A Review on Fault Detection and Process Diagnostics in Industrial Processes

The main roles of fault detection and diagnosis (FDD) for industrial processes are to make an effective indicator which can identify faulty status of a process and then to take a proper action against a future failure or unfavorable accidents. In order to enhance many process performances (e.g., quality and throughput), FDD has attracted great attention from various industrial sectors. Many traditional FDD techniques have been developed for checking the existence of a trend or pattern in the process or whether a certain process variable behaves normally or not. However, they might fail to produce several hidden characteristics of the process or fail to discover the faults in processes due to underlying process dynamics. In this paper, we present current research and developments of FDD approaches for process monitoring as well as a broad literature review of many useful FDD approaches.

[1]  M FrankPaul.  Fault diagnosis in dynamic systems using analytical and knowledge-based redundancya survey and some new results , 1990 .

[2]  Michèle Basseville,et al.  On-board Component Fault Detection and Isolation Using the Statistical Local Approach , 1998, Autom..

[3]  Jin Wang,et al.  Fault Detection Using the k-Nearest Neighbor Rule for Semiconductor Manufacturing Processes , 2007, IEEE Transactions on Semiconductor Manufacturing.

[4]  Kaixiang Peng,et al.  An optimal fault detection approach for piecewise affine systems via diagnostic observers , 2017, Autom..

[5]  Donghua Zhou,et al.  Incipient fault detection with smoothing techniques in statistical process monitoring , 2017 .

[6]  K. Khorasani,et al.  Hybrid fault diagnosis of nonlinear systems using neural parameter estimators , 2014, Neural Networks.

[7]  Jose A. Romagnoli,et al.  An integration mechanism for multivariate knowledge-based fault diagnosis , 2002 .

[8]  Chang Ouk Kim,et al.  Performance of Machine Learning Algorithms for Class-Imbalanced Process Fault Detection Problems , 2016, IEEE Transactions on Semiconductor Manufacturing.

[9]  Flavio Sanson Fogliatto,et al.  Variable selection methods in multivariate statistical process control: A systematic literature review , 2018, Comput. Ind. Eng..

[10]  Inseok Hwang,et al.  A Survey of Fault Detection, Isolation, and Reconfiguration Methods , 2010, IEEE Transactions on Control Systems Technology.

[11]  Rolf Isermann,et al.  Hierarchical motor diagnosis utilizing structural knowledge and a self-learning neuro-fuzzy scheme , 2000, IEEE Trans. Ind. Electron..

[12]  Claus Weihs,et al.  Variable window adaptive Kernel Principal Component Analysis for nonlinear nonstationary process monitoring , 2011, Comput. Ind. Eng..

[13]  Baligh Mnassri,et al.  Reconstruction-based contribution approaches for improved fault diagnosis using principal component analysis , 2015 .

[14]  Chen Jing,et al.  SVM and PCA based fault classification approaches for complicated industrial process , 2015, Neurocomputing.

[15]  Jialin Liu,et al.  Fault diagnosis using contribution plots without smearing effect on non-faulty variables , 2012 .

[16]  Mariem Sahnoun,et al.  Sensor fault detection and isolation filter for polytopic LPV systems: A winding machine application , 2013 .

[17]  Zhiqiang Ge,et al.  Decision fusion systems for fault detection and identification in industrial processes , 2015 .

[18]  Christos Georgakis,et al.  Disturbance detection and isolation by dynamic principal component analysis , 1995 .

[19]  Jian Huang,et al.  Dynamic process fault detection and diagnosis based on dynamic principal component analysis, dynamic independent component analysis and Bayesian inference , 2015 .

[20]  Chang Ouk Kim,et al.  A Convolutional Neural Network for Fault Classification and Diagnosis in Semiconductor Manufacturing Processes , 2017, IEEE Transactions on Semiconductor Manufacturing.

[21]  Vasile Palade,et al.  Model-based fault detection and isolation of a steam generator using neuro-fuzzy networks , 2009, Neurocomputing.

[22]  Karim Salahshoor,et al.  Fault detection and diagnosis of an industrial steam turbine using fusion of SVM (support vector machine) and ANFIS (adaptive neuro-fuzzy inference system) classifiers , 2010 .

[23]  Bo-Suk Yang,et al.  Support vector machine in machine condition monitoring and fault diagnosis , 2007 .

[24]  Theodora Kourti,et al.  Statistical Process Control of Multivariate Processes , 1994 .

