CFD analysis of two‐phase turbulent flow in internal airlift reactors

The hydrodynamic performance of three internal airlift reactor configurations was studied by the Eulerian–Eulerian k–e model for a two-phase turbulent flow. Comparative evaluation of different drag and lift force coefficient models in terms of liquid velocity in the riser and downcomer and gas holdup in the riser was highlighted. Drag correlations as a function of Eotvos number performed better results in comparison to the drag expressions related to Reynolds number. However, the drag correlation as a function of both Reynolds and Eotvos numbers fitted well with experimental results for the riser gas holdup and downcomer liquid velocity in configurations I and II. Positive lift coefficients increase the liquid velocity and decrease the riser gas holdup, while opposite results were obtained for negative values. By studying the effects of bubble size and their shape, the smaller bubbles provide a lower liquid velocity and a gas holdup. The effects of bubble-induced turbulence and other non-drag closure models such as turbulent dispersion and added mass forces were analysed. The gas velocity and gas holdup distributions, liquid velocity in the riser and downcomer, vectors of velocity magnitude and streamlines for liquid phase, the dynamics of gas holdup distribution and turbulent viscosity at different superficial gas velocities for different reactor configurations were computed. The effects of various geometrical parameters such as the draft tube clearance and the ratio of the riser to the downcomer cross-sectional area on liquid velocities in the riser and the downcomer, the gas velocity and the gas holdup were explored. © 2011 Canadian Society for Chemical Engineering

[1]  D. Drew.  Mathematical Modeling of Two-Phase Flow , 1983 .

[2]  Isao Kataoka,et al.  Turbulence structure of air-water bubbly flow—I. measuring techniques , 1975 .

[3]  Maria Gavrilescu,et al.  Mixing studies in external-loop airlift reactors , 1997 .

[4]  Donald A. Drew,et al.  The virtual mass and lift force on a sphere in rotating and straining inviscid flow , 1987 .

[5]  Jam Hans Kuipers,et al.  Dynamic simulation of gas-liquid two-phase flow: effect of column aspect ratio on the flow structure. , 1997 .

[6]  Robert McGraw,et al.  Description of Aerosol Dynamics by the Quadrature Method of Moments , 1997 .

[7]  Campbell W. Robinson,et al.  Application of airlift gas-liquid-solid reactors in biotechnology , 1992 .

[8]  I. Kataoka,et al.  Basic equations of turbulence in gas-liquid two-phase flow , 1989 .

[9]  Y. Sato,et al.  Liquid velocity distribution in two-phase bubble flow , 1975 .

[10]  R. F. Mudde,et al.  2D and 3D simulations of an internal airlift loop reactor on the basis of a two-fluid model , 2001 .

[11]  Jam Hans Kuipers,et al.  Numerical simulation of the dynamic flow behavior in a bubble column : A study of closures for turbulence and interface forces , 2006 .

[12]  V. Ranade.  Modelling of turbulent flow in a bubble column reactor , 1997 .

[13]  Tron Solberg,et al.  Large eddy simulation of the Gas-Liquid flow in a square cross-sectioned bubble column , 2001 .

[14]  A. Cockx,et al.  Effect of bubble deformation on stability and mixing in bubble columns , 2002 .

[15]  Miguel A. Galán,et al.  Influence of the lift force closures on the numerical simulation of bubble plumes in a rectangular bubble column , 2009 .

[16]  Robert F. Mudde,et al.  Simulation of a slurry airlift using a two-fluid model , 2001 .

[17]  R. Lahey,et al.  Phase distribution in complex geometry conduits , 1993 .

[18]  T. Z. Harmathy,et al.  Velocity of large drops and bubbles in media of infinite or restricted extent , 1960 .

[19]  D. Drew,et al.  Application of general constitutive principles to the derivation of multidimensional two-phase flow equations , 1979 .

[20]  H. Wagner,et al.  Hydrodynamic simulations of laboratory scale bubble columns fundamental studies of the Eulerian–Eulerian modelling approach , 1999 .

[21]  Milorad P. Dudukovic,et al.  Dynamic simulation of bubbly flow in bubble columns , 1999 .

[22]  Robert F. Mudde,et al.  Two- and three-dimensional simulations of a bubble plume using a two-fluid model , 1999 .

[23]  Pekka Oinas,et al.  Hydrodynamics and mass transfer in an airlift reactor , 1999 .

[24]  W. Al-Masry,et al.  The role of gas disengagement and surface active agents on hydrodynamic and mass transfer characteristics of airlift reactors , 1997 .

[25]  Carlos A. Dorao,et al.  Time–space-property least squares spectral method for population balance problems , 2007 .

[26]  Rajamani Krishna,et al.  Using CFD to describe the hydrodynamics of internal air-lift reactors , 2008 .

[27]  Farhad Ein-Mozaffari,et al.  Characteristics of Local Flow Dynamics and Macro-Mixing in Airlift Column Reactors for Reliable Design and Scale-Up , 2009 .

[28]  Jam Hans Kuipers,et al.  DNS of gas bubbles behaviour using an improved 3D front tracking model-Drag force on isolated bubbles and comparison with experiments , 2010 .

[29]  Carlos A. Dorao,et al.  Modeling of Bubble Column Reactors: Progress and Limitations , 2005 .

