Framework for incorporating human factors into production and logistics systems

Many companies, despite there being opportunities for automation in production and logistics (P&L) systems, still rely on human workers due to their cognitive and motor skills. Taking Human Factor (HF) aspects into consideration when making P&L system design and management decisions is therefore important, an ignorance of HF potentially resulting in operator fatigue, discomfort, subsequent injuries and negative consequences for operator performance and the P&L system. A review of the literature shows that the majority of studies that take HF into consideration focus either on designing the workplace or on operation planning activities. There is also still a gap in the literature. Little has been published on P&L systems that incorporate HF and that combine different levels of short-term operational policy decisions (e.g. job allocation) and long-term system characteristic decisions (e.g. layout design). Current state-of-the-art frameworks that support the design and management of P&L systems and that take HF into consideration rarely consider different decision levels. This study proposes a new framework that incorporates HF into P&L systems by combining different levels of decisions to improve performance, quality, and well-being.

[1]  Fabio Sgarbossa,et al.  Decision support model for implementing assistive technologies in assembly activities: a case study , 2020, Int. J. Prod. Res..

[2]  Serena Finco,et al.  Including rest allowance in mixed-model assembly lines , 2020, Int. J. Prod. Res..

[3]  Ole Broberg,et al.  Human-centered design of work systems in the transition to industry 4.0. , 2020, Applied ergonomics.

[4]  Eric H. Grosse,et al.  Industry 4.0 and the human factor – A systems framework and analysis methodology for successful development , 2020 .

[5]  Konrad Wegener,et al.  Optimizing human–robot task allocation using a simulation tool based on standardized work descriptions , 2020, J. Intell. Manuf..

[6]  Robin Hanson,et al.  Automated order picking systems and the links between design and performance: a systematic literature review , 2020, Int. J. Prod. Res..

[7]  Minna Lanz,et al.  AR-based interaction for human-robot collaborative manufacturing , 2020, Robotics Comput. Integr. Manuf..

[8]  Assadej Vanichchinchai,et al.  An Ergonomics-Based Storage Bin Allocation for Picking Efficiency Improvement , 2020, 2020 IEEE 7th International Conference on Industrial Engineering and Applications (ICIEA).

[9]  Daria Battini,et al.  Workers’ rest allowance and smoothing of the workload in assembly lines , 2020, Int. J. Prod. Res..

[10]  Matteo Mario Savino,et al.  Empirical study to explore the impact of ergonomics on workforce scheduling , 2020, Int. J. Prod. Res..

[11]  Teresa Murino,et al.  The evolution of man–machine interaction: the role of human in Industry 4.0 paradigm , 2020, Production & Manufacturing Research.

[12]  Werner Kurschl,et al.  Assembly Task Analysis Using the General Assembly Task Model (GATM) on the Shop Floor , 2020 .

[13]  Daria Battini,et al.  Human-Oriented Assembly Line Balancing and Sequencing Model in the Industry 4.0 Era , 2020 .

[14]  Fabio Sgarbossa,et al.  Human factors in production and logistics systems of the future , 2020, Annu. Rev. Control..

[15]  Marcello Pellicciari,et al.  Exploring the potential of Operator 4.0 interface and monitoring , 2020, Comput. Ind. Eng..

[16]  Åsa Fast-Berglund,et al.  Forming a cognitive automation strategy for Operator 4.0 in complex assembly , 2020, Comput. Ind. Eng..

[17]  Christoph H. Glock,et al.  Ergonomic and economic optimization of layout and item assignment of a U-shaped order picking zone , 2019, Comput. Ind. Eng..

[18]  Ole Broberg,et al.  Current research and future perspectives on human factors and ergonomics in Industry 4.0 , 2019, Comput. Ind. Eng..

[19]  Debjit Roy,et al.  Robotized and Automated Warehouse Systems: Review and Recent Developments , 2019, Transp. Sci..

[20]  Jean D. Hallewell Haslwanter,et al.  Perspectives on Assistive Systems for Manual Assembly Tasks in Industry , 2019, Technologies.

[21]  Chase C. Murray,et al.  Robotics in order picking: evaluating warehouse layouts for pick, place, and transport vehicle routing systems , 2018, Int. J. Prod. Res..

[22]  Alessandro Persona,et al.  A model for rest allowance estimation to improve tasks assignment to operators , 2018, Int. J. Prod. Res..