[25]  Hyung Jin Chang,et al.  Spatiotemporal Pattern Modeling for Fault Detection and Classification in Semiconductor Manufacturing , 2012, IEEE Transactions on Semiconductor Manufacturing.

[26]  Yang Song,et al.  Parity space-based fault detection for linear discrete time-varying systems with unknown input , 2015, Autom..

[27]  Steven X. Ding,et al.  Improved canonical correlation analysis-based fault detection methods for industrial processes , 2016 .

[28]  Kamal Hadad,et al.  Fault diagnosis and classification based on wavelet transform and neural network , 2011 .

[29]  Seung Jun Lee,et al.  Structural Feature-Based Fault-Detection Approach for the Recipes of Similar Products , 2010, IEEE Transactions on Semiconductor Manufacturing.

[30]  Likun Ren,et al.  Fault Detection via Sparse Representation for Semiconductor Manufacturing Processes , 2014, IEEE Transactions on Semiconductor Manufacturing.

[31]  Bin Jiang,et al.  Multiple incipient sensor faults diagnosis with application to high-speed railway traction devices. , 2017, ISA transactions.

[32]  Kaixiang Peng,et al.  A KPI-based process monitoring and fault detection framework for large-scale processes. , 2017, ISA transactions.

[33]  Hazem Nounou,et al.  Statistical fault detection using PCA-based GLR hypothesis testing , 2013 .

[34]  Ping Zhang,et al.  A comparison study of basic data-driven fault diagnosis and process monitoring methods on the benchmark Tennessee Eastman process , 2012 .

[35]  Steven X. Ding,et al.  A Review on Basic Data-Driven Approaches for Industrial Process Monitoring , 2014, IEEE Transactions on Industrial Electronics.

[36]  Hazem Nounou,et al.  Multiscale PLS-based GLRT for fault detection of chemical processes , 2017 .

[37]  Meik Schlechtingen,et al.  Comparative analysis of neural network and regression based condition monitoring approaches for wind turbine fault detection , 2011 .

[38]  Richard D. Braatz,et al.  Fault detection in industrial processes using canonical variate analysis and dynamic principal component analysis , 2000 .

[39]  Juergen Hahn,et al.  Fault detection and classification in chemical processes based on neural networks with feature extraction. , 2003, ISA transactions.

[40]  Chang Ouk Kim,et al.  Statistical Comparison of Fault Detection Models for Semiconductor Manufacturing Processes , 2015, IEEE Transactions on Semiconductor Manufacturing.

[41]  Tianyou Chai,et al.  Fault diagnosis of continuous annealing processes using a reconstruction-based method , 2012 .

[42]  Tingting Pei,et al.  A Fault Detection Method for Photovoltaic Systems Based on Voltage and Current Observation and Evaluation , 2019, Energies.

[43]  Rolf Isermann,et al.  Process fault detection based on modeling and estimation methods - A survey , 1984, Autom..

[44]  Richard D. Braatz,et al.  Perspectives on process monitoring of industrial systems , 2016, Annu. Rev. Control..

[45]  Yaguo Lei,et al.  A data-driven multiplicative fault diagnosis approach for automation processes. , 2014, ISA transactions.

[46]  P. Konar,et al.  Bearing fault detection of induction motor using wavelet and Support Vector Machines (SVMs) , 2011, Appl. Soft Comput..

[47]  Yuan Li,et al.  Multiway principal polynomial analysis for semiconductor manufacturing process fault detection , 2018, Chemometrics and Intelligent Laboratory Systems.

[48]  Bing Han,et al.  Data-driven based fault prognosis for industrial systems: a concise overview , 2020, IEEE/CAA Journal of Automatica Sinica.

[49]  Raghunathan Rengaswamy,et al.  A review of process fault detection and diagnosis: Part II: Qualitative models and search strategies , 2003, Comput. Chem. Eng..

[50]  Jie Yu,et al.  A new fault diagnosis method of multimode processes using Bayesian inference based Gaussian mixture contribution decomposition , 2013, Eng. Appl. Artif. Intell..

[51]  Chenglin Wen,et al.  Fault Detection Using Random Projections and k-Nearest Neighbor Rule for Semiconductor Manufacturing Processes , 2015, IEEE Transactions on Semiconductor Manufacturing.

[52]  Ying-Tung Hsiao,et al.  A Hybrid Framework for Fault Detection, Classification, and Location—Part II: Implementation and Test Results , 2011, IEEE Transactions on Power Delivery.

