Assessment and design of industrial manual handling to reduce physical ergonomics hazards : – use and development of assessment tools
暂无分享,去创建一个
[1] H Sakakibara,et al. Overhead work and shoulder-neck pain in orchard farmers harvesting pears and apples. , 1995, Ergonomics.
[2] Patrick G. Dempsey,et al. Revisited: Comparison of two techniques to establish maximum acceptable forces of dynamic pushing for male industrial workers , 2004 .
[3] K Teschke,et al. Development and evaluation of an observational Back-Exposure Sampling Tool (Back-EST) for work-related back injury risk factors. , 2009, Applied ergonomics.
[4] Kermit Davis,et al. Characteristics of job rotation in the Midwest US manufacturing sector , 2005, Ergonomics.
[5] Vincent M. Ciriello,et al. The effects of box size, vertical distance, and height on lowering tasks , 2001 .
[6] J. Winkel,et al. Occupational and individual risk factors for shoulder-neck complaints: Part II — The scientific basis (literature review) for the guide , 1992 .
[7] Simon Dagenais,et al. Causal assessment of occupational bending or twisting and low back pain: results of a systematic review. , 2010, The spine journal : official journal of the North American Spine Society.
[8] Tzu-Hsien Lee. Psychophysically determined asymmetrical lifting capabilities for different frequencies and containers. , 2005, Industrial health.
[9] Simon Dagenais,et al. Causal assessment of occupational lifting and low back pain: results of a systematic review. , 2010, The spine journal : official journal of the North American Spine Society.
[10] Robert J. Marley,et al. Isokinetic strength characteristics in wrist flexion and extension , 2000 .
[11] R. Norman,et al. Shear Happens! Suggested guidelines for ergonomists to reduce the risk of low back injury from shear loading , 1998 .
[12] G Wickström,et al. Strain on the back in concrete reinforcement work. , 1985, British journal of industrial medicine.
[13] Alex Burdorf,et al. Modelling the effects of exposure to whole-body vibration on low-back pain and its long-term consequences for sickness absence and associated work disability , 2006 .
[14] G. David. Ergonomic methods for assessing exposure to risk factors for work-related musculoskeletal disorders. , 2005, Occupational medicine.
[15] T.Y. Yen,et al. A video-based system for acquiring biomechanical data synchronized with arbitrary events and activities , 1995, IEEE Transactions on Biomedical Engineering.
[16] V Louhevaara,et al. Physiological strain during kitchen work in relation to maximal and task-specific peak values. , 1999, Ergonomics.
[17] Eira Viikari-Juntura,et al. A population study on differences in the determinants of a specific shoulder disorder versus nonspecific shoulder pain without clinical findings. , 2005, American journal of epidemiology.
[18] A. Garg,et al. The Strain Index: a proposed method to analyze jobs for risk of distal upper extremity disorders. , 1995, American Industrial Hygiene Association journal.
[19] L. Forcier,et al. Work related musculoskeletal disorders (WMSDs) : a reference book for prevention , 1995 .
[20] A Garg,et al. Revised NIOSH equation for the design and evaluation of manual lifting tasks. , 1993, Ergonomics.
[21] M. Frings-Dresen,et al. Definition and assessment of specific occupational demands concerning lifting, pushing, and pulling based on a systematic literature search , 2002, Occupational and environmental medicine.
[22] L. Jensen. Knee osteoarthritis: influence of work involving heavy lifting, kneeling, climbing stairs or ladders, or kneeling/squatting combined with heavy lifting , 2007, Occupational and Environmental Medicine.
[23] Swei-Pi Wu. Maximum acceptable weights for asymmetric lifting of Chinese females. , 2003, Applied ergonomics.
[24] P G Dempsey,et al. Influence of measurement accuracy on the application of the 1991 NIOSH equation. , 2001, Applied ergonomics.
[25] Veikko Louhevaara,et al. Dynamic work assessment , 2005 .
[26] Svend Erik Mathiassen,et al. Fysisk variation och belastningsbesvär i arbetet , 2016 .
[27] T R Waters,et al. Accuracy of measurements for the revised NIOSH lifting equation. National Institute for Occupational Safety and Health. , 1998, Applied ergonomics.
[28] Karlheinz Schaub,et al. Load on the lumbar spine of flight attendants during pushing and pulling trolleys aboard aircraft , 2007 .
[29] Peter A. Hancock,et al. Hedonomics: The Power of Positive and Pleasurable Ergonomics , 2005 .
[30] M K Mattila,et al. Job load and hazard analysis: a method for the analysis of workplace conditions for occupational health care. , 1985, British journal of industrial medicine.
[31] Svend Erik Mathiassen,et al. Cost-efficient measurement strategies for posture observations based on video recordings. , 2013, Applied ergonomics.
[32] Thomas R. Waters,et al. Efficacy of the Revised NIOSH Lifting Equation to Predict Risk of Low-Back Pain Associated With Manual Lifting , 2014, Hum. Factors.
[33] J. R. Landis,et al. The measurement of observer agreement for categorical data. , 1977, Biometrics.
[34] A Magora,et al. Investigation of the relation between low back pain and occupation. 3. Physical requirements: sitting, standing and weight lifting. , 1972, IMS, Industrial medicine and surgery.
[35] Vincent M Ciriello,et al. Oxygen consumption prediction models for individual and combination materials handling tasks , 2008, Ergonomics.
