesive under dynamic loading , 2020 .

[7]  D. Weisz-Patrault,et al.  Identification of the material behavior of adhesive joints under dynamic multiaxial loadings , 2019, International Journal of Impact Engineering.

[8]  J. Dear,et al.  Experimental and numerical investigation of high velocity soft impact loading on aircraft materials , 2019, Aerospace Science and Technology.

[9]  C. Bădulescu,et al.  Cluster analysis of acoustic emission data to investigate the damage evolution in modified scarf joint under bi-axial loading , 2018, The Journal of Adhesion.

[10]  J. Dear,et al.  Effect of the polymer interlayer on the high-velocity soft impact response of laminated glass plates , 2018, International Journal of Impact Engineering.

[11]  D. Nandlall,et al.  On the determination of the shock and steady state parameters of gelatine from cylinder impact experiments , 2018, International Journal of Impact Engineering.

[12]  D. Weisz-Patrault,et al.  A New Multiaxial Specimen for Determining the Dynamic Properties of Adhesive Joints , 2018, Experimental Mechanics.

[13]  L. Silva,et al.  Static assessment of the mixed-mode behaviour of three epoxy adhesives , 2017 .

[14]  F. Allaeys,et al.  Numerical and experimental investigation of the shock and steady state pressures in the bird material during bird strike , 2017 .

[15]  F. Lauro,et al.  Failure stress criterion for adhesively bonded joint at different strain rates by using dynamic Arcan test device , 2015 .

[16]  Yulong Li,et al.  Bird Strike on a Flat Plate: Experiments and Numerical Simulations , 2014 .

[17]  C. Bădulescu,et al.  On the experimental Mixed-Mode failure of adhesively bonded metallic joints , 2014 .

[18]  Rade Vignjevic,et al.  A parametric study of bird strike on engine blades , 2013 .

[19]  Leye M. Amoo,et al.  On the design and structural analysis of jet engine fan blade structures , 2013 .

[20]  Ivica Smojver,et al.  Advanced modelling of bird strike on high lift devices using hybrid Eulerian–Lagrangian formulation , 2012 .

[21]  Sebastian Heimbs,et al.  Review: Computational methods for bird strike simulations: A review , 2011 .

[22]  Laurent Berthe,et al.  State-of-the-art laser adhesion test (LASAT) , 2011 .

[23]  Steve Vanlanduit,et al.  Optical measurement of the dynamic strain field of a fan blade using a 3D scanning vibrometer , 2011 .

[24]  Ivica Smojver,et al.  Bird strike damage analysis in aircraft structures using Abaqus/Explicit and coupled Eulerian Lagrangian approach , 2011 .

[25]  W. S. Teo,et al.  The fracture behaviour of structural adhesives under high rates of testing , 2009 .

[26]  Peter Middendorf,et al.  Low velocity impact on CFRP plates with compressive preload: Test and modelling , 2009 .

[27]  R. Mahnken,et al.  Simulation of strength difference in elasto‐plasticity for adhesive materials , 2005 .

[28]  Jun Qu,et al.  Friction and wear of titanium alloys sliding against metal, polymer, and ceramic counterfaces , 2005 .

[29]  E. Deletombe,et al.  Assessment of multi-physics FE methods for bird strike modelling-Application to a metallic riveted airframe , 2002 .

[30]  James L. Rand,et al.  The Development of a Substitute Bird Model , 1981 .

[31]  Yu. A. Korostelev,et al.  Measurement of Resonance Vibrations of Turbine Blades with the Elura Device , 1978 .

[32]  R. Johns,et al.  FOD impact testing of composite fan blades , 1974 .

[33]  M. Brede,et al.  Rate dependent behavior of crash-optimized adhesives – Experimental characterization, model development, and simulation , 2015 .

[34]  S. Itoh,et al.  Study on Expansion of a Silicon Tube by Underwater Shock Wave , 2009 .

[35]  B. Davidson,et al.  A single leg bending test for interfacial fracture toughness determination , 1996 .