Development of superconducting power devices in Europe

Abstract Europe celebrated last year (2008) the 100-year anniversary of the first liquefaction of helium by H. Kammerling Onnes in Leiden. It led to the discovery of superconductivity in 1911. Europe is still active in the development of superconducting (SC) devices. The discovery of high critical temperature materials in 1986, again in Europe, has opened a lot of opportunities for SC devices by broking the 4 K cryogenic bottleneck. Electric networks experience deep changes due to the emergence of dispersed generation (renewable among other) and to the advances in ICT (Information Communication Technologies). The networks of the future will be “smart grids”. Superconductivity will offer “smart” devices for these grids like FCL (Fault Current Limiter) or VLI (Very Low Inductance) cable and would certainly play an important part. Superconductivity also will participate to the required sustainable development by lowering the losses and enhancing the mass specific powers. Different SC projects in Europe will be presented (Cable, FCL, SMES, Flywheel and Electrical Machine) but the description is not exhaustive. Nexans has commercialized the first two FCLs without public funds in the European grid (UK and Germany). The Amsterdam HTS cable is an exciting challenge in term of losses for long SC cables. European companies (Nexans, Air Liquide, Siemens, Converteam, …) are also very active for projects outside Europe (LIPA, DOE FCL, …).

[1]  J. F. Maguire,et al.  Status of high temperature superconductor cable and fault current limiter projects at American Superconductor , 2009 .

[2]  C. Luongo.  Superconducting storage systems: an overview , 1996 .

[3]  L. Martini,et al.  Design and Development of 15 MVA Class Fault Current Limiter for Distribution Systems , 2009, IEEE Transactions on Applied Superconductivity.

[4]  Mathias Noe,et al.  High-temperature superconductor fault current limiters: concepts, applications, and development status , 2007 .

[5]  Alexander Otto,et al.  Progress in high temperature superconductor coated conductors and their applications , 2008 .

[6]  Yutaka Yamada,et al.  Present status and future prospect of coated conductor development and its application in Japan , 2008 .

[7]  Jacob Østergaard,et al.  First operation experiences from a 30 kV, 104 MVA HTS power cable installed in a utility substation , 2002 .

[8]  Y. Laumond,et al.  Experiments with a high voltage (40 kV) superconducting fault current limiter , 1996 .

[9]  C.S. Weber,et al.  Recovery Under Load Performance of 2nd Generation HTS Superconducting Fault Current Limiter for Electric Power Transmission Lines , 2009, IEEE Transactions on Applied Superconductivity.

[10]  A. Allais,et al.  Design of a 30 m long 1 kA 10 kV YBCO cable , 2006 .

[11]  D. E. Fowler,et al.  A superconducting fault‐current limiter , 1978 .

[12]  Wolfgang Nick,et al.  Basic concepts, status, opportunities, and challenges of electrical machines utilizing high-temperature superconducting (HTS) windings , 2008 .

[13]  I. P. Radchenko,et al.  30 m HTS Power Cable Development and Witness Sample Test , 2009, IEEE Transactions on Applied Superconductivity.

[14]  E. B. Forsyth.  The 60 HZ Performance of Superconducting Power Transmission Cables Rated for 333 MVA Per Phase , 1984, IEEE Power Engineering Review.

[15]  Pascal Tixador,et al.  Superconducting fault current limiter with bulk materials , 2002 .

[16]  M. Noe,et al.  CURL 10: development and field-test of a 10 kV/10 MVA resistive current limiter based on bulk MCP-BSCCO 2212 , 2005, IEEE Transactions on Applied Superconductivity.

[17]  Yasuhiro Iijima,et al.  Development of 6.6 kV/600 A superconducting fault current limiter using coated conductors , 2009 .

[18]  Wolfgang Nick,et al.  380 kW synchronous machine with HTS rotor windings--development at Siemens and first test results , 2002 .

[19]  Wolfgang Schmidt,et al.  Development of Resistive Fault Current Limiters Based on YBCO Coated Conductors , 2009, IEEE Transactions on Applied Superconductivity.

[20]  Jie Yuan,et al.  Development and Demonstration of a Fault Current Limiting HTS Cable to be Installed in the Con Edison Grid , 2009, IEEE Transactions on Applied Superconductivity.

[21]  Bok-Yeol Seok,et al.  Development of a 13.2 kV/630 A (8.3 MVA) High Temperature Superconducting Fault Current Limiter , 2008, IEEE Transactions on Applied Superconductivity.

[22]  M. Noe,et al.  Technical and economical benefits of superconducting fault current limiters in power systems , 1999, IEEE Transactions on Applied Superconductivity.

[23]  K. Miyaike,et al.  Recent progress on 70 MW class superconducting generators , 1999, IEEE Transactions on Applied Superconductivity.