[36] Jörgen Eklund,et al. Arbetsmiljöarbete med företagsbaserade modeller : Effekter av belastningsergonomiska insatser , 2007 .
[37] Albert Nienhaus,et al. Association between work-related biomechanical risk factors and the occurrence of carpal tunnel syndrome: an overview of systematic reviews and a meta-analysis of current research , 2015, BMC Musculoskeletal Disorders.
[38] A. Mital,et al. Human muscle strength definitions, measurement, and usage: Part I – Guidelines for the practitioner , 1998 .
[39] Alex Burdorf,et al. Associations between work-related factors and specific disorders of the shoulder--a systematic review of the literature. , 2010, Scandinavian journal of work, environment & health.
[40] W S Marras,et al. Prospective validation of a low-back disorder risk model and assessment of ergonomic interventions associated with manual materials handling tasks , 2000, Ergonomics.
[41] S P Wu,et al. Psychophysical determination of load carrying capacity for a 1-h work period by Chinese males , 2001, Ergonomics.
[42] Waldemar Karwowski,et al. ERGO_X — The Model of a Fuzzy Expert System for Workstation Ergonomic Analysis , 2006 .
[43] P Harber,et al. The ergonomic challenge of repetitive motion with varying ergonomic stresses. Characterizing supermarket checking work. , 1992, Journal of occupational medicine. : official publication of the Industrial Medical Association.
[44] Paulien M Bongers,et al. Are psychosocial factors, risk factors for symptoms and signs of the shoulder, elbow, or hand/wrist?: A review of the epidemiological literature. , 2002, American journal of industrial medicine.
[45] W. Green,et al. Pleasure with Products: Human Factors for Body, Mind and Soul , 1999 .
[46] S H Snook,et al. Maximum weights and work loads acceptable to male industrial workers. A study of lifting, lowering, pushing, pulling, carrying, and walking tasks. , 1970, American Industrial Hygiene Association journal.
[47] Jay Kapellusch,et al. The Revised Strain Index: an improved upper extremity exposure assessment model , 2017, Ergonomics.
[48] Roland Kadefors,et al. Ergonomic evaluation of complex work: a participative approach employing video–computer interaction, exemplified in a study of order picking , 2000 .
[49] Swapnesh C. Patel,et al. Relative advantage of portable computer-based workcards for aircraft inspection , 2000 .
[50] W Karwowski,et al. A comprehensive lifting model: beyond the NIOSH lifting equation. , 1997, Ergonomics.
[51] Stefan Pinzke. A computerised system for analysing working postures in agriculture , 1994 .
[52] Monique H. W. Frings-Dresen,et al. Epidemiologic evidence on manual materials handling as a risk factor for back disorders:a systematic review , 1999 .
[53] A. B. Hill,et al. "The Environment and Disease: Association or Causation?" (1965), by Austin Bradford Hill , 2017 .
[54] Anna Ivarsson,et al. The relationship between physical workload and quality within line-based assembly , 2016, Ergonomics.
[55] Anders Fuglsang-Frederiksen,et al. Reversible median nerve impairment after three weeks of repetitive work. , 2017, Scandinavian journal of work, environment & health.
[56] W Karwowski,et al. LUBA: an assessment technique for postural loading on the upper body based on joint motion discomfort and maximum holding time. , 2001, Applied ergonomics.
[57] Waldemar Karwowski,et al. Theoretical and experimental evaluation of the multiplicative lifting equation and the general lifting index , 2006 .
[58] Marjolein Douwes,et al. New risk assessment tools in The Netherlands. , 2012, Work.
[59] David M. Andrews,et al. Acceptable peak forces and impulses during manual hose insertions in the automobile industry , 2008 .
[60] Falk Liebers,et al. The Key Indicator Method for Manual Handling Operations (KIM-MHO) - evaluation of a new method for the assessment of working conditions within a cross-sectional study , 2010, BMC musculoskeletal disorders.
[61] Waldemar Karwowski,et al. Work-Related Musculoskeletal Disorders (WMSD): General Issues , 2006 .
[62] Jörgen Winkel,et al. Validity of self-reported exposures to work postures and manual materials handling , 1993 .
[63] A. Freivalds,et al. Development of a cumulative trauma disorder risk assessment model for the upper extremities , 1999 .
[64] Anil Mital,et al. HUMAN MUSCLE STRENGTH DEFINITIONS, MEASUREMENT, AND USAGE : PART II - THE SCIENTIFIC BASIS (KNOWLEDGE BASE) FOR THE GUIDE , 1998 .
[65] Yang Gao,et al. Physiological and perceptual responses in male Chinese workers performing combined manual materials handling tasks , 2009 .
[66] Clark R Dickerson,et al. Relationships between psychophysically acceptable and maximum voluntary hand force capacity in the context of underlying biomechanical limitations. , 2012, Applied ergonomics.
[67] V. H. Hildebrandt,et al. Psychosocial factors at work and musculoskeletal disease. , 1993, Scandinavian journal of work, environment & health.
[68] T J Armstrong,et al. Investigation of cumulative trauma disorders in a poultry processing plant. , 1982, American Industrial Hygiene Association journal.
[69] W Karwowski,et al. Comprehensive manual handling limits for lowering, pushing, pulling and carrying activities. , 1997, Ergonomics.
[70] J A Eklund,et al. Relationships between ergonomics and quality in assembly work. , 1995, Applied ergonomics.
