Effects of wettability on the film-forming property of modified cement paste

[1]  Qing Wang,et al.  Amphiphobic concrete with good oil stain resistance and anti-corrosion properties used in marine environment , 2021 .

[2]  Xianhai Li,et al.  Investigation of the bond strength and microstructure of the interfacial transition zone between cement paste and aggregate modified by Bayer red mud. , 2021, Journal of hazardous materials.

[3]  Ning Wang,et al.  Chemical Fabrication Strategies for Achieving Bioinspired Superhydrophobic Surfaces with Micro and Nanostructures: A Review , 2020, Advanced Engineering Materials.

[4]  Xudong Chen,et al.  Mix design for recycled aggregate pervious concrete based on response surface methodology , 2020 .

[5]  Haibing Zheng,et al.  Conceptual design and performance evaluation of high strength pervious concrete , 2020 .

[6]  X. Qian,et al.  Effect of different wind speeds and sealed curing time on early-age shrinkage of cement paste , 2020 .

[7]  Prinya Chindaprasirt,et al.  Fabrication of self-cleaning fly ash/polytetrafluoroethylene material for cement mortar spray-coating , 2020 .

[8]  Ning Wang,et al.  Fabrication of superhydrophobic concrete used in marine environment with anti-corrosion and stable mechanical properties , 2020 .

[9]  G. Shafabakhsh,et al.  Surface free energy and adhesion energy evaluation of modified bitumen with recycled carbon black (micro-nano) from gases and petrochemical waste , 2020 .

[10]  D. Hou,et al.  Fabrication of superhydrophobicity on foamed concrete surface by GO/silane coating , 2020 .

[11]  Tao Meng,et al.  Effect of Nano-SiO2 on the Mechanical Properties, Microstructure, and Hydration Process of Cementitious Materials Incorporating Hydrophobic Admixture , 2020 .

[12]  Qiang Ren,et al.  Performance and ITZ of pervious concrete modified by vinyl acetate and ethylene copolymer dispersible powder , 2020, Construction and Building Materials.

[13]  N. Xie,et al.  Investigation on surface free energy and moisture damage of asphalt mortar with fine solid waste , 2020 .

[14]  Ning Wang,et al.  Environmentally-friendly fabrication of a recyclable oil-water separation material using copper mesh for immiscible oil/water mixtures , 2019 .

[15]  Ting Xie,et al.  Integral hydrophobic concrete without using silane , 2019 .

[16]  M. Cai,et al.  Influence of new hydrophobic agent on the mechanical properties of modified cemented paste backfill , 2019, Journal of Materials Research and Technology.

[17]  Gang Wang,et al.  Simple fabrication of concrete with remarkable self-cleaning ability, robust superhydrophobicity, tailored porosity, and highly thermal and sound insulation. , 2019, ACS applied materials & interfaces.

[18]  C. Poon,et al.  Sustainable design of pervious concrete using waste glass and recycled concrete aggregate , 2019, Journal of Cleaner Production.

[19]  Ning Wang,et al.  Fabrication of superhydrophobic green surfaces with good self-cleaning, chemical stability and anti-corrosion properties , 2019, Journal of Materials Science.

[20]  Ning Wang,et al.  Fabrication of multifunctional amphiphobic surfaces on copper substrates , 2019, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

[21]  Shengjia Li,et al.  Experimental investigation on the flexural behavior of pervious concrete beams reinforced with geogrids , 2019, Construction and Building Materials.

[22]  D. Zou,et al.  Strength enhancement of recycled aggregate pervious concrete using a cement paste redistribution method , 2019, Cement and Concrete Research.

[23]  P. Kianmehr,et al.  Properties of pervious concrete incorporating recycled concrete aggregates and slag , 2019, Construction and Building Materials.

[24]  Daquan Sun,et al.  Influence of aggregate size on compressive strength of pervious concrete , 2019, Construction and Building Materials.

[25]  Ning Wang,et al.  Facile fabrication of amphiphobic surfaces on copper substrates with a mixed modified solution , 2019, RSC advances.

[26]  M. Oeser,et al.  Development of a sustainable pervious pavement material using recycled ceramic aggregate and bio-based polyurethane binder , 2019, Journal of Cleaner Production.

[27]  Aditya Kumar Das,et al.  Evolution of coefficient of friction between tire and pavement under wet conditions using surface free energy technique , 2019, Construction and Building Materials.

[28]  Shupin Wang,et al.  Effect of styrene-butadiene rubber latex on the rheological behavior and pore structure of cement paste , 2019, Composites Part B: Engineering.

[29]  C. Cheeseman,et al.  High-strength clogging resistant permeable pavement , 2019, International Journal of Pavement Engineering.

[30]  W. Xu,et al.  Inexpensive and non-fluorinated superhydrophobic concrete coating for anti-icing and anti-corrosion. , 2019, Journal of colloid and interface science.

