Design and characterization of electrospun polyamide nanofiber media for air filtration applications

Electrospun polyamide 6 (PA 6) and polyamide 6/6 (PA 6/6) nanofibers were produced in order to investigate their experimental characteristics with the goal of obtaining filtration relevant fiber media. The experimental design model of each PA nanofibers contained the following variables: polymer concentration, ratio of solvents, nanofiber media collection time, tip-to-collector distance, and the deposition voltage. The average diameter of the fibers, their morphology, basis weight, thickness, and resulting media solidity were investigated. Effects of each variable on the essential characteristics of PA 6/6 and PA 6 nanofiber media were studied. The comparative analysis of the obtained PA 6/6 and PA 6 nanofiber characteristics revealed that PA 6/6 had higher potential to be used in filtration applications. Based on the experimental results, the graphical representation--response surfaces--for obtaining nanofiber media with the desirable fiber diameter and basis weight characteristics were derived. Based on the modelling results the nanofiber filter media (mats) were fabricated. Filtration results revealed that nanofiber filter media electrospun from PA6/6 8% (w/vol) solutions with the smallest fiber diameters (62-66 nm) had the highest filtration efficiency (PA6/6_30 = 84.9-90.9%) and the highest quality factor (PA6/6_10 = 0.0486-0.0749 Pa-1).

[1]  Hak Yong Kim,et al.  Effect of successive electrospinning and the strength of hydrogen bond on the morphology of electrospun nylon-6 nanofibers , 2010 .

[2]  Cheol-Sang Kim,et al.  Characterization and antibacterial properties of Ag NPs loaded nylon-6 nanocomposite prepared by one-step electrospinning process , 2012 .

[3]  George K Stylios,et al.  Effect of Experimental Parameters on the Morphology of Electrospun Nylon 6 fibres , 2010 .

[4]  K. D. Clerck,et al.  Electrospun polyamide 4.6 nanofibrous nonwovens: parameter study and characterization , 2012 .

[5]  W. Marsden.  I and J , 2012 .

[6]  L. Guerrini,et al.  Electrospinning and characterization of polyamide 66 nanofibers with different molecular weights , 2009 .

[7]  S. Kundu,et al.  Electrospinning: a fascinating fiber fabrication technique. , 2010, Biotechnology advances.

[8]  Jing Wang,et al.  Figure of Merit of Composite Filters with Micrometer and Nanometer Fibers , 2008 .

[9]  A. Harlin,et al.  Parameter study of electrospinning of polyamide-6 , 2008 .

[10]  H. Kim,et al.  Electrospun nylon-6 spider-net like nanofiber mat containing TiO(2) nanoparticles: a multifunctional nanocomposite textile material. , 2011, Journal of hazardous materials.

[11]  Kunigal N. Shivakumar,et al.  Electrospinning of Nylon-66 Polymer Nanofabrics , 2008 .

[12]  W. W. Leung,et al.  Effect of face velocity, nanofiber packing density and thickness on filtration performance of filters with nanofibers coated on a substrate , 2010 .

[13]  M. L. Laucks,et al.  Aerosol Technology Properties, Behavior, and Measurement of Airborne Particles , 2000 .

[14]  Greg Ward.  Nanofibres: media at the nanoscale , 2005 .

[15]  Leon Gradoń,et al.  Application of nanofibers to improve the filtration efficiency of the most penetrating aerosol particles in fibrous filters , 2006 .

[16]  Xin Wang,et al.  Needleless electrospinning of uniform nanofibers using spiral coil spinnerets , 2012 .

[17]  Francisco José Alguacil,et al.  The measurement of charging efficiencies and losses of aerosol nanoparticles in a corona charger , 2006 .

[18]  A. Mikos,et al.  Electrospinning of polymeric nanofibers for tissue engineering applications: a review. , 2006, Tissue engineering.

[19]  Larry C. Wadsworth,et al.  The Handbook of Nonwoven Filter Media , 2007 .

[20]  Wolfgang M. Sigmund,et al.  Improvement in nanofiber filtration by multiple thin layers of nanofiber mats , 2010 .

[21]  Faheem A. Sheikh,et al.  Spider-net within the N6, PVA and PU electrospun nanofiber mats using salt addition: Novel strategy in the electrospinning process , 2009 .

[22]  Xuejun Wen,et al.  Effect of electrospinning parameters on the nanofiber diameter and length. , 2009, Materials science & engineering. C, Materials for biological applications.

[23]  M. Maly,et al.  Production Nozzle-Less Electrospinning Nanofiber Technology , 2009 .

[24]  Kikuo Okuyama,et al.  Morphology optimization of polymer nanofiber for applications in aerosol particle filtration , 2010 .

[25]  Mohan Edirisinghe,et al.  Forming of polymer nanofibers by a pressurised gyration process. , 2013, Macromolecular rapid communications.

[26]  Jing Wang,et al.  Investigation of the figure of merit for filters with a single nanofiber layer on a substrate , 2008 .

[27]  Wallace Woon-Fong Leung,et al.  Filtration of nano-aerosol using nanofiber filter under low Peclet number and transitional flow regime , 2011 .

[28]  Pirjo Heikkilä,et al.  Electrospinning of Polyamides With Different Chain Compositions for Filtration Application , 2008 .

[29]  Jooyoun Kim,et al.  Design of ultra-fine nonwovens via electrospinning of Nylon 6: Spinning parameters and filtration efficiency , 2009 .