Corrosion behavior of spangle on a batch hot-dip galvanized Zn-0.05Al-0.2Sb coating in 3.5 wt.% NaCl solution

[1]  E. Tada,et al.  Electrochemical monitoring of the degradation of galvanized steel in simulated marine atmosphere , 2019, Corrosion Science.

[2]  Chun-shan Che,et al.  Influence of Nd addition on the corrosion behavior of Zn-5%Al alloy in 3.5wt.% NaCl solution , 2017 .

[3]  Lai‐Chang Zhang,et al.  Surface characteristics and corrosion resistance of spangle on hot-dip galvanized coating , 2017 .

[4]  Lai‐Chang Zhang,et al.  Improved corrosion behaviour of electron beam melted Ti-6Al-4V alloy in phosphate buffered saline , 2017 .

[5]  Lai‐Chang Zhang,et al.  Corrosion behaviour of selective laser melted Ti-TiB biocomposite in simulated body fluid , 2017 .

[6]  Lai‐Chang Zhang,et al.  Aluminum and antimony segregation on a batch hot-dip galvanized Zn-0.05Al-0.2Sb coating , 2017 .

[7]  W. Ke,et al.  Effect of Sb-Rich Intermetallic Phase on the CorrosionResistance of Zn Alloy in Near-Neutral and Acidic Solutions , 2016 .

[8]  Lai‐Chang Zhang,et al.  Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes , 2016 .

[9]  Wanguo Zheng,et al.  Effect of Mg content on microstructure and corrosion behavior of hot dipped Zn–Al–Mg coatings , 2016 .

[10]  Z. Hamid,et al.  Improvement the Corrosion Resistance for the Galvanized Steel by Adding Sn , 2016 .

[11]  Qimeng Chen,et al.  Corrosion behavior of selective laser melted Ti-6Al-4 V alloy in NaCl solution , 2016 .

[12]  N. Birbilis,et al.  Corrosion of magnesium alloys: the role of alloying , 2015 .

[13]  K. Suganuma,et al.  The role of Zn precipitates and Cl− anions in pitting corrosion of Sn–Zn solder alloys , 2015 .

[14]  G. Scavino,et al.  Influence of the alloying component on the corrosion behaviour of zinc in neutral aerated sodium chloride solution , 2014 .

[15]  Chun-shan Che,et al.  Growth behavior of lanthanum conversion coating on hot-dip galvanized steel , 2014 .

[16]  L. Hamadou,et al.  Corrosion mechanism of Al, Al–Zn and Al–Zn–Sn alloys in 3 wt.% NaCl solution , 2014 .

[17]  Q. Jiang,et al.  Corrosion behavior of arc sprayed Al–Zn–Si–RE coatings on mild steel in 3.5 wt% NaCl solution , 2014 .

[18]  Christofer Leygraf,et al.  Atmospheric corrosion of Galfan coatings on steel in chloride-rich environments , 2013 .

[19]  G. Lothongkum,et al.  Effect of aluminium on the passivation of zinc–aluminium alloys in artificial seawater at 80 °C , 2013 .

[20]  B. Vuillemin,et al.  Protective mechanisms occurring on zinc coated steel cut-edges in immersion conditions , 2011 .

[21]  Chun-shan Che,et al.  Corrosion behavior of lanthanum-based conversion coating modified with citric acid on hot dip galvanized steel in aerated 1 M NaCl solution , 2011 .

[22]  P. Berçot,et al.  Comparison of corrosion behaviour of zinc in NaCl and in NaOH solutions; Part II: Electrochemical analyses , 2010 .

[23]  J. Rauch,et al.  Comparison of corrosion behaviour of zinc in NaCl and in NaOH solutions. Part I: Corrosion layer characterization , 2010 .

[24]  Chun-shan Che,et al.  Morphology and antimony segregation of spangles on batch hot-dip galvanized coatings , 2010 .

[25]  V. S. Raja,et al.  Influence of strontium on electrochemical corrosion behavior of hot-dip galvanized coating , 2009 .