[53]  Jianbo Yu,et al.  Fault Detection Using Principal Components-Based Gaussian Mixture Model for Semiconductor Manufacturing Processes , 2011, IEEE Transactions on Semiconductor Manufacturing.

[54]  H. Odendaal,et al.  Actuator fault detection and isolation: An optimised parity space approach , 2014 .

[55]  Jin Hyun Park,et al.  Fault detection and identification of nonlinear processes based on kernel PCA , 2005 .

[56]  Paul M. Frank,et al.  Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy: A survey and some new results , 1990, Autom..

[57]  J. Blue,et al.  Recipe-Independent Indicator for Tool Health Diagnosis and Predictive Maintenance , 2009, IEEE Transactions on Semiconductor Manufacturing.

[58]  Abdelmalek Kouadri,et al.  Fault detection and diagnosis in a cement rotary kiln using PCA with EWMA-based adaptive threshold monitoring scheme , 2017 .

[59]  Muhammad Riaz,et al.  An improved PCA method with application to boiler leak detection. , 2005, ISA transactions.

[60]  Qiang Liu,et al.  Decentralized Fault Diagnosis of Continuous Annealing Processes Based on Multilevel PCA , 2013, IEEE Transactions on Automation Science and Engineering.

[61]  Claude Delpha,et al.  Incipient fault detection and diagnosis based on Kullback-Leibler divergence using principal component analysis: Part II , 2015, Signal Process..

[62]  Donghua Zhou,et al.  Recursive transformed component statistical analysis for incipient fault detection , 2017, Autom..

[63]  Dexian Huang,et al.  Canonical variate analysis-based contributions for fault identification , 2015 .

[64]  Chang Ouk Kim,et al.  A Deep Learning Model for Robust Wafer Fault Monitoring With Sensor Measurement Noise , 2017, IEEE Transactions on Semiconductor Manufacturing.

[65]  Jong-Myon Kim,et al.  Bearing Fault Diagnosis Using an Extended Variable Structure Feedback Linearization Observer , 2018, Sensors.

[66]  L. A. Rusinov,et al.  Fault diagnosis in chemical processes and equipment with feedbacks , 2013 .

[67]  Dexian Huang,et al.  Canonical variate analysis-based monitoring of process correlation structure using causal feature representation , 2015 .

[68]  Andrew Kusiak,et al.  The prediction and diagnosis of wind turbine faults , 2011 .

[69]  Leo H. Chiang,et al.  Fault diagnosis in chemical processes using Fisher discriminant analysis, discriminant partial least squares, and principal component analysis , 2000 .

[70]  Davide Martino Raimondo,et al.  Active fault diagnosis: A multi-parametric approach , 2017, Autom..

[71]  Jicong Fan,et al.  Fault detection and diagnosis of non-linear non-Gaussian dynamic processes using kernel dynamic independent component analysis , 2014, Inf. Sci..

[72]  Richard D. Braatz,et al.  Diagnosis of multiple and unknown faults using the causal map and multivariate statistics , 2015 .

[73]  Xiaogang Deng,et al.  Modified kernel principal component analysis based on local structure analysis and its application to nonlinear process fault diagnosis , 2013 .

[74]  K. Khorasani,et al.  Fault detection and isolation of gas turbine engines using a bank of neural networks , 2015 .

[75]  Fan Wang,et al.  Hidden Markov model-based approach for multimode process monitoring , 2015 .

[76]  Xuefeng Yan,et al.  Parallel PCA–KPCA for nonlinear process monitoring , 2018, Control Engineering Practice.

[77]  Hazem Nounou,et al.  Kernel PLS-based GLRT method for fault detection of chemical processes , 2016 .

[78]  Amparo Alonso-Betanzos,et al.  Fault Prognosis of Mechanical Components Using On-Line Learning Neural Networks , 2010, ICANN.

[79]  In-Beum Lee,et al.  Multiblock PLS-based localized process diagnosis , 2005 .

[80]  Hong Wang,et al.  Data Driven Fault Diagnosis and Fault Tolerant Control: Some Advances and Possible New Directions: Data Driven Fault Diagnosis and Fault Tolerant Control: Some Advances and Possible New Directions , 2009 .

[81]  Haitao Zhao,et al.  Dynamic graph embedding for fault detection , 2018, Comput. Chem. Eng..

[82]  Xi Zhang,et al.  Effective fault detection & isolation using bond graph-based Domain decomposition , 2009, 2009 American Control Conference.

