Automated fiber placement: A review of history, current technologies, and future paths forward

Abstract Automated fiber placement (AFP) is a composite manufacturing technique used to fabricate complex advanced air vehicle structures that are lightweight with superior qualities. The AFP process is intricate and complex with various phases of design, process planning, manufacturing, and inspection. An understanding of each of these phases is necessary to achieve the highest possible manufacturing quality. This literature review aims to summarize the entire AFP process from the design of the structure through inspection of the manufactured part to generate an overall understanding of the lifecycle of AFP manufacturing. The review culminates with highlighting the challenges and future directions for AFP with the goal of achieving a closed loop AFP process.

[1]  Daniel Ziener,et al.  Throughput Optimizations for FPGA-based Deep Neural Network Inference , 2018, Microprocess. Microsystems.

[2]  Timothy G. Gutowski,et al.  Advanced composites manufacturing , 1997 .

[3]  J.-B. Le Cam,et al.  Modelling slit tape buckling during automated prepreg manufacturing: A local approach , 2011 .

[4]  Ramy Harik,et al.  In-plane tow deformations due to steering in automated fiber placement , 2019, AIAA Scitech 2019 Forum.

[5]  Christopher Sacco,et al.  Machine Learning Methods for Rapid Inspection of Automated Fiber Placement Manufactured Composite Structures , 2019 .

[6]  Berend Denkena,et al.  Thermal Image-based Monitoring for the Automated Fiber Placement Process , 2017 .

[7]  Z. Gürdal,et al.  Characterization of viscoelastic bending stiffness of uncured carbon-epoxy prepreg slit tape , 2021 .

[8]  Christophe Binetruy,et al.  Dry fiber automated placement of carbon fibrous preforms , 2013 .

[9]  Fazil O. Sonmez,et al.  Analysis of the On-Line Consolidation Process in Thermoplastic Composite Tape Placement , 1997 .

[10]  Todd Rudberg,et al.  Automated In-Process Inspection System for AFP Machines , 2015 .

[11]  An Experimental Investigation Concerning the Effects of AFP Defects on Progressive Failure of Tensile Coupons , 2019, AIAA Scitech 2019 Forum.

[12]  Michaël Bruyneel,et al.  A modified Fast Marching Method for defining fiber placement trajectories over meshes , 2013 .

[13]  Dawn C. Jegley,et al.  Optimization of Elastically Tailored Tow-Placed Plates with Holes , 2003 .

[14]  Geoffrey E. Hinton,et al.  ImageNet classification with deep convolutional neural networks , 2012, Commun. ACM.

[15]  H. Alicia Kim,et al.  New optimization method for steered fiber composites using the level set method , 2015 .

[16]  Roberta E. Martin,et al.  Carnegie Airborne Observatory-2: Increasing science data dimensionality via high-fidelity multi-sensor fusion , 2012 .

[17]  Susan C. Mantell,et al.  Manufacturing Process Models for Thermoplastic Composites , 1992 .

[18]  R. Harik,et al.  Characterization of steered fiber laminates: Perspectives and a survey of the state of the art on principal considerations , 2021 .

[19]  M. Sutton,et al.  Characterization of Mode I and Mode II traction–separation laws for cohesive separation of uncured thermoset tows , 2019, International Journal of Fracture.

[20]  Ramy Harik,et al.  Optimization of Cylinders with Holes under Bending using Nonconventional Laminates , 2018 .

[21]  Suresh G. Advani,et al.  A Non-Isothermal Process Model for Consolidation and Void Reduction during In-Situ Tow Placement of Thermoplastic Composites , 1995 .

[22]  Y. Ke,et al.  Modeling and experimental validation of compaction pressure distribution for automated fiber placement , 2021, Composite Structures.

[23]  M. Sutton,et al.  Simulations and experiments for automated fiber placement of prepreg slit tape: Wrinkle formation and fundamental observations , 2020 .

[24]  Nicholas A. Warrior,et al.  The experimental determination of prepreg tack and dynamic stiffness , 2012 .

[25]  Paulo Silva,et al.  A Validation Study of a Physics-based Tack Model for an Automated Fiber Placement Process Simulation , 2019 .

[26]  Simon Astwood,et al.  A review on design for manufacture of variable stiffness composite laminates , 2016 .

[27]  Ramy Harik,et al.  Integrated Design and Manufacturing Analysis for Automated Fiber Placement Structures , 2019 .