[23]  Sunwook Kim,et al.  Influences of augmented reality head-worn display type and user interface design on performance and usability in simulated warehouse order picking. , 2019, Applied ergonomics.

[24]  Richard Wells,et al.  Production quality and human factors engineering: A systematic review and theoretical framework. , 2018, Applied ergonomics.

[25]  R. Motmans,et al.  Effect of a Passive Exoskeleton on Muscle Activity and Posture During Order Picking , 2018, Advances in Intelligent Systems and Computing.

[26]  Gerhard Rinkenauer,et al.  The Attentional Perspective on Smart Devices: Empirical Evidence for Device-Specific Cognitive Ergonomics , 2018, Advances in Ergonomics in Design.

[27]  Safwan Altarazi,et al.  Concurrent manual-order-picking warehouse design: a simulation-based design of experiments approach , 2018, Int. J. Prod. Res..

[28]  Christopher Hart,et al.  Doing a Literature Review: Releasing the Research Imagination (2nd Edition) , 2019, The Cognitive Psychology Bulletin.

[29]  Salvatore Miranda,et al.  Human reliability in manual assembly systems: a Systematic Literature Review. , 2018 .

[30]  Laine Mears,et al.  A complementary Cyber-Human Systems framework for Industry 4.0 Cyber-Physical Systems , 2018 .

[31]  Christoph H. Glock,et al.  Analysis of economic and ergonomic performance measures of different rack layouts in an order picking warehouse , 2017, Comput. Ind. Eng..

[32]  Christoph H. Glock,et al.  The effects of human behavior on the efficiency of routing policies in order picking: The case of route deviations , 2017, Comput. Ind. Eng..

[33]  Yoon Seok Chang,et al.  Assessment and Comparison of Human-Robot Co-work Order Picking Systems Focused on Ergonomic Factors , 2017 .

[34]  Daria Battini,et al.  Additional effort estimation due to ergonomic conditions in order picking systems , 2017, Int. J. Prod. Res..

[35]  Christoph H. Glock,et al.  Human factors in order picking: a content analysis of the literature , 2017, Int. J. Prod. Res..

[36]  Martina Berglund,et al.  HTO - A complementary ergonomics approach. , 2017, Applied ergonomics.

[37]  W. Patrick Neumann,et al.  Incorporating human factors-related performance variation in optimizing a serial system , 2017, Eur. J. Oper. Res..

[38]  Per Medbo,et al.  Simulating operator learning during production ramp-up in parallel vs. serial flow production , 2017, Int. J. Prod. Res..

[39]  Jack T Dennerlein,et al.  Job rotation designed to prevent musculoskeletal disorders and control risk in manufacturing industries: A systematic review. , 2017, Applied ergonomics.

[40]  Salvatore Miranda,et al.  Methodology for the analysis and quantification of human error probability in manufacturing systems , 2016, 2016 IEEE Student Conference on Research and Development (SCOReD).

[41]  Selim Zaim,et al.  The Impact of Technology Transfer Performance on Total Quality Management and Quality Performance , 2016 .

[42]  Christoph H. Glock,et al.  Human energy expenditure in order picking storage assignment: A bi-objective method , 2016, Comput. Ind. Eng..

[43]  Alexandre Dolgui,et al.  Ergonomics in assembly line balancing based on energy expenditure: a multi-objective model , 2016 .

[44]  Chee Yew Wong,et al.  Empirical investigation of alternate cumulative capability models: a multi-method approach , 2016 .

[45]  Patrick Neumann,et al.  Integrating Ergonomics Aspects Into Operations Management Performance Optimization Models: A Modeling Framework , 2016 .

[46]  Christoph H. Glock,et al.  The effect of worker learning on manual order picking processes , 2015 .

[47]  W. Patrick Neumann,et al.  An innovative modeling method to evaluate Human factor effects on the performance of manufacturing systems , 2015, 2015 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM).

[48]  Åsa Fast-Berglund,et al.  Towards a Human-Centred Reference Architecture for Next Generation Balanced Automation Systems: Human-Automation Symbiosis , 2015, APMS.

[49]  W. P. Neumann,et al.  Ergonomists’ and Engineers’ Views on the Utility of Virtual Human Factors Tools , 2015 .

[50]  Daria Battini,et al.  A comparative analysis of different paperless picking systems , 2015, Ind. Manag. Data Syst..

