论文信息 - Effect of surface orientation on the tribological properties of laser sintered polyamide 12

Effect of surface orientation on the tribological properties of laser sintered polyamide 12

Abstract Experiments have been carried out to determine the tribological properties of laser sintered polyamide 12 (PA12). The effect of surface orientation on the wear properties was studied, which showed anisotropic behaviour. Laser sintered specimens were polished to achieve better surface finish for the wear tests. Tribological testing results showed that the wear resistance was greater and the coefficient of friction was smaller for the side surfaces as compared to the top surfaces. Experimental details and possible reasons for the results obtained are further discussed in the paper.

[1] Neil Hopkinson,et al. Rapid manufacturing : an industrial revolution for the digital age , 2006 .

[2] S. Ge,et al. Investigation of the influence of MoS2 filler on the tribological properties of carbon fiber reinforced nylon 1010 composites , 2003 .

[3] Chee Kai Chua,et al. 3D printing and additive manufacturing : principles and applications , 2015 .

[4] S. Sangal,et al. On the optical microscopic method for the determination of ball-on-flat surface linearly reciprocating sliding wear volume , 2013 .

[5] Mo Song,et al. Improving the mechanical properties of laser-sintered polyamide 12 through incorporation of carbon nanotubes , 2013 .

[6] David W. Rosen,et al. Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .

[7] R. Hague,et al. Laser sintering of polyamides and other polymers , 2012 .

[8] Paul Sas,et al. Microstructural characterization of SLS-PA12 specimens under dynamic tension/compression excitation , 2010 .

[9] Mo Song,et al. Influence of carbon nanotubes on the rheology and dynamic mechanical properties of polyamide-12 for laser sintering , 2014 .