Fe–Co-based crystalline soft magnetic coatings with ultra-high saturation magnetization above 1.9T via co-axial powder feeding plasma-transferred arc welding

[1]  D. Raabe,et al.  A mechanically strong and ductile soft magnet with extremely low coercivity , 2022, Nature.

[2]  Z. Han,et al.  Investigation on the magnetic properties and microstructures of FeCoAlN thin films deposited by doping AlN ceramic chips , 2022, Journal of Materials Science: Materials in Electronics.

[3]  X. Yang,et al.  Multi-scale simulation of columnar-to-equiaxed transition during laser selective melting of rare earth magnesium alloy , 2022, Journal of Materials Science & Technology.

[4]  Ming Li,et al.  Fe-Co-based coating with high hardness and high saturation magnetization deposited by co-axial powder feeding plasma transferred arc welding , 2022, Materials Letters.

[5]  Le-le Cao,et al.  Marine Systems and Equipment Prognostics and Health Management: A Systematic Review from Health Condition Monitoring to Maintenance Strategy , 2022, Machines.

[6]  Weidong Yan,et al.  Supporting performance of magnetic-liquid double suspension bearing under wear of magnetic poles , 2022, DESALINATION AND WATER TREATMENT.

[7]  M. Szczęch.  Research into the lubrication of a rotary lip seal using ferrofluid , 2022 .

[8]  Rui-min Shi,et al.  Effect of magnetic field annealing on soft magnetic properties for (Fe0.5Co0.5)73.5Cu1Nb3Si13.5B9 alloy , 2021, Journal of Materials Science: Materials in Electronics.

[9]  Chun-tao Chang,et al.  Preparation and properties of CoFeMoPB bulk metallic glasses , 2020 .

[10]  A. Kolano-Burian,et al.  Influence of copper addition and heat treatment parameters on nanocrystallization process of Fe-Co-Mo-B-Si amorphous ribbons with high saturation magnetization about 1.6 T , 2020, Journal of Magnetism and Magnetic Materials.

[11]  S. R. Bakshi,et al.  Comparison of microstructure, dilution and wear behavior of Stellite 21 hardfacing on H13 steel using cold metal transfer and plasma transferred arc welding processes , 2019, Surface and Coatings Technology.

[12]  Francisco Werley Cipriano Farias,et al.  Microstructural characterization of Ni-based superalloy 625 clad welded on a 9% Ni steel pipe by plasma powder transferred arc , 2019, Surface and Coatings Technology.

[13]  A. Popov,et al.  Effect of short-range atomic order on macroscopic magnetic properties of equiatomic FePd alloy , 2019, Philosophical Magazine.

[14]  Matthew S. Dargusch,et al.  Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing , 2019, Acta Materialia.

[15]  T. Monson,et al.  Soft magnetic materials for a sustainable and electrified world , 2018, Science.

[16]  V. Kalyankar,et al.  Deposition Characteristics of Multitrack Overlayby Plasma Transferred Arc Welding on SS316Lwith Co-Cr Based Alloy – Influence ofProcess Parameters , 2018, High Temperature Materials and Processes.

[17]  X. L. Xu,et al.  Characterization of Polycrystalline Fe2B Compound with High Saturation Magnetization , 2018 .

[18]  A. Röttger,et al.  Hardness and modulus of Fe 2 B, Fe 3 (C,B), and Fe 23 (C,B) 6 borides and carboborides in the Fe-C-B system , 2018 .

[19]  Zhifeng Liu,et al.  Characterizing the magnetic memory signals on the surface of plasma transferred arc cladding coating under fatigue loads , 2017 .

[20]  A. Inoue,et al.  Soft magnetic Fe-Co-based amorphous alloys with extremely high saturation magnetization exceeding 1.9 T and low coercivity of 2 A/m , 2017 .

[21]  A. Inoue,et al.  Excellent soft magnetic Fe-Co-B-based amorphous alloys with extremely high saturation magnetization above 1.85 T and low coercivity below 3 A/m , 2017 .

[22]  E. Feldshtein,et al.  On the effectiveness of multi-component laser modifying of Fe-based self-fluxing coating with hard particulates , 2016 .

[23]  Amrita Basak,et al.  Epitaxy and Microstructure Evolution in Metal Additive Manufacturing , 2016 .

[24]  Yanyan Zhu,et al.  Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing , 2015 .

[25]  M. Daniil,et al.  Nanocrystalline Fe88−2xCoxNixZr7B4Cu1 alloys: Soft magnets for vehicle electrification technologies (invited) , 2015 .

[26]  Jijun Zhang,et al.  Development of Fe-based bulk metallic glasses with high saturation magnetization , 2014 .

[27]  Christina H. Chen,et al.  Magnetic Materials and Devices for the 21st Century: Stronger, Lighter, and More Energy Efficient , 2011, Advanced materials.

[28]  N. Popa,et al.  Controlled manufacturing of nanoparticles by the laser pyrolysis: Application to cementite iron carbide , 2009 .

[29]  Ronald L. Boring,et al.  Frontiers of Engineering: Reports on Leading-Edge Engineering from the 2008 Symposium , 2009 .

[30]  M. Eroglu,et al.  Boride coatings on steel using shielded metal arc welding electrode: Microstructure and hardness , 2009 .

[31]  P. Srinivasan,et al.  Optimization of process parameters for deposition of Stellite on X45CrSi93 steel by plasma transferred arc technique , 2008 .

[32]  F. Rumiche,et al.  Assessment of the Effect of Microstructure on the Magnetic Behavior of Structural Carbon Steels Using an Electromagnetic Sensor , 2008, Journal of Materials Engineering and Performance.

[33]  Thomas Sourmail,et al.  Near equiatomic FeCo alloys: Constitution, mechanical and magnetic properties , 2005 .

[34]  Y. Houbaert,et al.  On the Influence of Order on the Soft Magnetic Properties of Fe‐Si Alloys , 2005 .

[35]  O. Tsagareishvili,et al.  Neutron-absorption deformable boron-rich ferrous alloys , 2004 .

[36]  John Q. Xiao,et al.  High temperature soft magnetic materials: feco alloys and composites , 2000 .