[71] Patrick G. Dempsey,et al. Gender differences in psychophysically determined maximum acceptable weights and forces for industrial workers observed after twenty years , 2011, International archives of occupational and environmental health.
[72] H J Wilke,et al. Multiple muscle force simulation in axial rotation of the cervical spine. , 1999, Clinical biomechanics.
[73] Jim R. Potvin. Comparing the revised NIOSH lifting equation to the psychophysical, biomechanical and physiological criteria used in its development , 2014 .
[74] K P Granata,et al. Relation between spinal load factors and the high-risk probability of occupational low-back disorder. , 1999, Ergonomics.
[75] D. Cole,et al. Effectiveness of participatory ergonomic interventions on health outcomes: a systematic review. , 2008, Applied ergonomics.
[76] T Nakagawa,et al. Relation between overhead work and complaints of pear and apple orchard workers. , 1987, Ergonomics.
[77] L Punnett,et al. PATH: a work sampling-based approach to ergonomic job analysis for construction and other non-repetitive work. , 1996, Applied ergonomics.
[78] Jeffrey E. Fernandez,et al. The development and application of psychophysical methods in upper-extremity work tasks and task elements , 2014 .
[79] Kristina Eliasson,et al. Occupational health services in the prevention of musculoskeletal disorders : Processes, tools and organizational aspects , 2017 .
[80] P. Vink,et al. ERGOtool for the integral improvement of ergonomics and process flow in assembly , 2002 .
[81] S H Snook,et al. Maximum acceptable forces for repetitive ulnar deviation of the wrist. , 1997, American Industrial Hygiene Association journal.
[82] E. Viikari-Juntura,et al. Validity of self-reported physical work load in epidemiologic studies on musculoskeletal disorders. , 1996, Scandinavian journal of work, environment & health.
[83] Liz Ashby,et al. Evaluation in industry of a draft code of practice for manual handling. , 2004, Applied ergonomics.
[84] Rammohan V. Maikala,et al. Maximal Acceptable Torques of Six Highly Repetitive Hand-Wrist Motions for Male Industrial Workers , 2013, Hum. Factors.
[85] A. J. van der Beek,et al. Does musculoskeletal discomfort at work predict future musculoskeletal pain? , 2008, Ergonomics.
[86] Krzysztof Swat,et al. ERGONOM: Computer-aided working posture analysis system for workplace designers , 1996 .
[87] Waldemar Karwowski,et al. Ranking systems for evaluation of joint and joint motion stressfulness based on perceived discomforts. , 2003, Applied ergonomics.
[88] N. Fallentin,et al. Evaluation of Physical Workload Standards/Guidelines from a Nordic Perspective , 2000, Scandinavian journal of work, environment & health.
[89] W. Patrick Neumann,et al. The accuracy of self-report and trained observer methods for obtaining estimates of peak load information during industrial work , 1997 .
[90] Paul H.P. Yeow,et al. Proving external validity of ergonomics and quality relationship through review of real-world case studies , 2011 .
[91] B. Kwon,et al. Causal assessment of awkward occupational postures and low back pain: results of a systematic review. , 2010, The spine journal : official journal of the North American Spine Society.
[92] Jack P. Callaghan,et al. Errors associated with bin boundaries in observation-based posture assessment methods , 2008 .
[93] Jeffrey C. Woldstad,et al. Models in Manual Materials Handling , 1999 .
[94] Silvia A. Pascual,et al. An Investigation of Ergonomics Analysis Tools Used in Industry in the Identification of Work-Related Musculoskeletal Disorders , 2008, International journal of occupational safety and ergonomics : JOSE.
[95] S H Snook,et al. The effects of heat stress on manual handling tasks. , 1974, American Industrial Hygiene Association journal.
[96] Vincent M Ciriello,et al. Dynamic pushing on three frictional surfaces: maximum acceptable forces, cardiopulmonary and calf muscle metabolic responses in healthy men , 2009, Ergonomics.
[97] L M Straker,et al. A comparison of risk assessment of single and combination manual handling tasks: 1. maximum acceptable weight measures. , 1996, Ergonomics.
[98] Amaresh Chakrabarti,et al. A design research methodology , 1995 .
[99] Ing-Marie Andersson,et al. Moveit : Motivations- och engagemangsskapande metoder i arbetsmiljöarbetet , 2005 .
[100] Esa-Pekka Takala. Lack of "statistically significant" association does not exclude causality. , 2010, The spine journal : official journal of the North American Spine Society.
[101] W. E. Hoogendoorn,et al. Physical load during work and leisure time as risk factors for back pain. , 1999, Scandinavian journal of work, environment & health.
[102] A Mital. Psychophysical capacity of industrial workers for lifting symmetrical and asymmetrical loads symmetrically and asymmetrically for 8 h work shifts. , 1992, Ergonomics.
[103] Svend Erik Mathiassen,et al. A case study evaluating the ergonomic and productivity impacts of partial automation strategies in the electronics industry , 2002 .
[104] Lind Carl,et al. Accuracy of a posture measurement system for practitioners , 2015 .
[105] Tohr Nilsson,et al. Whole-body vibration and the risk of low back pain and sciatica: a systematic review and meta-analysis , 2015, International Archives of Occupational and Environmental Health.
[106] L Punnett,et al. The global burden of occupationally related low back pain: estimates from the Global Burden of Disease 2010 study , 2014, Annals of the rheumatic diseases.