[28]  Russell DeVlieg,et al.  High-Speed Fiber Placement on Large Complex Structures , 2007 .

[29]  Medium Wave Infrared Heater for High-Speed Fiber Placement , 2007 .

[30]  Z. Gürdal,et al.  Fiber Tow Deformations During Layup of Steered Paths Using Automated Fiber Placement Process , 2019, SAMPE 2019 - Charlotte, NC.

[31]  Brian A. Weiss,et al.  Industrial Robot Accuracy Degradation Monitoring and Quick Health Assessment , 2019, Journal of Manufacturing Science and Engineering.

[32]  Robert L. Anderson,et al.  Advanced fiber placement of composite fuselage structures , 1991 .

[33]  Qi Tian,et al.  Zigzag Learning for Weakly Supervised Object Detection , 2018, 2018 IEEE/CVF Conference on Computer Vision and Pattern Recognition.

[34]  Berend Denkena,et al.  Influence of AFP Process Parameters on the Temperature Distribution Used for Thermal in-process Monitoring , 2017 .

[35]  Damiano Pasini,et al.  Optimization of variable stiffness composites with embedded defects induced by Automated Fiber Placement , 2014 .

[36]  Tinne Tuytelaars,et al.  Weakly supervised object detection with convex clustering , 2015, 2015 IEEE Conference on Computer Vision and Pattern Recognition (CVPR).

[37]  K. Drechsler,et al.  Thermoset Prepreg Compaction during Automated Fiber Placement and Vacuum Debulking , 2019, Procedia CIRP.

[38]  Min Meng,et al.  Ultrasonic signal classification and imaging system for composite materials via deep convolutional neural networks , 2017, Neurocomputing.

[39]  K. Rother,et al.  Determination of convective heat transfer coefficient for hot gas torch (HGT)-assisted automated fiber placement (AFP) for thermoplastic composites , 2021, Journal of Thermoplastic Composite Materials.

[40]  K. Potter,et al.  Heater power control for multi-material, variable speed Automated Fibre Placement , 2017 .

[41]  A. Radwan.  Experimental Analysis of the Automated Fiber Placement Manufacturing Parameters for High and Low Tack Prepreg Material , 2019 .

[42]  Xiu-Shen Wei,et al.  Unsupervised Object Discovery and Co-Localization by Deep Descriptor Transforming , 2017, ArXiv.

[43]  Ralf Schledjewski,et al.  Tracing the Void Content Development and Identification of its Effecting Parameters during in Situ Consolidation of Thermoplastic Tape Material , 2010 .

[44]  Justin Nielson,et al.  Production Implementation of Multiple Machine, High Speed Fiber Placement for Large Structures , 2010 .

[45]  Z. Qureshi,et al.  In situ consolidation of thermoplastic prepreg tape using automated tape placement technology: Potential and possibilities , 2014 .

[46]  Huy Pham,et al.  Nondestructive evaluation sensor fusion with autonomous robotic system for civil infrastructure inspection , 2018, J. Field Robotics.

[47]  Ginu Rajan,et al.  In-situ simultaneous measurement of strain and temperature in automated fiber placement (AFP) using optical fiber Bragg grating (FBG) sensors , 2017 .

[48]  Christopher Sacco,et al.  Automated Fiber Placement Defects: Automated Inspection and Characterization , 2018 .

[49]  Joelle Pineau,et al.  Spatially Invariant Unsupervised Object Detection with Convolutional Neural Networks , 2019, AAAI.

[50]  Stephen R Hallett,et al.  Understanding and predicting defect formation in automated fibre placement pre-preg laminates , 2017 .

[51]  L. Lessard,et al.  Surrogate-based multi-objective optimization of a composite laminate with curvilinear fibers , 2012 .

[52]  Theodoros H. Loutas,et al.  Intelligent health monitoring of aerospace composite structures based on dynamic strain measurements , 2012, Expert Syst. Appl..

[53]  X. Legrand,et al.  Fibre placement processes for composites manufacture , 2015 .

[54]  Ralf Schledjewski,et al.  Parametric study on processing parameters and resulting part quality through thermoplastic tape placement process , 2013 .

[55]  Zafer Gürdal,et al.  Optimization of course locations in fiber-placed panels for general fiber angle distributions , 2010 .

[56]  Zafer Gürdal,et al.  Design of variable–stiffness laminates using lamination parameters , 2006 .