[31]  Q. Meng,et al.  Impacts of the water absorption capability on the evaporative cooling effect of pervious paving materials , 2019, Building and Environment.

[32]  Abolfazl Hassani,et al.  Investigating the mechanical and hydraulic characteristics of pervious concrete containing copper slag as coarse aggregate , 2019, Construction and Building Materials.

[33]  Mingkai Zhou,et al.  Utilization of red mud in geopolymer-based pervious concrete with function of adsorption of heavy metal ions , 2019, Journal of Cleaner Production.

[34]  Q. Yu,et al.  Synthesizing super-hydrophobic ground granulated blast furnace slag to enhance the transport property of lightweight aggregate concrete , 2018, Construction and Building Materials.

[35]  A. Ramezanianpour,et al.  Pervious concrete reactive barrier containing nano-silica for nitrate removal from contaminated water , 2018, Environmental Science and Pollution Research.

[36]  Xuezeng Zhao,et al.  Flexible, Durable, and Unconditioned Superoleophobic/Superhydrophilic Surfaces for Controllable Transport and Oil–Water Separation , 2018 .

[37]  Gholam Hossein Hamedi.  Evaluating the effect of asphalt binder modification using nanomaterials on the moisture damage of hot mix asphalt , 2017 .

[38]  Mojtaba Nazari,et al.  Superhydrophobic rice husk ash coating on concrete , 2017 .

[39]  I. Parkin,et al.  Super-robust superhydrophobic concrete , 2017 .

[40]  Shengjie Liu,et al.  Evaluation of moisture susceptibility of foamed warm asphalt produced by water injection using surface free energy method , 2017 .

[41]  M. Lettieri,et al.  Performances and Coating Morphology of a Siloxane-Based Hydrophobic Product Applied in Different Concentrations on a Highly Porous Stone , 2016 .

[42]  P. Smarzewski,et al.  Mechanical and durability related properties of high performance concrete made with coal cinder and waste foundry sand , 2016 .

[43]  Lingchao Lu,et al.  Influence of paste thickness on coated aggregates on properties of high-density sulphoaluminate cement concrete , 2016 .

[44]  B. Dong,et al.  Characterization and evaluation of the surface free energy for cementitious materials , 2016 .

[45]  Christopher K.Y. Leung,et al.  Properties of rubberized concrete modified by using silane coupling agent and carboxylated SBR , 2016 .

[46]  P. Smarzewski,et al.  Influence of hydrophobisation on surface free energy of hybrid fiber reinforced ultra-high performance concrete , 2016 .

[47]  Jiong Hu,et al.  The effect of the cementitious paste thickness on the performance of pervious concrete , 2015 .

[48]  Z. Hossain,et al.  Investigation of moisture damage resistance of GTR-modified asphalt binder by static contact angle measurements , 2015 .

[49]  T. Darmanin,et al.  Highly Polar Linkers (Urea, Carbamate, Thiocarbamate) for Superoleophobic/Superhydrophobic or Oleophobic/Hydrophilic Properties , 2015 .

[50]  Haojie Song,et al.  Polyelectrolyte-fluorosurfactant complex-based meshes with superhydrophilicity and superoleophobicity for oil/water separation , 2015 .

[51]  Patrick Fontana,et al.  The influence of water-repellent admixtures on the behaviour and the effectiveness of Portland limestone cement mortars , 2015 .

[52]  Wei Sun,et al.  Preparation and characteristics of a recycled cement-based superhydrophobic coating with dirt pickup resistance , 2015 .

[53]  Tong Lin,et al.  A superamphiphobic coating with an ammonia-triggered transition to superhydrophilic and superoleophobic for oil-water separation. , 2015, Angewandte Chemie.

[54]  Betiglu Eshete Jimma,et al.  Film-forming ability of flowable cement pastes and its application in mixture proportioning of pervious concrete , 2014 .

[55]  F. Tittarelli,et al.  Effect of hydrophobic admixture and recycled aggregate on physical–mechanical properties and durability aspects of no-fines concrete , 2014 .

[56]  A. Kwan,et al.  Effects of limestone fines on water film thickness, paste film thickness and performance of mortar , 2014 .

[57]  Luca Bertolini,et al.  Use of no-fines concrete as a building material: Strength, durability properties and corrosion protection of embedded steel , 2013 .

[58]  L. G. Li,et al.  Mortar design based on water film thickness , 2011 .

[59]  Jong-Shin Huang,et al.  Microstructure and properties of cement mortars containing organo-modified reservoir sludge , 2010 .

[60]  Mohammed Sonebi,et al.  Rheological properties of grouts with viscosity modifying agents as diutan gum and welan gum incorporating pulverised fly ash , 2006 .