Design and validation of mixed-mode device for fracture toughness analysis of adhesive joints

[1]  S. T. D. Freitas,et al.  On the influence of glass fiber mat on the mixed-mode fracture of composite-to-metal bonded joints , 2021, Composite Structures.

[2]  M. Worswick,et al.  Quantification of mixed mode loading and bond line thickness on adhesive joint strength using novel test specimen geometry , 2020 .

[3]  G. Stamoulis,et al.  Linear elastic analysis of the loading rate dependency of the fracture properties of structural adhesives in the mixed mode I+II plane , 2020 .

[4]  Evangelos Karachalios,et al.  Assessment of CNT-doping and hot-wet storage aging effects on Mode I, II and I/II interlaminar fracture toughness of a UD Graphite/Epoxy material system , 2020 .

[5]  K. O. Low,et al.  Interlaminar fracture toughness of a plain weave flax/epoxy composite , 2018, Plastics, Rubber and Composites.

[6]  R. Campilho,et al.  Mixed-mode fracture analysis of composite bonded joints considering adhesives of different ductility , 2017, International Journal of Fracture.

[7]  J. Renart,et al.  A data reduction method based on the J-integral to obtain the interlaminar fracture toughness in a mode II end-loaded split (ELS) test , 2016 .

[8]  R. Campilho,et al.  Comparative evaluation of the Double-Cantilever Beam and Tapered Double-Cantilever Beam tests for estimation of the tensile fracture toughness of adhesive joints , 2016 .

[9]  P. Compston,et al.  Optimisation study of tapered scarf and stepped-lap joints in composite repair patches , 2015 .

[10]  F. Chaves.  fracture mechanics applied to the design of adhesively bonded joints , 2013 .

[11]  J. Hausmann,et al.  Fracture simulation of CFRP laminates in mixed mode bending for hybrid Titanium-PEEK /AS4 composites , 2008 .

[12]  D. Dillard,et al.  Development of a simple mixed-mode fracture test and the resulting fracture energy envelope for an adhesive bond , 2007 .

[13]  A. Morais,et al.  Application of the effective crack method to mode I and mode II interlaminar fracture of carbon/epoxy unidirectional laminates , 2007 .

[14]  Chad M. Landis,et al.  Constraint effects in adhesive joint fracture , 2005 .

[15]  A. Szekrényes,et al.  Beam and finite element analysis of quasi-unidirectional composite SLB and ELS specimens , 2004 .

[16]  Jr. J. Crews,et al.  Mixed-Mode Bending Method for Delamination Testing , 1990 .

[17]  C. Hong,et al.  Modified end notched flexure specimen for mixed mode interlaminar fracture in laminated composites , 1990 .

[18]  Jan K. Spelt,et al.  Mixed-mode fracture characterization of adhesive joints , 1994 .