[57]  Paul M. Weaver,et al.  Limitations of fibre placement techniques for variable angle tow composites and their process-induced defects , 2011 .

[58]  Ramy Harik,et al.  Automated Fiber Placement Path Planning: A state-of-the-art review , 2018, Computer-Aided Design and Applications.

[59]  Marc-Andre Octeau,et al.  Impact of layup rate on the quality of fiber steering/cut-restart in automated fiber placement processes , 2015 .

[60]  Damiano Pasini,et al.  Optimum stacking sequence design of composite materials Part II: Variable stiffness design , 2010 .

[61]  Multiscale Collaborative Optimization of Processing Parameters for Carbon Fiber/Epoxy Laminates Fabricated by High-Speed Automated Fiber Placement , 2016 .

[62]  D MooreJeron,et al.  Design for Manufacturing: Laminate Focused Design and Analysis Tools for Automated Composites Manufacturing , 2019 .

[63]  M. Hojjati,et al.  Effect of compaction roller on layup quality and defects formation in automated fiber placement , 2020, Journal of Reinforced Plastics and Composites.

[64]  Nicholas M. Patrikalakis,et al.  Shape Interrogation for Computer Aided Design and Manufacturing , 2002, Springer Berlin Heidelberg.

[65]  Jian Sun,et al.  Identity Mappings in Deep Residual Networks , 2016, ECCV.

[66]  Kara Peters,et al.  Experimental verification of response of embedded optical fiber Bragg grating sensors in non-homogeneous strain fields , 2000 .

[67]  Paul M. Weaver,et al.  A study of the influence of processing parameters on steering of carbon Fibre/PEEK tapes using laser-assisted tape placement , 2019, Composites Part B: Engineering.

[68]  Yong Li,et al.  Placeability restricted by in-complete contact between laying roller and mould in an automated fiber placement process , 2018 .

[69]  K. Drechsler,et al.  Analysis and improved process response prediction of laser- assisted automated tape placement with PA-6/carbon tapes using Design of Experiments and numerical simulations , 2017 .

[70]  Justin Nielson,et al.  Improving AFP Cell Performance , 2014 .

[71]  A. Bruce Hulcher,et al.  Conformable compaction system used in automated fiber placement of large composite aerospace structures , 2002 .

[72]  Roland Hinterhölzl,et al.  Simulation and experimental validation of gaps and bridging in the automated fiber placement process , 2015 .

[73]  Nima Bakhshi,et al.  An experimental and simulative study on the defects appeared during tow steering in automated fiber placement , 2018, Composites Part A: Applied Science and Manufacturing.

[74]  Mehdi Hojjati,et al.  Processing of thermoplastic matrix composites through automated fiber placement and tape laying methods , 2018 .

[75]  Shi Lei.  Simulation based optimization on automated fibre placement process , 2018 .

[76]  Zafer Gurdal,et al.  A Theoretical Model to Study the Influence of Tow-drop Areas on the Stiffness and Strength of Variable-stiffness Laminates , 2009 .

[77]  Kevin D Potter,et al.  Exploring the Manual Forming of Complex Geometry Composite Panels for Productivity and Quality Gains in Relation to Automated Forming Capabilities , 2011 .

[78]  B. Denkena,et al.  Machine Learning Approach for Optimization of Automated Fiber Placement Processes , 2017 .

[79]  P. Juarez,et al.  In situ thermal inspection of automated fiber placement manufacturing , 2019, CAMX 2019.

[80]  Lars Wienbrandt,et al.  1000× faster than PLINK: Combined FPGA and GPU accelerators for logistic regression-based detection of epistasis , 2019, J. Comput. Sci..

[81]  Tack Measurements of Prepreg Tape at Variable Temperature and Humidity , 2017 .

[82]  Jan-Anders E. Månson,et al.  Material phenomena controlling rapid processing of thermoplastic composites , 2001 .

[84]  Cao Vu Dung,et al.  Autonomous concrete crack detection using deep fully convolutional neural network , 2019, Automation in Construction.

[85]  Berend Denkena,et al.  Evaluation of eddy current testing for quality assurance and process monitoring of automated fiber placement , 2014 .

[86]  Xilun Ding,et al.  Modelling and layout design for an automated fibre placement mechanism , 2020 .

[87]  M. Leblanc,et al.  Continuous arbitrary strain profile measurements with fiber Bragg gratings , 1998 .