[107] Jeremy Ferreira,et al. Development of an assessment tool for repetitive tasks of the upper limbs (ART). , 2009 .
[108] W. Marras,et al. Spine loading at different lumbar levels during pushing and pulling , 2009, Ergonomics.
[109] Robert E. Schlegel,et al. An observational technique for physical work stress analysis , 1989 .
[110] Svend Erik Mathiassen,et al. Increased physical work loads in modern work – a necessity for better health and performance? , 2009, Ergonomics.
[111] Fredric Gerr,et al. A prospective study of computer users: II. Postural risk factors for musculoskeletal symptoms and disorders. , 2002, American journal of industrial medicine.
[112] S S Ulin,et al. Development and evaluation of an observational method for assessing repetition in hand tasks. , 1997, American Industrial Hygiene Association journal.
[113] Monique Lortie,et al. Observation Procedures Characterizing Occupational Physical Activities: Critical Review , 2000, International journal of occupational safety and ergonomics : JOSE.
[114] D B Chaffin,et al. Establishing an industrial strength testing program. , 1980, American Industrial Hygiene Association journal.
[115] W. Marras,et al. The ACGIH TLV for Low Back Risk , 2006 .
[116] Danuta Roman-Liu. Upper Limb Load as a Function of Repetitive Task Parameters: Part 1—A Model of Upper Limb Load , 2005, International journal of occupational safety and ergonomics : JOSE.
[117] Dohyung Kee,et al. Quantitative postural load assessment for whole body manual tasks based on perceived discomfort , 2005, Ergonomics.
[118] A Mital,et al. Comprehensive maximum acceptable weight of lift database for regular 8-hour work shifts. , 1984, Ergonomics.
[119] A. Kjellberg,et al. A direct observation instrument for assessment of nurses' patient transfer technique (DINO). , 2004, Applied ergonomics.
[120] S H Snook,et al. The evaluation of physical tasks in industry. , 1966, American Industrial Hygiene Association journal.
[121] A. I. Bennett,et al. The effects of load and gradient on hand force responses during dynamic pushing and pulling tasks , 2008 .
[122] Waldemar Karwowski. Combination Manual Handling Tasks , 2006 .
[123] R Ketola,et al. Interobserver repeatability and validity of an observation method to assess physical loads imposed on the upper extremities , 2001, Ergonomics.
[124] Gert-Åke Hansson,et al. Validity of a small low-cost triaxial accelerometer with integrated logger for uncomplicated measurements of postures and movements of head, upper back and upper arms. , 2016, Applied ergonomics.
[125] Simon Dagenais,et al. Causal assessment of occupational pushing or pulling and low back pain: results of a systematic review. , 2010, The spine journal : official journal of the North American Spine Society.
[126] O. Menoni,et al. MAPO index for risk assessment of patient manual handling in hospital wards: a validation study , 2006, Ergonomics.
[127] A Mital,et al. Margin of safety for the human back: a probable consensus based on published studies. , 1992, Ergonomics.
[128] W. E. Hoogendoorn,et al. High physical work load and low job satisfaction increase the risk of sickness absence due to low back pain: results of a prospective cohort study , 2002, Occupational and environmental medicine.
[129] Ann Marie Dale,et al. Associations between workplace factors and carpal tunnel syndrome: A multi-site cross sectional study. , 2015, American journal of industrial medicine.
[130] Jim R. Potvin,et al. Maximum isometric finger pull forces , 2011 .
[131] S H Snook,et al. A Study of Size, Distance, Height, and Frequency Effects on Manual Handling Tasks , 1983, Human factors.
[132] Shrawan Kumar. A computer desk for bifocal lens wearers, with special emphasis on selected telecommunication tasks , 1994 .
[133] John Rosecrance,et al. Reliability of assessing upper limb postures among workers performing manufacturing tasks. , 2009, Applied ergonomics.
[134] S E Mathiassen,et al. Assessment of physical work load in epidemiologic studies: concepts, issues and operational considerations. , 1994, Ergonomics.
[135] E. Occhipinti. OCRA: a concise index for the assessment of exposure to repetitive movements of the upper limbs. , 1998, Ergonomics.
[136] J R Wilson,et al. Fundamentals of ergonomics in theory and practice. , 2000, Applied ergonomics.
[137] S H Snook,et al. Challenges in assessing risk factors in epidemiologic studies on back disorders. , 1997, American journal of industrial medicine.
[138] K. Kemmlert,et al. A method assigned for the identification of ergonomic hazards - PLIBEL. , 1995, Applied ergonomics.
[139] P G Dempsey,et al. Evaluation of the ability of power to predict low frequency lifting capacity. , 1998, Ergonomics.
[140] J. Winkel,et al. Occupational musculoskeletal and mental health: Significance of rationalization and opportunities to create sustainable production systems - A systematic review. , 2011, Applied ergonomics.
[141] K. Yau,et al. Effectiveness of a Participatory Workplace Risk Assessment Team in Reducing the Risk and Severity of Musculoskeletal Injury , 2002 .
[142] J H van Dieën,et al. Maximum acceptable weight of lift reflects peak lumbosacral extension moments in a functional capacity evaluation test using free style, stoop and squat lifting , 2012, Ergonomics.
[143] D. Chaffin,et al. Can Biomechanically Determined Stress be Perceived? , 1993 .