[51]  W. Patrick Neumann,et al.  Investigating work-related ill health effects in optimizing the performance of manufacturing systems , 2015, Eur. J. Oper. Res..

[52]  Christoph H. Glock,et al.  Incorporating human factors in order picking planning models: framework and research opportunities , 2015 .

[53]  Sotiris Makris,et al.  Design Considerations for Safe Human-robot Collaborative Workplaces , 2015 .

[54]  Paul H.P. Yeow,et al.  Ergonomics Improvement in Order Selection in a Refrigerated Environment , 2014 .

[55]  Christoph H. Glock,et al.  Production Economics and the Learning Curve: A Meta-Analysis , 2014 .

[56]  Christoph H. Glock,et al.  An experimental investigation of learning effects in order picking systems (angenommen) , 2013 .

[57]  J Village,et al.  Ergonomics action research II: a framework for integrating HF into work system design , 2012, Ergonomics.

[58]  V. R. Babu 1 – Concepts of production and productivity , 2012 .

[59]  Isabel L Nunes,et al.  Integration of human factors principles in LARG organizations--a conceptual model. , 2012, Work.

[60]  L. Punnett,et al.  Physical and psychosocial ergonomic risk factors for low back pain in automobile manufacturing workers , 2011, Occupational and Environmental Medicine.

[61]  K. Mosier,et al.  Judgment and Decision Making by Individuals and Teams: Issues, Models, and Applications , 2010 .

[62]  Paul H.P. Yeow,et al.  Ergonomics improvement in a harsh environment using an audio feedback system , 2010 .

[63]  J. Dul,et al.  Human factors: spanning the gap between OM and HRM , 2010 .

[64]  Thad Starner,et al.  An empirical task analysis of warehouse order picking using head-mounted displays , 2010, CHI.

[65]  Willibald A. Günthner,et al.  Evaluation of an Augmented Reality Supported Picking System Under Practical Conditions , 2010, Comput. Graph. Forum.

[66]  Aurelija Burinskiene Order picking process at warehouses , 2010 .

[67]  Svend Erik Mathiassen,et al.  Systematic evaluation of observational methods assessing biomechanical exposures at work. , 2010, Scandinavian journal of work, environment & health.

[68]  Wei Zhou,et al.  Simulating Complex Automotive Assembly Tasks using the HUMOSIM Framework , 2009 .

[69]  Karel Brookhuis,et al.  Handbook of Human Factors and Ergonomics Methods , 2009 .

[70]  W.P. Neumann,et al.  Integrating human factors into discrete event simulations of parallel flow strategies , 2009 .

[71]  Bobbie D. Seppelt,et al.  Human Factors in Automation Design , 2009, Handbook of Automation.

[72]  Anne Bruseberg Human Views for MODAF as a Bridge Between Human Factors Integration and Systems Engineering , 2008 .

[73]  Pia Oedewald,et al.  Assessment of complex sociotechnical systems – Theoretical issues concerning the use of organizational culture and organizational core task concepts , 2007 .

[74]  Kees Jan Roodbergen,et al.  Design and control of warehouse order picking: A literature review , 2006, Eur. J. Oper. Res..

[75]  S. Elbanna Strategic Decision-Making: Process Perspectives , 2006 .

[76]  Sarah Fletcher,et al.  Towards a theoretical framework for human performance modelling within manufacturing systems design , 2005, Simul. Model. Pract. Theory.

[77]  Dennis W. Krumwiede,et al.  The relationship of logistics to supply chain management: developing a common industry definition , 2001, Ind. Manag. Data Syst..

[78]  W. Wilhelm,et al.  Strategic, tactical and operational decisions in multi-national logistics networks: A review and discussion of modelling issues , 2000 .

[79]  Biman Das,et al.  Development of a comprehensive industrial work design model , 1999 .

[80]  E. Occhipinti OCRA: a concise index for the assessment of exposure to repetitive movements of the upper limbs. , 1998, Ergonomics.

[81]  Russell D. Meller,et al.  The facility layout problem: Recent and emerging trends and perspectives , 1996 .

[82]  Matthew B. Miles,et al.  Qualitative Data Analysis: An Expanded Sourcebook , 1994 .

[83]  Thomas E. Nygren,et al.  The Subjective Workload Assessment Technique: A Scaling Procedure for Measuring Mental Workload , 1988 .

[84]  S. Hart,et al.  Development of NASA-TLX (Task Load Index): Results of Empirical and Theoretical Research , 1988 .