[83]  Mohamed Azlan Hussain,et al.  Fault diagnosis and classification framework using multi-scale classification based on kernel Fisher discriminant analysis for chemical process system , 2017, Appl. Soft Comput..

[84]  Duane S. Boning,et al.  Simultaneous Fault Detection and Classification for Semiconductor Manufacturing Tools , 2003 .

[85]  Raghunathan Rengaswamy,et al.  A review of process fault detection and diagnosis: Part I: Quantitative model-based methods , 2003, Comput. Chem. Eng..

[86]  S. Joe Qin,et al.  Data-driven root cause diagnosis of faults in process industries , 2016, Chemometrics and Intelligent Laboratory Systems.

[87]  Tiago J. Rato,et al.  Fault detection in the Tennessee Eastman benchmark process using dynamic principal components analysis based on decorrelated residuals (DPCA-DR) , 2013 .

[88]  Yuan Li,et al.  Fault Detection Strategy Based on Weighted Distance of $k$ Nearest Neighbors for Semiconductor Manufacturing Processes , 2019, IEEE Transactions on Semiconductor Manufacturing.

[89]  Gang Li,et al.  Reconstruction based fault prognosis for continuous processes , 2010 .

[90]  Rajiv Tiwari,et al.  Optimum multi-fault classification of gears with integration of evolutionary and SVM algorithms , 2014 .

[91]  Faisal Khan,et al.  Dynamic process fault detection and diagnosis based on a combined approach of hidden Markov and Bayesian network model , 2019, Chemical Engineering Science.

[92]  Weihua Li,et al.  Recursive PCA for adaptive process monitoring , 1999 .

[93]  Lin Zhang,et al.  Two methods of selecting Gaussian kernel parameters for one-class SVM and their application to fault detection , 2014, Knowl. Based Syst..

[94]  Emanuel Bernardi,et al.  Observer-based fault detection and diagnosis strategy for industrial processes , 2020, J. Frankl. Inst..

[95]  Chunhui Zhao,et al.  A sparse dissimilarity analysis algorithm for incipient fault isolation with no priori fault information , 2017 .

[96]  Fei He,et al.  Nonlinear fault detection of batch processes based on functional kernel locality preserving projections , 2018, Chemometrics and Intelligent Laboratory Systems.

[97]  Laurent Mevel,et al.  Fault detection, isolation and quantification from Gaussian residuals with application to structural damage diagnosis , 2016, Annu. Rev. Control..

[98]  Ye Zhao,et al.  Graph-Based Semi-supervised Learning for Fault Detection and Classification in Solar Photovoltaic Arrays , 2015, IEEE Transactions on Power Electronics.

[99]  Raghunathan Rengaswamy,et al.  Kalman-based strategies for Fault Detection and Identification (FDI): Extensions and critical evaluation for a buffer tank system , 2011, Comput. Chem. Eng..

[100]  Orestes Llanes-Santiago,et al.  Optimizing kernel methods to reduce dimensionality in fault diagnosis of industrial systems , 2015, Comput. Ind. Eng..

[101]  Cristobal Ruiz-Carcel,et al.  Statistical process monitoring of a multiphase flow facility , 2015 .

[102]  Bart De Schutter,et al.  Combining knowledge and historical data for system-level fault diagnosis of HVAC systems , 2017, Eng. Appl. Artif. Intell..

[103]  Swagatam Das,et al.  Multi-sensor data fusion using support vector machine for motor fault detection , 2012, Inf. Sci..

[104]  Yuan Li,et al.  Diffusion maps based k-nearest-neighbor rule technique for semiconductor manufacturing process fault detection , 2014 .

[105]  Zhiqiang Ge,et al.  Semi-supervised Fisher discriminant analysis model for fault classification in industrial processes , 2014 .

[106]  Hazem Nounou,et al.  Kernel PCA-based GLRT for nonlinear fault detection of chemical processes , 2016 .

[107]  Chi Ma,et al.  Fault diagnosis of nonlinear processes using multiscale KPCA and multiscale KPLS , 2011 .

[108]  G Verdier,et al.  Adaptive Mahalanobis Distance and $k$ -Nearest Neighbor Rule for Fault Detection in Semiconductor Manufacturing , 2011, IEEE Transactions on Semiconductor Manufacturing.

[109]  Chang Ouk Kim,et al.  An Incremental Clustering-Based Fault Detection Algorithm for Class-Imbalanced Process Data , 2015, IEEE Transactions on Semiconductor Manufacturing.

