Characterization of rapid PDMS casting technique utilizing molding forms fabricated by 3D rapid prototyping technology (RPT)

In this work we characterize a novel possibility for PDMS (PolyDiMethylSiloxane) casting/ micromolding methods with the utilization of molding forms fabricated by a commercially available novel acrylic photopolymer based 3D printing method. The quality and absolute spatial accuracy of 1) different 3D printing modes (‘matt’ vs. ‘glossy’); 2) the molded PDMS structures and 3) the subsequently produced complementary structures made of epoxy resin were investigated. The outcome of these two form transfer technologies were evaluated by the cross sectional analysis of open microfluidic channels (trenches) with various design. Our results reveal the spatial accuracy in terms of real vs. CAD (Computer Aided Design) values for the 3D printed acrylic structures and the limits of their form transfer to PDMS, then to epoxy structures. Additionally the significant differences between the various spatial directions (X, Y, Z) have been characterized, and the conclusion was drawn that the ‘glossy’ printing mode is not appropriate for 3D printing of microfluidic molds.

[1]  J. Faber,et al.  Rapid prototyping as a tool for diagnosis and treatment planning for maxillary canine impaction. , 2006, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[2]  George M Whitesides,et al.  Prototyping of microfluidic devices in poly(dimethylsiloxane) using solid-object printing. , 2002, Analytical chemistry.

[3]  Felice Festa,et al.  Rapid prototyping: a new method of preparing trays for indirect bonding. , 2006, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[4]  Bruce K Gale,et al.  Rapid prototyping of microfluidic systems using a PDMS/polymer tape composite. , 2009, Lab on a chip.

[5]  Milan Vala,et al.  Compact and low-cost biosensor based on novel approach to spectroscopy of surface plasmons. , 2009, Biosensors & bioelectronics.

[6]  Guolin Xu,et al.  Separation of model mixtures of epsilon-globin positive fetal nucleated red blood cells and anucleate erythrocytes using a microfluidic device. , 2010, Journal of chromatography. A.

[7]  Kristi S. Anseth,et al.  3D Polymeric Microfluidic Device Fabrication via Contact Liquid Photolithographic Polymerization (CLiPP) , 2006 .

[8]  Jaephil Do,et al.  Maskless writing of microfluidics: Rapid prototyping of 3D microfluidics using scratch on a polymer substrate , 2011 .

[9]  Duoduo Bao,et al.  Print-and-Peel Fabrication for Microfluidics: What’s in it for Biomedical Applications? , 2009, Annals of Biomedical Engineering.

[10]  Jackie Y Ying,et al.  Hydrodynamic spinning of hydrogel fibers. , 2010, Biomaterials.

[11]  Adir Cohen,et al.  Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology. , 2009, Oral surgery, oral medicine, oral pathology, oral radiology, and endodontics.

[12]  Jeng-Rong Ho,et al.  Fabrication of PDMS (polydimethylsiloxane) microlens and diffuser using replica molding , 2006 .

[13]  Yu-Hwa Lo,et al.  UV/ozone modification of poly(dimethylsiloxane) microfluidic channels , 2004 .

[14]  Adrien Plecis,et al.  Improved glass-PDMS-glass device technology for accurate measurements of electro-osmotic mobilities , 2008 .

[15]  John D Carroll,et al.  Use of rapid prototyping in the care of patients with structural heart disease. , 2008, Trends in cardiovascular medicine.

[16]  D. Beebe,et al.  PDMS bonding by means of a portable, low-cost corona system. , 2006, Lab on a chip.

[17]  Gábor Harsányi,et al.  3D Rapid Prototyping Technology (RPT) as a powerful tool in microfluidic development , 2010 .