Smart manufacturing: Past research, present findings, and future directions

Today, the manufacturing industry is aiming to improve competitiveness through the convergence with cutting-edge ICT technologies in order to secure a new growth engine. Smart Manufacturing, which is the fourth revolution in the manufacturing industry and is also considered as a new paradigm, is the collection of cutting-edge technologies that support effective and accurate engineering decision-making in real time through the introduction of various ICT technologies and the convergence with the existing manufacturing technologies. This paper surveyed and analyzed various articles related to Smart Manufacturing, identified the past and present levels, and predicted the future. For these purposes, 1) the major key technologies related to Smart Manufacturing were identified through the analysis of the policies and technology roadmaps of Germany, the U.S., and Korea that have government-driven leading movements for Smart Manufacturing, 2) the related articles on the overall Smart Manufacturing concept, the key system structure, or each key technology were investigated, and, finally, 3) the Smart Manufacturing-related trends were identified and the future was predicted by conducting various analyses on the application areas and technology development levels that have been addressed in each article.

[1]  Peter Butala,et al.  DISTRIBUTED MANUFACTURING SYSTEMS AND THE INTERNET OF THINGS: A CASE STUDY , 2013 .

[2]  Shahin Rahimifard,et al.  A framework for modelling energy consumption within manufacturing systems , 2011 .

[3]  Paul K. Wright,et al.  Condition Monitoring in End-Milling Using Wireless Sensor Networks (WSNs) , 2008 .

[4]  Detlef Zühlke,et al.  SmartFactory - Towards a factory-of-things , 2010, Annu. Rev. Control..

[5]  Yang Li,et al.  Towards a Framework for Assuring Cyber Physical System Security , 2015 .

[6]  Christoph Herrmann,et al.  Process chain simulation to foster energy efficiency in manufacturing , 2009 .

[7]  Florian Niebling,et al.  Modelling complex and flexible processes for smart cyber-physical environments , 2013, J. Comput. Sci..

[8]  Shahin Rahimifard,et al.  Minimising Embodied Product Energy to support energy efficient manufacturing , 2010 .

[9]  Chuan Zhang,et al.  A Reconfigurable Smart Sensor Interface for Industrial WSN in IoT Environment , 2014, IEEE Transactions on Industrial Informatics.

[10]  Oliver Niggemann,et al.  Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control , 2015, DX.

[11]  László Monostori,et al.  ScienceDirect Variety Management in Manufacturing . Proceedings of the 47 th CIRP Conference on Manufacturing Systems Cyber-physical production systems : Roots , expectations and R & D challenges , 2014 .

[12]  Kaufui Wong,et al.  A Review of Additive Manufacturing , 2012 .

[13]  Marcel Bogers,et al.  on Intelligent Manufacturing and Automation , 2013 The Smart Factory : Exploring Adaptive and Flexible Manufacturing Solutions , 2014 .

[14]  Robert Harrison,et al.  Industrial Cloud-Based Cyber-Physical Systems: The IMC-AESOP Approach , 2014 .

[15]  Sami Kara,et al.  Towards Energy and Resource Efficient Manufacturing: A Processes and Systems Approach , 2012 .

[16]  Jean-Yves Hascoët,et al.  A new DFM approach to combine machining and additive manufacturing , 2011, ArXiv.

[17]  Lei Ren,et al.  Cloud manufacturing: key characteristics and applications , 2017, Int. J. Comput. Integr. Manuf..

[18]  Ting Qu,et al.  Agent-based smart objects management system for real-time ubiquitous manufacturing , 2011 .

[19]  Christoph Herrmann,et al.  Energy oriented simulation of manufacturing systems - Concept and application , 2011 .

[20]  Malte Brettel,et al.  How Virtualization, Decentralization and Network Building Change the Manufacturing Landscape: An Industry 4.0 Perspective , 2014 .

[21]  Sang Do Noh,et al.  A diagnosis and evaluation method for strategic planning and systematic design of a virtual factory in smart manufacturing systems , 2015 .

[22]  Béla Genge,et al.  Analyzing Cyber-Physical Attacks on Networked Industrial Control Systems , 2011, Critical Infrastructure Protection.

[23]  Sudarsan Rachuri,et al.  Predictive Analytics Model for Power Consumption in Manufacturing , 2014 .

[24]  Bernhard Mitschang,et al.  Data Mining-driven Manufacturing Process Optimization , 2012 .