[144] R. Slavin. Best evidence synthesis: an intelligent alternative to meta-analysis. , 1995, Journal of clinical epidemiology.
[145] Jafri Mohd Rohani,et al. WERA: an observational tool develop to investigate the physical risk factor associated with WMSDs. , 2011, Journal of human ergology.
[146] Peter Buckle,et al. The development of the Quick Exposure Check (QEC) for assessing exposure to risk factors for work-related musculoskeletal disorders. , 2008, Applied ergonomics.
[147] Katarina Kjellberg,et al. Development of an instrument for assessing workstyle in checkout cashier work (BAsIK). , 2012, Work.
[148] Kermit G. Davis,et al. Evaluation of the Impact of the Revised National Institute for Occupational Safety and Health Lifting Equation , 2016, Hum. Factors.
[149] F. Lötters,et al. Are changes in mechanical exposure and musculoskeletal health good performance indicators for primary interventions? , 2002, International archives of occupational and environmental health.
[150] Bengt-O. Wikström,et al. Effects from twisted postures and whole-body vibration during driving , 1993 .
[151] S J Morrissey,et al. Maximum acceptable weights in load carriage. , 1988, Ergonomics.
[152] H M Toussaint,et al. The validity of visual observation to assess posture in a laboratory-simulated, manual material handling task. , 1994, Ergonomics.
[153] Kermit Davis,et al. Load spatial pathway and spine loading: how does lift origin and destination influence low back response? , 2005, Ergonomics.
[154] Colin G. Drury,et al. A task-based model of manual lifting performance , 1975 .
[155] D. Chaffin,et al. Prediction of metabolic rates for manual materials handling jobs. , 1978, American Industrial Hygiene Association journal.
[156] S. Snook,et al. Maximum weights and work loads acceptable to female workers. , 1974, Occupational health nursing.
[157] S H Snook,et al. The design of manual handling tasks: revised tables of maximum acceptable weights and forces. , 1991, Ergonomics.
[158] Alwin Luttmann,et al. Critical survey on the biomechanical criterion in the NIOSH method for the design and evaluation of manual lifting tasks , 1999 .
[159] Don B. Chaffin,et al. A Biomechanical Model for Analysis of Symmetric Sagittal Plane Lifting , 1970 .
[160] W. G. Allread,et al. The Role of Dynamic Three-Dimensional Trunk Motion in Occupationally-Related Low Back Disorders: The Effects of Workplace Factors, Trunk Position, and Trunk Motion Characteristics on Risk of Injury , 1993, Spine.
[161] A. J. Conger. Integration and generalization of kappas for multiple raters. , 1980 .
[162] Brian Shackel,et al. Usability - Context, framework, definition, design and evaluation , 1991, Interact. Comput..
[163] S J Legg,et al. Maximum acceptable repetitive lifting workloads for an 8-hour work-day using psychophysical and subjective rating methods. , 1981, Ergonomics.
[164] P Holzmann. ARBAN-A new method for analysis of ergonomic effort. , 1982, Applied ergonomics.
[165] A. Garg,et al. Maximum acceptable weights, heart rates and RPEs for one hour's repetitive asymmetric lifting. , 1988, Ergonomics.
[166] Pedro Arezes,et al. Comparison between five risk assessment methods of patient handling , 2016 .
[167] Mark R Stevenson,et al. Evaluating the effectiveness of a participatory ergonomics approach in reducing the risk and severity of injuries from manual handling , 2005, Ergonomics.
[168] Daniel Imbeau,et al. Comparing the results of eight methods used to evaluate risk factors associated with musculoskeletal disorders , 2012 .
[169] Waldemar Karwowski,et al. The Washington State SHARP Approach to Exposure Assessment , 2006 .
[170] D. Chaffin. Localized muscle fatigue--definiton and measurement. , 1973, Journal of occupational medicine. : official publication of the Industrial Medical Association.
[171] A Garg,et al. An evaluation of the NIOSH guidelines for manual lifting, with special reference to horizontal distance. , 1989, American Industrial Hygiene Association journal.
[172] E Occhipinti,et al. Exposure assessment of upper limb repetitive movements: a consensus document developed by the Technical Committee on Musculoskeletal Disorders of International Ergonomics Association (IEA) endorsed by International Commission on Occupational Health (ICOH). , 2001, Giornale italiano di medicina del lavoro ed ergonomia.
[173] F. Gamberale. Perceived exertion, heart rate, oxygen uptake and blood lactate in different work operations. , 1972, Ergonomics.
[174] Waldemar Karwowski,et al. Psychophysical basis for maximum pushing and pulling forces: A review and recommendations. , 2014, International journal of industrial ergonomics.
[175] Martin Helander. Forget about ergonomics in chair design? Focus on aesthetics and comfort! , 2003, Ergonomics.
[176] Stover H. Snook,et al. Maximum acceptable forces for repetitive wrist extension with a pinch grip , 1999 .
[177] Karen Søgaard,et al. Physiological Bases of Work Assessment , 2015 .
[178] W. M. Keyserling,et al. A checklist for evaluating ergonomic risk factors resulting from awkward postures of the legs, trunk and neck , 1992 .
[179] A Mital,et al. Physiological guidelines for the design of manual lifting and lowering tasks: the state of the art. , 1988, American Industrial Hygiene Association journal.