[26]  N. Aung,et al.  Effect of antimony, bismuth and calcium addition on corrosion and electrochemical behaviour of AZ91 magnesium alloy , 2009 .

[27]  F. Rosalbino,et al.  Application of EIS to assess the effect of rare earths small addition on the corrosion behaviour of Zn–5% Al (Galfan) alloy in neutral aerated sodium chloride solution , 2009 .

[28]  F. Pedraza,et al.  Corrosion monitoring of galvanised coatings through electrochemical impedance spectroscopy , 2008 .

[29]  M. R. Toroghinejad,et al.  The Role of Texture and Microstructure in Optimizing the Corrosion Behaviour of Zinc Hot-dip Coated Steel Sheets , 2008 .

[30]  Seungmoo Lee,et al.  Effect of antimony on the corrosion behavior of low-alloy steel for flue gas desulfurization system , 2008 .

[31]  M. R. Toroghinejad,et al.  Relationship between (00.2) and (20.1) texture components and corrosion resistance of hot-dip galvanized zinc coatings , 2008 .

[32]  A. Nishikata,et al.  Evaluation of impedance spectra of zinc and galvanised steel corroding under atmospheric environments , 2008 .

[33]  Xin-Hua Wang,et al.  The behavior of lead during the solidification of Zn 0.1Al 0.1Pb coating on batch hot-dipped steel , 2008 .

[34]  Xin-Hua Wang,et al.  Identification of segregation phase on a batch hot‐dip‐coated Zn/0.1Al/0.2Sb surface , 2007 .

[35]  M. R. Toroghinejad,et al.  On texture, corrosion resistance and morphology of hot-dip galvanized zinc coatings , 2007 .

[36]  H. Shih,et al.  Studies on the initial stages of zinc atmospheric corrosion in the presence of chloride , 2006 .

[37]  M. Arenas,et al.  Use of electrochemical impedance spectroscopy to Study corrosion of galvanised steel in 0·6M NaCl solution , 2006 .

[38]  D. Macdonald.  Reflections on the history of electrochemical impedance spectroscopy , 2006 .

[39]  Florian Mansfeld,et al.  Tafel slopes and corrosion rates obtained in the pre-Tafel region of polarization curves , 2005 .

[40]  E. Pavlidou,et al.  Modification of the growth-direction of the zinc coatings associated with element additions to the galvanizing bath , 2005 .

[41]  A. Nishikata,et al.  Degradation mechanism of galvanized steel in wet–dry cyclic environment containing chloride ions , 2004 .

[42]  Z. Hamid,et al.  Effect of aluminium content on the coating structure and dross formation in the hot‐dip galvanizing process , 2003 .

[43]  T. Itoh,et al.  Defect structure of deformed Fe2Al5 intermetallic compound , 2003 .

[44]  A. Marder,et al.  The metallurgy of zinc-coated steel , 2000 .

[45]  A. R. Di Sarli,et al.  Relationship between texture and corrosion resistance in hot-dip galvanized steel sheets , 1999 .

[46]  T. Perez,et al.  Segregation of alloying elements during the hot-dip coating solidification process , 1999 .

[47]  P. Seré,et al.  Control of the growth of zinc–iron phases in the hot-dip galvanizing process , 1999 .

[48]  M. Zapponi,et al.  Comparative corrosion behaviour of 55Aluminium-Zinc alloy and Zinc hot-dip coatings deposited on low carbon steel substrates , 1998 .

[49]  P. Munroe,et al.  Effects of 0.1 and 0.2 wt.% aluminium addition to zinc on the interdiffusion between zinc and iron at 400°C , 1998 .

[50]  J. Faderl,et al.  Solidification and spangle formation of hot-dip-galvanized zinc coatings , 1998 .

[51]  C. S. Lin,et al.  The effect of steel chemistry on the formation of Fe-Zn intermetallic compounds of galvanneal-coated steel sheets , 1994 .

[52]  S. Chang,et al.  The effect of antimony additions on hot dip galvanized coatings , 1994 .

[53]  F. A. Fasoyinu,et al.  Spangle formation in galvanized sheet steel coatings , 1990 .