Microstructure, mechanical properties, and milling performance of arc-PVD AlTiN-Cu and AlTiN/AlTiN-Cu coatings

[1]  Yudong Fu,et al.  Wear resistance of TC4 by deformation accelerated plasma nitriding at 400 °C , 2016 .

[2]  Chengyong Wang,et al.  Wear and breakage of TiAlN- and TiSiN-coated carbide tools during high-speed milling of hardened steel , 2015 .

[3]  Guoqiang Lin,et al.  Synthesis of Cu doped TiN composite films deposited by pulsed bias arc ion plating , 2014 .

[4]  S. H. Tomadi,et al.  Failure mode analysis of carbide cutting tools used for machining titanium alloy , 2013 .

[5]  Qing-Long Zhao,et al.  Effects of Cu Addition on Microstructure and Adhesion Properties of Ti-Al-N Nanocomposite Films Deposited by Magnetron Sputtering , 2013 .

[6]  Lei Wang,et al.  Effect of nitrogen partial pressure on Al–Ti–N films deposited by arc ion plating , 2011 .

[7]  Yanfei Zhao,et al.  Deposition, structure and hardness of Ti–Cu–N hard films prepared by pulse biased arc ion plating , 2011 .

[8]  S. Veldhuis,et al.  Wear behavior of adaptive nano-multilayered AlTiN/MexN PVD coatings during machining of aerospace alloys , 2010 .

[9]  D. Cahill,et al.  Multi-functional nano-multilayered AlTiN/Cu PVD coating for machining of Inconel 718 superalloy , 2010 .

[10]  P. N. Gibson,et al.  Effect of Cu Content on the Structure, and Performance of Substoichiometric Cr–N Coatings , 2010 .

[11]  S. Veldhuis,et al.  Microscopic Observations on the Origin of Defects During Machining of Direct Aged (DA) Inconel 718 Superalloy , 2010 .

[12]  S. Veldhuis,et al.  Design and performance of AlTiN and TiAlCrN PVD coatings for machining of hard to cut materials , 2009 .

[13]  Stephen C. Veldhuis,et al.  Machining performance of TiN coatings incorporating indium as a solid lubricant , 2009 .

[14]  M. Leu,et al.  Microstructure and physical properties of arc ion plated TiAlN/Cu thin film , 2006 .

[15]  Lars Hultman,et al.  Microstructural design of hard coatings , 2006 .

[16]  E. Ezugwu.  Key improvements in the machining of difficult-to-cut aerospace superalloys , 2005 .

[17]  J. Gachon,et al.  On the mechanism of heterogeneous reaction and phase formation in Ti/Al multilayer nanofilms , 2005 .

[18]  S. G. Harris,et al.  Reducing the macroparticle content of cathodic arc evaporated TiN coatings , 2003 .

[19]  H. Takikawa,et al.  Cathode spot motion in vacuum arc of zinc cathode under oxygen gas flow , 2001 .

[20]  H. Takikawa,et al.  Preparation of metal nitride and oxide thin films using shielded reactive vacuum arc deposition , 2000 .