New mask design approach for UV laser micromachining to reduce stitching errors

This paper describes a new approach to mask design as well as a new pulsed laser micromachining strategy referred to as “Common Nest” (CN) to reduce stitching errors, need for programming offsets, and alignment problems. The CN mask design approach breaks down a microchannel pattern shape into subfeature shapes which are related by a common origin. CN allows major improvements to be made in the accuracy, speed, and efficiency with which complex microstructures can be created by laser ablation. The details and a computer-aided design tool concept design for this method are presented. Experiments to evaluate this method and examples of Y-shaped and serpentine microchannel machining are reported.

[1]  Hassan Aref,et al.  Chaotic advection by laminar flow in a twisted pipe , 1989, Journal of Fluid Mechanics.

[2]  Kukjin Chun,et al.  Fabrication of an electrostatic track-following micro actuator for hard disk drives using SOI wafer , 2001 .

[3]  Konstantinos Salonitis,et al.  Nanomanufacturing processes: a critical review , 2004 .

[4]  Nadeem Hasan Rizvi,et al.  Laser micromachining: new developments and applications , 2000, LASE.

[5]  Pio G. Iovenitti,et al.  Automated generation of NC part programs for excimer laser ablation micromachining from known 3D surfaces , 2002, SPIE Micro + Nano Materials, Devices, and Applications.

[6]  Michael G. Olsen,et al.  Passive mixing in microchannels: Fabrication and flow experiments , 2001 .

[7]  F. Bigl,et al.  Excimer laser micromachining and replication of 3D optical surfaces , 1998 .

[8]  F. Bigl,et al.  Combination of different processing methods for the fabrication of 3D polymer structures by excimer laser machining , 2000 .

[9]  Hengzi Wang.  Passive mixing in microchannels with geometric variations , 2004 .

[10]  Erol C. Harvey,et al.  Fabrication techniques and their application to produce novel micromachined structures and devices using excimer laser projection , 1997, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[11]  Ric M. Allott,et al.  New techniques for laser micromachining MEMS devices , 2002, SPIE High-Power Laser Ablation.

[12]  E. Mutapcic.  Optimised part programs for excimer laser-ablation micromachining directly from 3D CAD models , 2006 .

[13]  Syed H. Masood,et al.  Application of fused deposition modeling rapid prototyping system to the development of microchannels , 2001, SPIE Micro + Nano Materials, Devices, and Applications.

[14]  Hans K. Toenshoff,et al.  NC-controlled production of smooth 3D surfaces in brittle materials with 193-nm excimer laser , 1998, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[15]  Erol C. Harvey,et al.  Patterning, electroplating and removal of SU-8 moulds by excimer laser micromachining , 2001 .

[16]  H. Aref.  Stirring by chaotic advection , 1984, Journal of Fluid Mechanics.

[17]  Pio G. Iovenitti,et al.  Overlay error effects on polycarbonate structures produced by 248 nm UV laser ablation tool , 2003 .