USE OF X-RAY COMPUTED MICROTOMOGRAPHY TO UNDERSTAND WHY GELS REDUCE RELATIVE PERMEABILITY TO WATER MORE THAN THAT TO OIL

Abstract X-ray computed microtomography (XMT) was used to investigate why gels reduce relative permeability to water more than that to oil in strongly water-wet Berea sandstone. XMT allows saturation differences to be monitored for individual pores during various stages of oil, water, and gelant flooding. The method also characterizes distributions of pore size, aspect ratio, and coordination number for the porous media. We studied a Cr(III) acetate–HPAM gel that reduced permeability to water (at Sor) by a factor 80–90 times more than that to oil (at Swr). In Berea, the gel caused disproportionate permeability reduction by trapping substantial volumes of oil that remained immobile during water flooding (i.e., 43.5% Sor before gel placement versus 78.7% Sor after gel placement). With this high trapped oil saturation, water was forced to flow through narrow films, through the smallest pores, and through the gel itself. In contrast, during oil flooding, oil pathways remained relatively free from constriction by the gel.

[1]  W. E. Soll,et al.  Wettability and rate effects on immiscible displacement: Lattice Boltzmann simulation in microtomographic images of reservoir rocks , 1998 .

[2]  G. Willhite,et al.  Mechanisms Causing Disproportionate Permeability Reduction in Porous Media Treated With Chromium Acetate/HPAM Gels , 2002 .

[3]  Randall S. Seright,et al.  USING CHEMICALS TO OPTIMIZE CONFORMANCE CONTROL IN FRACTURED RESERVOIRS Final and Third Annual Technical Progress Report , 2001 .

[4]  Randall S. Seright,et al.  Using Chemicals to Optimize Conformance Control in Fractured Reservoirs , 2001 .

[5]  Randall S. Seright,et al.  Reduction of Oil and Water Permeabilities Using Gels , 1992 .

[6]  W. E. Soll,et al.  Developments in Synchrotron X-Ray Microtomography with Applications to Flow in Porous Media , 1996 .

[7]  Hamed Hamoud Al-Sharji,et al.  Pore-Scale Study of the Flow of Oil and Water through Polymer Gels , 1999 .

[8]  Randall S. Seright,et al.  Gel Placement in Production Wells , 1993 .

[9]  W. E. Soll,et al.  Pore level imaging of fluid transport using synchrotron X-ray microtomography , 1996 .

[10]  J. Dunsmuir,et al.  Irreducible water distribution in sandstone rock: Two phase flow simulations in CT-based pore network , 2000 .

[11]  R. Seright.  Improved techniques for fluid diversion in oil recovery. Final report , 1996 .

[12]  J. H. Dunsmuir,et al.  X-Ray Microtomography: A New Tool for the Characterization of Porous Media , 1991 .

[13]  Ioannis Chatzis,et al.  Comprehensive Pore Structure Characterization Using 3D Computer Reconstruction and Stochastic Modeling , 1997 .

[14]  B. Flannery,et al.  Three-Dimensional X-ray Microtomography , 1987, Science.

[15]  Randall S. Seright,et al.  Why do gels reduce water permeability more than oil permeability , 1995 .

[16]  Alain Zaitoun,et al.  Two-Phase Flow Property Modifications by Polymer Adsorption , 1998 .

[17]  G. Willhite,et al.  Mechanisms Causing Disproportionate Permeability in Porous Media Treated With Chromium Acetate/HPAAM Gels , 2000 .

[18]  Norbert Kohler,et al.  Thin Polyacrylamide Gels for Water Control in High-Permeability Production Wells , 1991 .