[88]  Path optimization for open-contoured structures in Robotic Fibre Placement , 2017, 2017 32nd Youth Academic Annual Conference of Chinese Association of Automation (YAC).

[89]  Mehdi Hojjati,et al.  Wrinkle formation during steering in automated fiber placement: Modeling and experimental verification , 2018 .

[90]  L. Warnet,et al.  On the weld strength of in situ tape placed reinforcements on weave reinforced structures , 2012 .

[91]  Ginu Rajan,et al.  The influence of consolidation force on the performance of AFP manufactured laminates , 2017 .

[92]  Steven J. E. Wilton,et al.  LeFlow: Enabling Flexible FPGA High-Level Synthesis of Tensorflow Deep Neural Networks , 2018, ArXiv.

[93]  H. Thomas Hahn,et al.  Analysis of Process-Induced Residual Stresses in Tape Placement , 2002 .

[94]  Christopher Sacco,et al.  Machine learning in composites manufacturing: A case study of Automated Fiber Placement inspection , 2020 .

[95]  Ilian A. Bonev,et al.  Simultaneous path placement and trajectory planning optimization for a redundant coordinated robotic workcell , 2018, Mechanism and Machine Theory.

[96]  Damiano Pasini,et al.  Optimum stacking sequence design of composite materials Part I: Constant stiffness design , 2009 .

[97]  J. Gillespie,et al.  Crystallization kinetics behavior of PEEK based composites exposed to high heating and cooling rates , 2004 .

[98]  David Maass,et al.  Progress in automated ply inspection of AFP layups , 2015 .

[99]  Kevin D Potter,et al.  On the development of multi-material Automated Fibre Placement technology , 2015 .

[100]  S. Güçeri,et al.  Effects of processing on laser assisted thermoplastic tape consolidation , 1997 .

[101]  Wayne Luk,et al.  FP-BNN: Binarized neural network on FPGA , 2018, Neurocomputing.

[102]  J. Seferis,et al.  Analysis and characterization of prepreg tack , 1992 .

[103]  Ramy Harik,et al.  Geometrical modeling of tow wrinkles in automated fiber placement , 2020 .

[104]  Bernhard Schölkopf,et al.  Spatio-Temporal Transformer Network for Video Restoration , 2018, ECCV.

[105]  R. Pitchumani,et al.  Nonisothermal healing and interlaminar bond strength evolution during thermoplastic matrix composites processing , 2003 .

[106]  K. Potter,et al.  The engineering aspects of automated prepreg layup: History, present and future , 2012 .

[107]  Christopher Sacco,et al.  Machine Learning Based AFP Inspection: A Tool for Characterization and Integration , 2019, SAMPE 2019 - Charlotte, NC.

[108]  Berend Denkena,et al.  Thermographic online monitoring system for Automated Fiber Placement processes , 2016 .

[109]  Suong van Hoa,et al.  Determination of convective heat transfer coefficient for automated fiber placement (AFP) for thermoplastic composites using hot gas torch , 2020 .

[110]  Biliyar Bhat,et al.  Materials and processing technologies for highly reusable vehicles and propulsion systems , 1997 .

[111]  Bernt Schiele,et al.  Meta-Transfer Learning for Few-Shot Learning , 2018, 2019 IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR).

[112]  Ramy Harik,et al.  Efficient design optimization of nonconventional laminated composites using lamination parameters: A state of the art , 2019, Composite Structures.

[113]  A. Béakou,et al.  Experimental Analysis of Prepreg Tack , 2010 .

[114]  Berend Denkena,et al.  Automated Fiber Placement Head for Manufacturing of Innovative Aerospace Stiffening Structures , 2016 .

[115]  Jorge Pomares,et al.  FPGA-based visual control system using dynamic perceptibility , 2016 .

[116]  D. Walczyk,et al.  Ultrasonic consolidation of thermoplastic composite prepreg for automated fiber placement , 2016 .

[117]  Bijan Shirinzadeh,et al.  Robotic fiber placement process analysis and optimization using response surface method , 2011 .

[118]  D. Peeters,et al.  Steering of Carbon Fiber/Thermoplastic Pre-preg Tapes using Laser-Assisted Tape Placement , 2018 .

[119]  Yu Qiao,et al.  TTPP: Temporal Transformer with Progressive Prediction for Efficient Action Anticipation , 2020, Neurocomputing.

