论文信息 - From AC quantum voltmeter to quantum calibrator

From AC quantum voltmeter to quantum calibrator

The AC Quantum Voltmeter, which was a breakthrough as an accredited, industrial-tested, fast and easy-to-use DC and AC voltage quantum-based calibrating system, has now been taken one step further with new extensive capabilities covering resistance and current measurements. Using equipment readily available in calibration laboratories, the new Quantum Calibrator covers a wide range of resistance by means of ratio measurement on a set of standard resistors. The same set of resistors is used for calibrating the current output of commercial calibrators, where the current is applied on a resistor and the output voltage is measured with the Josephson voltage standard.

[1] Marco Schubert,et al. An AC Josephson Voltage Standard up to the Kilohertz Range Tested in a Calibration Laboratory , 2015, IEEE Transactions on Instrumentation and Measurement.

[2] C. Hamilton,et al. Josephson D/A converter with fundamental accuracy , 1995 .

[3] R. Behr,et al. NbSi Barrier Junctions Tuned for Metrological Applications up to 70 GHz: 20 V Arrays for Programmable Josephson Voltage Standards , 2013, IEEE Transactions on Applied Superconductivity.

[4] Ralf Behr,et al. Development and metrological applications of Josephson arrays at PTB , 2012 .

[5] Ralf Behr,et al. Measuring resistance standards in terms of the quantised Hall resistance with a dual Josephson voltage standard using SINIS Josephson arrays , 2002, CPEM 2002.

[6] Bengt-Olof Andersson,et al. A simple build-up method for the DC voltage scale of a source , 2012, 2012 Conference on Precision electromagnetic Measurements.

[7] Ralf Behr,et al. An ac quantum voltmeter based on a 10 V programmable Josephson array , 2013 .