[30]  H. F. Svendsen,et al.  Local flow structures in internal loop and bubble column reactors , 1992 .

[31]  A. K. Agrawal,et al.  Shape of liquid drops moving in liquid media , 1966 .

[32]  J. Markoš,et al.  Gas-liquid simulation of an airlift bubble column reactor , 2004 .

[33]  Carlos A. Dorao,et al.  hp-adaptive least squares spectral element method for population balance equations , 2008 .

[34]  Jam Hans Kuipers,et al.  A three-demensional CFD model for gas-liquid bubble columns , 1999 .

[35]  H. Jakobsen,et al.  A Combined Multifluid-Population Balance Model for Vertical Gas−Liquid Bubble-Driven Flows Considering Bubble Column Operating Conditions , 2011 .

[36]  Jyeshtharaj B. Joshi,et al.  CFD simulation of bubble column reactors: importance of drag force formulation , 1999 .

[37]  Yong Jin,et al.  Experimental Study and CFD Simulation of Hydrodynamic Behaviours in an External Loop Airlift Slurry Reactor , 2008 .

[38]  Michio Sadatomi,et al.  Momentum and heat transfer in two-phase bubble flow—I. Theory , 1981 .

[39]  Akio Tomiyama,et al.  Multi-fluid simulation of turbulent bubbly pipe flows , 2009 .

[40]  Alain Liné,et al.  Modeling hydrodynamics of gas–liquid airlift reactor , 2007 .

[41]  H. Jakobsen,et al.  Least-squares spectral method for solving advective population balance problems , 2007 .

[42]  L. Nikolov,et al.  Free rising spheres do not obey newton's law for free settling , 1992 .

[43]  R. Lahey,et al.  Phase distribution in bubbly two-phase flow in vertical ducts , 1994 .

[44]  Carlos Alberto Dorao,et al.  A least squares method for the solution of population balance problems , 2006, Comput. Chem. Eng..

[45]  Hanns Hofmann,et al.  Investigations and modelling of bubble columns , 1992 .

[46]  H. Delmas,et al.  Contribution to the study of hydrodynamics and gas–liquid mass transfer in a two- and three-phase split-rectangular airlift reactor , 2005 .

[47]  G. Eigenberger,et al.  Simulation of Buoyancy Driven Bubbly Flow: Established Simplifications and Open Questions (Journal Review) , 2004 .

[48]  Hallvard F. Svendsen,et al.  Modeling of Vertical Bubble-Driven Flows , 1997 .

[49]  Hidesada Tamai,et al.  Transverse migration of single bubbles in simple shear flows , 2002 .

[50]  Yusuf Chisti,et al.  Prediction of liquid circulation velocity in airlift reactors with biological media , 2007 .

[51]  A. D. Gosman,et al.  Multidimensional modeling of turbulent two‐phase flows in stirred vessels , 1992 .

[52]  B. Launder,et al.  The numerical computation of turbulent flows , 1990 .

[53]  Richard T. Lahey,et al.  The analysis of phase separation and phase distribution phenomena using two-fluid models , 1990 .

[54]  Vivek V. Ranade,et al.  Dynamics of gas-liquid flow in a rectangular bubble column: Experiments and single/multi-group CFD simulations , 2002 .

[55]  S. Becker,et al.  Modelling and simulation of the dynamic flow behaviour in a bubble column , 2001 .

[56]  Brian L. Smith,et al.  CFD simulation of large-scale bubble plumes : Comparisons against experiments , 2007 .

[57]  Said Elghobashi,et al.  A two‐equation turbulence model for two‐phase flows , 1983 .

[58]  Vivek V. Ranade,et al.  Mixing in bubble column reactors: Role of unsteady flow structures , 2008 .

[59]  G. Tryggvason,et al.  Effect of bubble deformation on the properties of bubbly flows , 2003, Journal of Fluid Mechanics.

[60]  M. Frenklach.  Method of moments with interpolative closure , 2002 .

[61]  Daniele Marchisio,et al.  Solution of population balance equations using the direct quadrature method of moments , 2005 .

[62]  H.E.A. van den Akker,et al.  Sensitivity study on interfacial closure laws in two‐fluid bubbly flow simulations , 2003 .

[63]  Gian Piero Celata,et al.  Terminal velocity of single bubbles in surface tension force dominant regime , 2002 .

[64]  Ridwan S. Oey,et al.  Numerical Simulations of an Oscillating Internal‐loop Airlift Reactor , 2008 .

[65]  W. VanderHeyden,et al.  Three-dimensional simulation of a three-phase draft-tube bubble column , 2000 .

[66]  Mandar Tabib,et al.  CFD simulation of bubble column—An analysis of interphase forces and turbulence models , 2008 .

[67]  A. Deshpande,et al.  Experimental and numerical investigation of liquid circulation induced by a bubble plume in a baffled tank , 2007 .

[68]  R. Lahey,et al.  Turbulent bubbly two-phase flow data in a triangular duct , 1994 .

[69]  Yassin A. Hassan,et al.  A two-equation turbulence model of turbulent bubbly flows , 2001 .

[70]  Gerhart Eigenberger,et al.  Gas—liquid flow in bubble columns and loop reactors: Part II. Comparison of detailed experiments and flow simulations , 1994 .