[25]  Ryan B. Wicker,et al.  3D Printing multifunctionality: structures with electronics , 2014 .

[26]  Yingfeng Zhang,et al.  Real-time information capturing and integration framework of the internet of manufacturing things , 2015, Int. J. Comput. Integr. Manuf..

[27]  Paulo E. Miyagi,et al.  Service Composition in the Cloud-Based Manufacturing Focused on the Industry 4.0 , 2015, DoCEIS.

[28]  Duck Bong Kim,et al.  Decision guidance methodology for sustainable manufacturing using process analytics formalism , 2017, J. Intell. Manuf..

[29]  Helmut Zaiser,et al.  Competences for Cyber-physical Systems in Manufacturing – First Findings and Scenarios , 2014 .

[30]  Dazhong Wu,et al.  Cloud Manufacturing: Drivers, Current Status, and Future Trends , 2013 .

[31]  Gad Rabinowitz,et al.  Cycle-Time Key Factor Identification and Prediction in Semiconductor Manufacturing Using Machine Learning and Data Mining , 2011, IEEE Transactions on Semiconductor Manufacturing.

[32]  Wu He,et al.  Internet of Things in Industries: A Survey , 2014, IEEE Transactions on Industrial Informatics.

[33]  Athulan Vijayaraghavan,et al.  Automated energy monitoring of machine tools , 2010 .

[34]  Ting Qu,et al.  Agent-based Smart Gateway for RFID-enabled real-time wireless manufacturing , 2011 .

[35]  Lihui Wang,et al.  Machine availability monitoring and machining process planning towards Cloud manufacturing , 2013 .

[36]  Jay Lee,et al.  Service Innovation and Smart Analytics for Industry 4.0 and Big Data Environment , 2014 .

[37]  Hyun-Suk Hwang,et al.  Design and Implementation of Wireless Sensor Based-Monitoring System for Smart Factory , 2007, ICCSA.

[38]  Jing-Bing Zhang,et al.  The wireless sensor networks for factory automation: Issues and challenges , 2007, 2007 IEEE Conference on Emerging Technologies and Factory Automation (EFTA 2007).

[39]  Ian Campbell,et al.  Additive manufacturing: rapid prototyping comes of age , 2012 .

[40]  Adriano Regis,et al.  Integrated Manufacturing Management using Internet of Things , 2012 .

[41]  Cebrail Çiflikli,et al.  Implementing a data mining solution for enhancing carpet manufacturing productivity , 2010, Knowl. Based Syst..

[42]  Wu He,et al.  A state-of-the-art survey of cloud manufacturing , 2015, Int. J. Comput. Integr. Manuf..

[43]  T. Kramp,et al.  Introduction to the Internet of Things , 2013 .

[44]  Jay Lee,et al.  A Cyber-Physical Systems architecture for Industry 4.0-based manufacturing systems , 2015 .

[45]  Stamatis Karnouskos,et al.  Towards the Next Generation of Industrial Cyber-Physical Systems , 2014 .

[46]  Liang Hou,et al.  Additive manufacturing and its societal impact: a literature review , 2013 .

[47]  Janet M. Twomey,et al.  Operational methods for minimization of energy consumption of manufacturing equipment , 2007 .

[48]  Fei Tao,et al.  IoT-Based Intelligent Perception and Access of Manufacturing Resource Toward Cloud Manufacturing , 2014, IEEE Transactions on Industrial Informatics.

[49]  Dazhong Wu,et al.  Cloud-based design and manufacturing: A new paradigm in digital manufacturing and design innovation , 2015, Comput. Aided Des..

[50]  Sholom M. Weiss,et al.  IBM Research Report Data Analytics and Stochastic Modeling in a Semiconductor Fab , 2009 .

[51]  Fei Tao,et al.  CCIoT-CMfg: Cloud Computing and Internet of Things-Based Cloud Manufacturing Service System , 2014, IEEE Transactions on Industrial Informatics.

[52]  Jay Lee,et al.  Recent advances and trends in predictive manufacturing systems in big data environment , 2013 .

[53]  Andrew Y. C. Nee,et al.  Augmented reality applications in design and manufacturing , 2012 .

[54]  Friedemann Mattern,et al.  From the Internet of Computers to the Internet of Things , 2010, From Active Data Management to Event-Based Systems and More.