[180] W M Keyserling,et al. A checklist for evaluating ergonomic risk factors associated with upper extremity cumulative trauma disorders. , 1993, Ergonomics.
[181] T B Leamon,et al. Research to reality: a critical review of the validity of various criteria for the prevention of occupationally induced low back pain disability. , 1994, Ergonomics.
[182] W S Marras,et al. A literature review of low back disorder surveillance measures and risk factors. , 1997, Clinical biomechanics.
[183] Svend Erik Mathiassen,et al. Systematic evaluation of observational methods assessing biomechanical exposures at work. , 2010, Scandinavian journal of work, environment & health.
[184] Svend Erik Mathiassen,et al. Variability in mechanical exposure within and between individuals performing a highly constrained industrial work task , 2003, Ergonomics.
[185] D B Chaffin,et al. A longitudinal study of low-back pain as associated with occupational weight lifting factors. , 1973, American Industrial Hygiene Association journal.
[186] Tohr Nilsson,et al. A prospective cohort study investigating an exposure-response relationship among vibration-exposed male workers with numbness of the hands. , 2014, Scandinavian journal of work, environment & health.
[187] W. Marras. Occupational low back disorder causation and control , 2000, Ergonomics.
[188] M Moreau,et al. Corporate ergonomics programme at automobiles Peugeot-Sochaux. , 2003, Applied ergonomics.
[189] S. Gallagher,et al. Tolerance of the lumbar spine to shear: a review and recommended exposure limits. , 2012, Clinical biomechanics.
[190] S. Snook,et al. A study of three preventive approaches to low back injury. , 1978, Journal of occupational medicine. : official publication of the Industrial Medical Association.
[191] H E J Veeger,et al. Are pushing and pulling work-related risk factors for upper extremity symptoms? A systematic review of observational studies , 2014, Occupational and Environmental Medicine.
[192] Pedro M Arezes,et al. Manual materials handling: knowledge and practices among Portuguese health and safety practitioners. , 2011, Work.
[193] Thomas R. Waters,et al. Two-dimensional biomechanical model for estimating strength of youth and adolescents for manual material handling tasks. , 2010, Applied ergonomics.
[194] Svend Erik Mathiassen,et al. Cost-efficient assessment of biomechanical exposure in occupational groups, exemplified by posture observation and inclinometry. , 2014, Scandinavian journal of work, environment & health.
[195] A. Burdorf. The role of assessment of biomechanical exposure at the workplace in the prevention of musculoskeletal disorders. , 2010, Scandinavian journal of work, environment & health.
[196] W Karwowski,et al. The effects of neutral posture deviations on perceived joint discomfort ratings in sitting and standing postures. , 1993, Ergonomics.
[197] W M Keyserling. Postural analysis of the trunk and shoulders in simulated real time. , 1986, Ergonomics.
[198] D Commenges,et al. Prevalence and risk factors of recurrent cervical pain syndrome in a working population. , 1988, Neuroepidemiology.
[199] S J Legg,et al. A psychophysical study of the effects of load and frequency upon selection of workload in repetitive lifting. , 1986, Ergonomics.
[200] Andrew Merryweather,et al. The NIOSH Lifting Equation and Low-Back Pain, Part 1 , 2014, Hum. Factors.
[201] J Ekholm,et al. Intensity and character of pain and muscular activity levels elicited by maintained extreme flexion position of the lower-cervical-upper-thoracic spine. , 2020, Scandinavian journal of rehabilitation medicine.
[202] Stover H. Snook,et al. Distributions of manual materials handling task parameters , 1999 .
[203] C Fransson-Hall,et al. A portable ergonomic observation method (PEO) for computerized on-line recording of postures and manual handling. , 1995, Applied ergonomics.
[204] J. B. Brooke,et al. SUS: A 'Quick and Dirty' Usability Scale , 1996 .
[205] Laura Punnett,et al. Musculoskeletal disorders and occupational exposures: How should we judge the evidence concerning the causal association? , 2014, Scandinavian journal of public health.
[206] Nicholas J. La Delfa,et al. The 'Arm Force Field' method to predict manual arm strength based on only hand location and force direction. , 2017, Applied ergonomics.
[207] A. Garg,et al. Can the Revised NIOSH Lifting Equation Predict Low Back Pain Incidence in a ‘90-day-pain-free-cohort’? , 2012 .
[208] R A Haslam,et al. Processes, barriers, and outcomes described by ergonomics consultants in preventing work-related musculoskeletal disorders. , 2004, Applied ergonomics.
[209] Vincent M Ciriello,et al. Maximal acceptable torques of highly repetitive screw driving, ulnar deviation, and handgrip tasks for 7-hour workdays. , 2002, AIHA journal : a journal for the science of occupational and environmental health and safety.
[210] M Feuerstein,et al. Biomechanical factors affecting upper extremity cumulative trauma disorders in sign language interpreters. , 1992, Journal of occupational medicine. : official publication of the Industrial Medical Association.
[211] Eurofound. Sixth European Working Conditions Survey – Overview Report , 2016 .
[212] W S Marras,et al. An investigation of perceived exertion via whole body exertion and direct muscle force indicators during the determination of the maximum acceptable weight of lift , 2000, Ergonomics.
[213] Patrick G Dempsey,et al. A survey of tools and methods used by certified professional ergonomists. , 2005, Applied ergonomics.
[214] Ryan Ga,et al. The prevalence of musculo-skeletal symptoms in supermarket workers. , 1989, Ergonomics.
