Dimensioning and design of a Modular Multilevel Converter for drive applications

The Modular Multilevel Converter is an upcoming topology for medium voltage drive applications in the megawatt power range. This paper presents the procedure of the converter's dimensioning, which is used for the design of a prototype MMC-System. The voltage rating and the required size of the capacitors in the cells are calculated. The inductance of the arm choke, depending on the modulation strategy is determined. The prototype is realised by using self-powered cells, which are pre-charged without any additional power supply during the start-up phase. The design of the complete prototype including the signal processing is shown. This system provides the opportunity to analyse different control schemes, modulation strategies, impacts on the machine etc.

[1]  Hans-Peter Nee,et al.  On interaction between internal converter dynamics and current control of high-performance high-power AC motor drives with modular multilevel converters , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[2]  M. Braun,et al.  Fully decoupled current control and energy balancing of the Modular Multilevel Matrix Converter , 2012, 2012 15th International Power Electronics and Motion Control Conference (EPE/PEMC).

[3]  Felix Kammerer,et al.  Straight forward vector control of the Modular Multilevel Converter for feeding three-phase machines over their complete frequency range , 2011, IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society.

[4]  Rik W. De Doncker,et al.  Control of the Modular Multi-Level Converter for minimized cell capacitance , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[5]  Staffan Norrga,et al.  Capacitor voltage ripple shaping in modular multilevel converters allowing for operating region extension , 2011, IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society.

[6]  Felix Kammerer,et al.  Optimization of the passive components of the Modular Multilevel Matrix Converter for Drive Applications , 2012 .

[7]  Marc Hiller,et al.  A new highly modular medium voltage converter topology for industrial drive applications , 2009, 2009 13th European Conference on Power Electronics and Applications.

[8]  Anandarup Das,et al.  A Pulse Width Modulation technique for reducing switching frequency for modular multilevel converter , 2011, India International Conference on Power Electronics 2010 (IICPE2010).

[9]  Felix Kammerer,et al.  A novel cascaded vector control scheme for the Modular Multilevel Matrix Converter , 2011, IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society.

[10]  Marc Hiller,et al.  Modulation, Losses, and Semiconductor Requirements of Modular Multilevel Converters , 2010, IEEE Transactions on Industrial Electronics.

[11]  Makoto Hagiwara,et al.  A Medium-Voltage Motor Drive With a Modular Multilevel PWM Inverter , 2010, IEEE Transactions on Power Electronics.

[12]  Manfred Winkelnkemper,et al.  Low output frequency operation of the Modular Multi-Level Converter , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[13]  J. W. Kolar,et al.  Direct modular multi-level converter for gearless low-speed drives , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.