[55]  Jiafu Wan,et al.  Implementing Smart Factory of Industrie 4.0: An Outlook , 2016, Int. J. Distributed Sens. Networks.

[56]  Barry Berman,et al.  3D printing: the new industrial revolution , 2012, IEEE Engineering Management Review.

[57]  Chi-Guhn Lee,et al.  Manufacturing task semantic modeling and description in cloud manufacturing system , 2014 .

[58]  Feng Xia,et al.  From machine-to-machine communications towards cyber-physical systems , 2013, Comput. Sci. Inf. Syst..

[59]  Dazhong Wu,et al.  Cloud-Based Design and Manufacturing: Status and Promise , 2014 .

[60]  Lei Ren,et al.  Cloud manufacturing: from concept to practice , 2015, Enterp. Inf. Syst..

[61]  Dazhong Wu,et al.  Cloud-Based Manufacturing: Old Wine in New Bottles? , 2014 .

[62]  Carmen Constantinescu,et al.  Smart Factory - A Step towards the Next Generation of Manufacturing , 2008 .

[63]  Muhammad Ashraf Shaheen,et al.  Data Mining Methodology in Perspective of Manufacturing Databases , 2010 .

[64]  Paul Witherell,et al.  Toward Metamodels for Composable and Reusable Additive Manufacturing Process Models , 2014 .

[65]  Yutaka Hata,et al.  Simplified Factory Energy Management System based on operational condition estimation by sensor data , 2012, 2012 IEEE International Conference on Automation Science and Engineering (CASE).

[66]  Fei Tao,et al.  A study of optimal allocation of computing resources in cloud manufacturing systems , 2012, The International Journal of Advanced Manufacturing Technology.

[67]  Reiner Anderl,et al.  Industrie 4.0 - Advanced Engineering of Smart Products and Smart Production , 2014 .

[68]  M. Blanchet,et al.  Industrie 4.0: the new industrial revolution. How Europe will succeed , 2014 .

[69]  Günther Seliger,et al.  Methodology for planning and operating energy-efficient production systems , 2011 .

[70]  Daniele Marioli,et al.  Wired and wireless sensor networks for industrial applications , 2009, Microelectron. J..

[71]  Lei Ren,et al.  Cloud manufacturing: a new manufacturing paradigm , 2014, Enterp. Inf. Syst..

[72]  Ian F. Akyildiz,et al.  Wireless sensor networks , 2007 .

[73]  Vlad Trifa,et al.  Interacting with the SOA-Based Internet of Things: Discovery, Query, Selection, and On-Demand Provisioning of Web Services , 2010, IEEE Transactions on Services Computing.

[74]  Sang Do Noh,et al.  Digital Manufacturing in Smart Manufacturing Systems: Contribution, Barriers, and Future Directions , 2015, APMS.

[75]  Gerd Kortuem,et al.  Sensor Networks or Smart Artifacts? An Exploration of Organizational Issues of an Industrial Health and Safety Monitoring System , 2007, UbiComp.

[76]  Alexandre Dolgui,et al.  A dynamic model and an algorithm for short-term supply chain scheduling in the smart factory industry 4.0 , 2016 .

[77]  Cenk Undey,et al.  Applied advanced process analytics in biopharmaceutical manufacturing: Challenges and prospects in real-time monitoring and control , 2010 .

[78]  Lida Xu,et al.  Internet of Things for Enterprise Systems of Modern Manufacturing , 2014, IEEE Transactions on Industrial Informatics.

[79]  Lei Ren,et al.  A modeling and description method of multidimensional information for manufacturing capability in cloud manufacturing system , 2013 .

[80]  Ray Y. Zhong,et al.  Visualization of RFID-enabled shopfloor logistics Big Data in Cloud Manufacturing , 2015, The International Journal of Advanced Manufacturing Technology.

[81]  J. Delsing,et al.  A SOA-based architecture for empowering future collaborative cloud-based industrial automation , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.

[82]  Dazhong Wu,et al.  Cloud manufacturing: Strategic vision and state-of-the-art☆ , 2013 .

[83]  Paul Witherell,et al.  TOWARDS AN INTEGRATED DATA SCHEMA DESIGN FOR ADDITIVE MANUFACTURING: CONCEPTUAL MODELING , 2015 .

[84]  Peter Friess,et al.  Internet of Things: Converging Technologies for Smart Environments and Integrated Ecosystems , 2013 .