[215] O Karhu,et al. Correcting working postures in industry: A practical method for analysis. , 1977, Applied ergonomics.
[216] Gail M. Williams,et al. A systematic review of the global prevalence of low back pain. , 2012, Arthritis and rheumatism.
[217] Å. Kilbom,et al. Assessment of physical exposure in relation to work-related musculoskeletal disorders--what information can be obtained from systematic observations? , 1994, Scandinavian journal of work, environment & health.
[218] R. Light. Measures of response agreement for qualitative data: Some generalizations and alternatives. , 1971 .
[219] L McAtamney,et al. RULA: a survey method for the investigation of work-related upper limb disorders. , 1993, Applied ergonomics.
[220] Jakob Nielsen,et al. Usability engineering , 1997, The Computer Science and Engineering Handbook.
[221] Vincent M. Ciriello,et al. The effects of box size, vertical distance, and height on lowering tasks for female industrial workers , 2005 .
[222] Peter Le,et al. Association between spinal loads and the psychophysical determination of maximum acceptable force during pushing tasks , 2012, Ergonomics.
[223] K W Al-Eisawi,et al. Factors affecting minimum push and pull forces of manual carts. , 1999, Applied ergonomics.
[224] Paul H.P. Yeow,et al. Integrating Ergonomics and Quality Concepts , 2015 .
[225] S H Snook,et al. Psychophysical studies of repetitive wrist flexion and extension. , 1995, Ergonomics.
[226] Alain Delisle,et al. Reproducibility and validity of workers' self-reports of physical work demands. , 2005, Scandinavian journal of work, environment & health.
[227] Massimo Bovenzi,et al. Exposure-response relationship in the hand-arm vibration syndrome: an overview of current epidemiology research , 1998, International archives of occupational and environmental health.
[228] Ivar Heuch,et al. Is there a U-shaped relationship between physical activity in leisure time and risk of chronic low back pain? A follow-up in the HUNT Study , 2016, BMC Public Health.
[229] A. Maslow. A Theory of Human Motivation , 1943 .
[230] Clare Lawton,et al. Development of risk filter and risk assessment worksheets for HSE guidance--'Upper Limb Disorders in the Workplace' 2002. , 2004, Applied ergonomics.
[231] Ernest J. McCormick,et al. THE DEVELOPMENT AND BACKGROUND OF THE POSITION ANALYSIS QUESTIONNAIRE , 1969 .
[232] S Hignett,et al. Rapid entire body assessment (REBA). , 2000, Applied ergonomics.
[233] Thomas J. Armstrong,et al. A Longitudinal Study of Industrial and Clerical Workers: Predictors of Upper Extremity Tendonitis , 2005, Journal of Occupational Rehabilitation.
[234] Francesco S. Violante,et al. Available instruments for measurement of psychosocial factors in the work environment , 2008, International archives of occupational and environmental health.
[235] Don B. Chaffin,et al. Working Postures and Movements: Tools for Evaluation and Engineering , 2005 .
[236] P. Dempsey,et al. A critical review of biomechanical, epidemiological, physiological and psychophysical criteria for designing manual materials handling tasks. , 1998, Ergonomics.
[237] M. Douwes,et al. Development of a non-expert risk assessment method for hand-arm related tasks (HARM) , 2014 .
[238] Deepak Sharan. Ergonomic workplace analysis (EWA). , 2012, Work.
[239] Tom B. Leamon. L5/S1: So who is counting? , 1994 .
[240] H J Gil,et al. Posture recording: a model for sitting posture. , 1989, Applied ergonomics.
[241] William S. Marras. The Working Back: A Systems View , 2008 .
[242] Anil Mital,et al. A psychophysiological study of high and very high frequency manual materials handling: Part II - Carrying and turning , 1993 .
[243] J Winkel. On the manual handling of wide-body carts used by cabin attendants in civil aircraft. , 1983, Applied ergonomics.
[244] C J Snijders,et al. A biomechanical model for the analysis of the cervical spine in static postures. , 1991, Journal of biomechanics.
[245] W. P. Neumann,et al. Ergonomists’ and Engineers’ Views on the Utility of Virtual Human Factors Tools , 2015 .
[246] Don B. Chaffin,et al. BIOMECHANICAL COMPUTERIZED SIMULATION OF HUMAN STRENGTH. , 1974 .
[247] Nicholas J La Delfa,et al. Multidirectional manual arm strength and its relationship with resultant shoulder moment and arm posture , 2016, Ergonomics.
[248] Anil Mital,et al. Manual Materials Handling , 1989 .
[249] F J Bejjani,et al. Occupational musculoskeletal disorders of visual artists. A questionnaire and video analysis. , 1987, Ergonomics.
[250] A J van der Beek,et al. Working postures and activities of lorry drivers: a reliability study of on-site observation and recording on a pocket computer. , 1992, Applied ergonomics.
[251] Jörgen Eklund,et al. A corporate workplace model for ergonomic assessments and improvements. , 2008, Applied ergonomics.
[252] Nils Fallentin,et al. Criteria for classification of posture in repetitive work by observation methods: A review , 1997 .
[253] Monique Lortie,et al. The handling of objects other than boxes: univariate analysis of handling techniques in a large transport company. , 1995, Ergonomics.
[254] E Grandjean,et al. Postural and visual loads at VDT workplaces. I. Constrained postures. , 1981, Ergonomics.