[120]  Bartosz Krawczyk,et al.  GPU-Accelerated Extreme Learning Machines for Imbalanced Data Streams with Concept Drift , 2016, ICCS.

[121]  Bijan Shirinzadeh,et al.  Trajectory generation for open-contoured structures in robotic fibre placement , 2007 .

[122]  Ralf Schledjewski,et al.  Identification of some optimal parameters to achieve higher laminate quality through tape placement process , 2010 .

[123]  George Marsh,et al.  Automating aerospace composites production with fibre placement , 2011 .

[124]  B. Hasenjaeger,et al.  Programming and Simulating Automated Fiber Placement (AFP) CNC Machines , 2013 .

[125]  S. Güçeri,et al.  Experimental Investigation of Laser-Assisted Thermoplastic Tape Consolidation , 1988 .

[126]  Damiano Pasini,et al.  Experimental study of the effect of automated fiber placement induced defects on performance of composite laminates , 2011 .

[127]  Michaël Bruyneel,et al.  Optimization of composite structures with curved fiber trajectories , 2014 .

[128]  P. Juarez,et al.  In-situ thermography of automated fiber placement parts , 2018 .

[129]  Raymond M. Measures,et al.  Smart composite structures with embedded sensors , 1992 .

[130]  Richard D. Hale,et al.  Approximate Geometric Methods in Application to the Modeling of Fiber Placed Composite Structures , 2004, J. Comput. Inf. Sci. Eng..

[131]  Guanxing Huang,et al.  An efficient reanalysis assisted optimization for variable-stiffness composite design by using path functions , 2016 .

[132]  Kyle A. Jeffries,et al.  Enhanced Robotic Automated Fiber Placement with Accurate Robot Technology and Modular Fiber Placement Head , 2013 .

[133]  Richard Crossley,et al.  Time–temperature equivalence in the tack and dynamic stiffness of polymer prepreg and its application to automated composites manufacturing , 2013 .

[134]  Todd Rudberg,et al.  A Process for Delivering Extreme AFP Head Reliability , 2019 .

[135]  Andrew C. Long,et al.  Understanding the buckling behaviour of steered tows in Automated Dry Fibre Placement (ADFP) , 2016 .

[136]  Ginu Rajan,et al.  In situ process monitoring for automated fibre placement using fibre Bragg grating sensors , 2016 .

[137]  M. Hojjati,et al.  Time-dependent wrinkle formation during tow steering in automated fiber placement , 2019, Composites Part B: Engineering.

[138]  Qiang Yang,et al.  A Survey on Transfer Learning , 2010, IEEE Transactions on Knowledge and Data Engineering.

[139]  R. Harik,et al.  Influence of process parameters in AFP fiber steering on cylinders: Constant curvature paths , 2020 .

[140]  Z. Gürdal,et al.  Experimental investigation of prepreg slit tape wrinkling during automated fiber placement process using StereoDIC , 2019, Composites Part B: Engineering.

[141]  Fazil O. Sonmez,et al.  Modeling of Heat Transfer and Crystallization in Thermoplastic Composite Tape Placement Process , 1997 .

[142]  Brian Tatting,et al.  Tow-Placement Technology and Fabrication Issues for Laminated Composite Structures , 2005 .

[143]  Roudy Wehbe,et al.  Modeling Of Tow Wrinkling In Automated Fiber Placement Based On Geometrical Considerations , 2017 .

[144]  Ramy Harik,et al.  Development of a Design for Manufacturing Tool for Automated Fiber Placement Structures , 2019 .

[145]  Eryi Hu,et al.  Surface profile inspection of a moving object by using dual-frequency Fourier transform profilometry , 2011 .

[146]  Paul Compston,et al.  The effect of processing temperature and placement rate on the short beam strength of carbon fibre-PEEK manufactured using a laser tape placement process , 2015 .

[147]  G Dorey,et al.  Carbon fibres and their applications , 1987 .

[148]  Ramy Harik,et al.  Maturity assessment of the laminate variable stiffness design process , 2017 .

[149]  Carroll G. Grant,et al.  Automated fiber placement: Evolution and current demonstrations , 1993 .

[150]  Brice A. Johnson,et al.  Characterisation of tack for uni-directional prepreg tape employing a continuous application-and-peel test method , 2018, Composites Part A: Applied Science and Manufacturing.