[110]  Satish C. Sharma,et al.  Fault diagnosis of ball bearings using machine learning methods , 2011, Expert Syst. Appl..

[111]  Jie Yu.  A nonlinear kernel Gaussian mixture model based inferential monitoring approach for fault detection and diagnosis of chemical processes , 2012 .

[112]  Jin Wang,et al.  Large-Scale Semiconductor Process Fault Detection Using a Fast Pattern Recognition-Based Method , 2010, IEEE Transactions on Semiconductor Manufacturing.

[113]  Richard D. Braatz,et al.  A combined canonical variate analysis and Fisher discriminant analysis (CVA-FDA) approach for fault diagnosis , 2015, Comput. Chem. Eng..

[114]  Uwe Kruger,et al.  Improved principal component monitoring using the local approach , 2007, Autom..

[115]  Xian Du,et al.  Fault detection using bispectral features and one-class classifiers , 2019, Journal of Process Control.

[116]  Udo Schubert,et al.  Unified model-based fault diagnosis for three industrial application studies , 2011 .

[117]  Andrew Kusiak,et al.  Analyzing bearing faults in wind turbines: A data-mining approach , 2012 .

[118]  Yang Wang,et al.  Joint-individual monitoring of large-scale chemical processes with multiple interconnected operation units incorporating multiset CCA , 2017 .

[119]  Xiaobo Chen,et al.  Multivariate industrial process monitoring based on the integration method of canonical variate analysis and independent component analysis , 2012 .

[120]  Jiang Bin,et al.  Adaptive PCA based fault diagnosis scheme in imperial smelting process , 2013, 2013 10th IEEE International Conference on Control and Automation (ICCA).

[121]  Chudong Tong,et al.  Double-layer ensemble monitoring of non-gaussian processes using modified independent component analysis. , 2017, ISA transactions.

[122]  Ying-Tung Hsiao,et al.  A Hybrid Framework for Fault Detection, Classification, and Location—Part I: Concept, Structure, and Methodology , 2011, IEEE Transactions on Power Delivery.

[123]  Jie Zhang,et al.  Fault detection in dynamic processes using a simplified monitoring-specific CVA state space modelling approach , 2012, Comput. Chem. Eng..

[124]  Yingwei Zhang,et al.  Quality-related fault detection approach based on dynamic kernel partial least squares , 2016 .

[125]  Jun-Geol Baek,et al.  Spline regression based feature extraction for semiconductor process fault detection using support vector machine , 2011, Expert Syst. Appl..

[126]  Biao Huang,et al.  Process monitoring using kernel density estimation and Bayesian networking with an industrial case study. , 2015, ISA transactions.

[127]  Raghunathan Rengaswamy,et al.  A review of process fault detection and diagnosis: Part III: Process history based methods , 2003, Comput. Chem. Eng..

[128]  Ian Postlethwaite,et al.  Survey and application of sensor fault detection and isolation schemes , 2011 .

[129]  Si-Zhao Joe Qin,et al.  Survey on data-driven industrial process monitoring and diagnosis , 2012, Annu. Rev. Control..

[130]  Rolf Isermann,et al.  Supervision, fault-detection and fault-diagnosis methods — An introduction , 1997 .

[131]  Brian A. Weiss,et al.  A review of diagnostic and prognostic capabilities and best practices for manufacturing , 2019, J. Intell. Manuf..

[132]  Chuanjiang Li,et al.  Subspace aided data-driven design of robust fault detection and isolation systems , 2011, Autom..

[133]  Vikram Garaniya,et al.  Nonlinear Gaussian Belief Network based fault diagnosis for industrial processes , 2015 .

[134]  George J. Vachtsevanos,et al.  A particle-filtering approach for on-line fault diagnosis and failure prognosis , 2009 .

[135]  Hyun Joon Shin,et al.  One-class support vector machines - an application in machine fault detection and classification , 2005, Comput. Ind. Eng..

[136]  Mohd Azlan Hussain,et al.  Fault diagnosis of Tennessee Eastman process with multi- scale PCA and ANFIS , 2013 .

[137]  S. Joe Qin,et al.  Analysis and generalization of fault diagnosis methods for process monitoring , 2011 .

[138]  Didier Maquin,et al.  Fault detection, isolation and estimation for Takagi-Sugeno nonlinear systems , 2014, J. Frankl. Inst..