[255] Willem van Mechelen,et al. High physical and psychosocial load at work and sickness absence due to neck pain. , 2002, Scandinavian journal of work, environment & health.
[256] Karlheinz Schaub,et al. Stress screening procedure for the automotive industry: Development and application of screening procedures in assembly and quality control , 2006 .
[257] A Burdorf,et al. Reducing random measurement error in assessing postural load on the back in epidemiologic surveys. , 1995, Scandinavian journal of work, environment & health.
[258] Kurt Jø Rgensen. Permissible loads based on energy expenditure measurements , 1985 .
[259] Mark R Cullen,et al. Effect of systematic ergonomic hazard identification and control implementation on musculoskeletal disorder and injury risk. , 2014, Scandinavian journal of work, environment & health.
[260] Michael W Sonne,et al. A psychophysical study to determine maximum acceptable efforts for a thumb abduction task with high duty cycles , 2015, Ergonomics.
[261] Richard P Wells,et al. The effects of job rotation on the risk of reporting low back pain , 2003, Ergonomics.
[262] Stover H. Snook,et al. The Ergonomics Society The Society's Lecture 1978. THE DESIGN OF MANUAL HANDLING TASKS , 1978 .
[263] Tohr Nilsson,et al. Incidence of Raynaud's phenomenon in relation to hand-arm vibration exposure among male workers at an engineering plant a cohort study , 2008, Journal of occupational medicine and toxicology.
[264] Helena Franzon,et al. DEVELOPMENT, IMPLEMENTATION AND DISSEMINATION OF RAMP : RISK MANAGEMENT ASSESSMENT TOOL FOR MANUAL HANDLING PROACTIVELY , 2011 .
[265] S. S. Stevens,et al. Psychophysics: Introduction to Its Perceptual, Neural and Social Prospects , 1975 .
[266] Alex Burdorf,et al. Associations between work-related factors and specific disorders at the elbow: a systematic literature review. , 2008, Rheumatology.
[267] G Wickström,et al. Load on back in concrete reinforcement work. , 1978, Scandinavian journal of work, environment & health.
[268] P. Jordan. Designing Pleasurable Products: An Introduction to the New Human Factors , 2000 .
[269] P. Buckle,et al. Current techniques for assessing physical exposure to work-related musculoskeletal risks, with emphasis on posture-based methods. , 1999, Ergonomics.
[270] D Goldsheyder,et al. The test-retest reliability of a new occupational risk factor questionnaire for outcome studies of low back pain. , 2001, Applied ergonomics.
[271] Svend Erik Mathiassen,et al. Reliability and criterion validity of an observation protocol for working technique assessments in cash register work , 2016, Ergonomics.
[272] W Rohmert. AET--a new job-analysis method. , 1985, Ergonomics.
[273] P G Dempsey,et al. The psychophysical approach to manual materials handling task design. , 1999, Ergonomics.
[274] Andris Freivalds,et al. Pushing and pulling carts and two-wheeled hand trucks , 2005 .
[275] N. Hadler,et al. Back pain in the workplace. What you lift or how you lift matters far less than whether you lift or when. , 1997, Spine.
[276] Thomas J. Armstrong,et al. Predictors of Upper Extremity Discomfort: A Longitudinal Study of Industrial and Clerical Workers , 2005, Journal of Occupational Rehabilitation.
[277] D B Chaffin,et al. A computerized biomechanical model-development of and use in studying gross body actions. , 1969, Journal of biomechanics.
[278] G D Herrin,et al. Prediction of overexertion injuries using biomechanical and psychophysical models. , 1986, American Industrial Hygiene Association journal.
[279] A. Garg,et al. Maximum acceptable weights and maximum voluntary isometric strengths for asymmetric lifting. , 1986, Ergonomics.
[280] Svend Erik Mathiassen,et al. Cost-efficient observation of working postures from video recordings--more videos, more observers or more views per observer? , 2012, Work.
[281] M. Frings-Dresen,et al. Effect of job rotation on need for recovery, musculoskeletal complaints, and sick leave due to musculoskeletal complaints: a prospective study among refuse collectors. , 2005, American journal of industrial medicine.
[282] W. E. Hoogendoorn,et al. Flexion and Rotation of the Trunk and Lifting at Work Are Risk Factors for Low Back Pain: Results of a Prospective Cohort Study , 2000, Spine.
[283] Rocio Poveda-Bautista,et al. Influences on the use of observational methods by practitioners when identifying risk factors in physical work , 2015, Ergonomics.
[284] B Rasmussen,et al. Ergonomic criteria in large-scale engineering design--II. Evaluating and applying requirements in the real world of design. , 1999, Applied ergonomics.
[285] D B Chaffin,et al. A methodology for documenting hand positions and forces during manual work. , 1979, Journal of biomechanics.
[286] Kensei Nagata,et al. Cervical spine disorders in farm workers requiring neck extension actions , 2006, Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association.
[287] Isabel L Nunes,et al. FAST ERGO_X - a tool for ergonomic auditing and work-related musculoskeletal disorders prevention. , 2009, Work.
[288] Michael Sonne,et al. Development and evaluation of an office ergonomic risk checklist: ROSA--rapid office strain assessment. , 2012, Applied ergonomics.
[289] H. Heneweer,et al. Physical activity and low back pain: A U-shaped relation? , 2009, Pain.