Simulation study on cooling effect of two-phase liquid-immersion cabinet in data center

[1]  Sam S. Yoon,et al.  Pool boiling enhancement by nanotextured surface of hierarchically structured electroplated Ni nanocones , 2021, International Journal of Heat and Mass Transfer.

[2]  Xingping Li,et al.  A new cooling strategy for edge computing servers using compact looped heat pipe , 2021 .

[3]  S. Ookawara,et al.  Flow boiling in a four-compartment heat sink for high-heat flux cooling: A parametric study , 2021 .

[4]  F. Duan,et al.  System-level experimental investigations of the direct immersion cooling data center units with thermodynamic and thermoeconomic assessments , 2021 .

[5]  Amir Ali.  Thermal performance and stress analysis of heat spreaders for immersion cooling applications , 2020 .

[6]  F. Duan,et al.  Two-phase liquid-immersion data center cooling system: Experimental performance and thermoeconomic analysis , 2020 .

[7]  Chin-Chi Cheng,et al.  Design of a single-phase immersion cooling system through experimental and numerical analysis , 2020 .

[8]  Jinjia Wei,et al.  Critical heat flux prediction model for flow boiling on micro-pin-finned surfaces , 2020, International Journal of Heat and Mass Transfer.

[9]  B. R. Bapu,et al.  Two phase cooling with nano-fluid for highly dense electronic systems-on-chip – A pilot study , 2020 .

[10]  Dashu Li,et al.  Nucleate boiling heat transfer and critical heat flux (CHF) from micro-pit surfaces , 2020 .

[11]  Seok-min Kim,et al.  Analysis of the enhancing mechanism in pool boiling heat transfer through wetting speed for rough aluminum surfaces with FC-72 , 2020 .

[12]  L. Gong,et al.  A novel thermal management scheme for 3D-IC chips with multi-cores and high power density , 2020 .

[13]  Bo Yu,et al.  Experimental and numerical study on bubble dynamics and heat transfer during nucleate boiling of FC-72 , 2019, International Journal of Heat and Mass Transfer.

[14]  Wahid Maref,et al.  Performance optimization of cascaded and non-cascaded thermoelectric devices for cooling computer chips , 2019, Energy Conversion and Management.

[15]  Xiaobing Luo,et al.  A Bi-Layer compact thermal model for uniform chip temperature control with non-uniform heat sources by genetic-algorithm optimized microchannel cooling , 2019, International Journal of Thermal Sciences.

[16]  Saman K. Halgamuge,et al.  A Review on efficient thermal management of air- and liquid-cooled data centers: From chip to the cooling system , 2017 .

[17]  Henry Coles,et al.  Immersion Cooling of Electronics in DoD Installations , 2016 .

[18]  R. Johnson,et al.  Experimental Investigation of a Direct Liquid Immersion Cooled Prototype for High Performance Electronic Systems , 2015, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[19]  Mohamed A. Habib,et al.  Numerical predictions of flow boiling characteristics: Current status, model setup and CFD modeling for different non-uniform heating profiles , 2015 .

[20]  Jonathan Summers,et al.  Case study of a data centre using enclosed, immersed, direct liquid-cooled servers , 2014, 2014 Semiconductor Thermal Measurement and Management Symposium (SEMI-THERM).

[21]  M. Guingo,et al.  Validation of the Large Interface Method of NEPTUNE_CFD 1.0.8 for Pressurized Thermal Shock (PTS) applications , 2012 .

[22]  Jinjia Wei,et al.  Subcooled flow boiling heat transfer of FC-72 from silicon chips fabricated with micro-pin-fins , 2009 .

[23]  Wenbin Zhou,et al.  Pool boiling performance and bubble dynamics on graphene oxide nanocoating surface , 2020 .