Nonlocal problems in MEMS device control

Perhaps the most ubiquitous phenomena associated with electrostatically actuated MEMS devices is the `pull-in' voltage instability. In this instability, when applied voltages are increased beyond a certain critical voltage there is no longer a steady-state configuration of the device where mechanical members remain separate. This instability severely restricts the range of stable operation of many devices. Here, a mathematical model of an idealized electrostatically actuated MEMS device is constructed for the purpose of analyzing various schemes proposed for the control of the pull-in instability. This embedding of a device into a control circuit gives rise to a nonlinear and nonlocal elliptic problem which is analyzed through a variety of asymptotic, analytical, and numerical techniques. The pull-in voltage instability is characterized in terms of the bifurcation diagram for the mathematical model. Variations in various capacitive control schemes are shown to give rise to variations in the bifurcation diagram and hence to effect the pull-in voltage and pull-in distance.

[1]  H. Blasius.  Grenzschichten in Flüssigkeiten mit kleiner Reibung , 1907 .

[2]  S. Timoshenko,et al.  THEORY OF PLATES AND SHELLS , 1959 .

[3]  S. Ramo,et al.  Fields and Waves in Communication Electronics , 1966 .

[4]  H. Nathanson,et al.  The resonant gate transistor , 1967 .

[5]  Roger F. Harrington,et al.  Field computation by moment methods , 1968 .

[6]  S. B. Crary,et al.  Analysis And Simulation Of MOS CapacitorFeedback For Stabilizing Electrostatically ActuatedMechanical Devices , 1970 .

[7]  I. Stakgold.  Green's Functions and Boundary Value Problems , 1979 .

[8]  T. Y. Na,et al.  Computational methods in engineering boundary value problems , 1979 .

[9]  Christian A. Ringhofer,et al.  Computation of Current-Voltage Characteristics in a Semiconductor Device using Arc-length Continuation , 1983 .

[10]  H. Keller,et al.  A multigrid continuation method for elliptic problems with folds , 1986 .

[11]  William S. N. Trimmer,et al.  Microrobots and micromechanical systems , 1989 .

[12]  Jerrold Bebernes,et al.  Mathematical Problems from Combustion Theory , 1989 .

[13]  Calculation of the leading corrections to the capacitor capacitance between two conductors separated by a small gap , 1990 .

[14]  Jacob K. White,et al.  A computer-aided design system for microelectromechanical systems (MEMCAD) , 1992 .

[15]  Harrie A.C. Tilmans,et al.  Static and dynamic aspects of an air-gap capacitor , 1992 .

[16]  C. Hsu,et al.  Mechanical stability and adhesion of microstructures under capillary forces. I. Basic theory , 1993 .

[17]  Ieee Antennas,et al.  Electromagnetics: History, Theory, and Applications , 1993 .

[18]  Kristofer S. J. Pister,et al.  Analysis of closed-loop control of parallel-plate electrostatic microgrippers , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[19]  A HEURISTIC APPROACH TO THE ELECTROMECHANICAL MODELNG OF MEMS BEAMS , 1994 .

[20]  H. Tilmans,et al.  Electrostatically driven vacuum-encapsulated polysilicon resonators part II. theory and performance , 1994 .

[21]  D. Bloom.  Grating light valves for high resolution displays , 1994, Proceedings of 1994 IEEE International Electron Devices Meeting.

[22]  Andrew Alfred Lacey,et al.  Thermal runaway in a non-local problem modelling Ohmic heating: Part I: Model derivation and some special cases , 1995, European Journal of Applied Mathematics.

[23]  Michael J. Anderson,et al.  BROADBAND ELECTROSTATIC TRANSDUCERS : MODELING AND EXPERIMENTS , 1995 .

[24]  Subrata Mukherjee,et al.  Simulation methods for micro-electro-mechanical structures (MEMS) with application to a microtweezer , 1995 .

[25]  A. Lacey.  Thermal runaway in a non-local problem modelling Ohmic heating. Part II: General proof of blow-up and asymptotics of runaway , 1995, European Journal of Applied Mathematics.

[26]  G. K. Ananthasuresh,et al.  3D modeling of contact problems and hysteresis in coupled electro-mechanics , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[27]  A. Dec,et al.  Micromachined varactor with wide tuning range , 1997 .

[28]  David Graham Moodie,et al.  Optical-TDMA channel selection using electroabsorption modulator with dual frequency drive , 1997 .

[29]  Narayan R. Aluru,et al.  Algorithms for coupled domain MEMS simulation , 1997, DAC.

[30]  Jan G. Korvink,et al.  SOLIDIS: a tool for microactuator simulation in 3-D , 1997 .

[31]  J. Seeger,et al.  Stabilization of electrostatically actuated mechanical devices , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[32]  Jacob K. White,et al.  Simulating the behavior of MEMS devices: computational methods and needs , 1997 .

[33]  J. Carrillo.  On a nonlocal elliptic equation with decreasing nonlinearity arising in plasma physics and heat conduction , 1998 .

[34]  Olivier Français,et al.  Dynamic simulation of an electrostatic micropump with pull-in and hysteresis phenomena , 1998 .

[35]  Miko Elwenspoek,et al.  Modeling, design and testing of the electrostatic shuffle motor , 1998 .

[36]  B. E. Alaca,et al.  Analytical modeling of electrostatic membrane actuator for micro pumps , 1999 .

[37]  Robert W. Dutton,et al.  Effects of capacitors, resistors, and residual charges on the static and dynamic performance of electrostatically actuated devices , 1999, Design, Test, Integration, and Packaging of MEMS/MOEMS.

[38]  Wensyang Hsu,et al.  A two-way membrane-type micro-actuator with continuous deflections , 2000 .

[39]  Olivier Français,et al.  Enhancement of elementary displaced volume with electrostatically actuated diaphragms: application to electrostatic micropumps , 2000 .

[40]  William H. Press,et al.  Numerical recipes in C , 2002 .

[41]  Yousef Saad,et al.  Iterative methods for sparse linear systems , 2003 .