Annealing coordinates the deformation of shear band to improve the microstructure difference and simultaneously promote the strength-plasticity of composite plate

[1]  A. Mostafapour,et al.  Influence of ultrasonic vibration on the microstructure and texture evolution of AZ91 magnesium alloy during ultrasonic-assisted friction stir welding , 2021, Welding in the World.

[2]  Jianneng Liang,et al.  Balancing the strength and ductility of Mg-6Zn-0.2Ca alloy via sub-rapid solidification combined with hard-plate rolling , 2021 .

[3]  Wei Zhang,et al.  Altered age-hardening behavior in the ultrafine-grained surface layer of Mg-Zn-Y-Ce-Zr alloy processed by sliding friction treatment , 2021, Journal of Materials Science & Technology.

[4]  Feng Li,et al.  Formability and interface structure of Al/Mg/Al composite sheet rolled by hard-plate rolling (HPR) , 2021 .

[5]  Peng Cao,et al.  Twin crystal structured Al-10 wt.% Mg alloy over broad velocity conditions achieved by high thermal gradient directional solidification , 2021 .

[6]  Yang Zheng,et al.  Improved corrosion behavior of high-purity Mg surface modified by laser scanning and polycaprolactone spin coating , 2021 .

[7]  W. Sun,et al.  A kind of sandwich-combined precipitate formed in a duplex-aged Mg-Gd-Y alloy , 2021 .

[8]  Zhengqiang Zhu,et al.  Analysis of Microstructure and Mechanical Properties of AZ31B Magnesium Alloy/AA6061 Aluminum Alloy Welded Joint by Ultrasonic Welding , 2021, Materials Research.

[9]  Ping Wang,et al.  Reducing the yield asymmetry in Mg-5Li-3Al-2Zn alloy by hot-extrusion and multi-pass rolling , 2020 .

[10]  P. Mao,et al.  Effect of yttrium addition on dynamic mechanical properties, microstructure, and fracture behavior of extrusion-shear ZC61 + xY (x = 0, 1, 2, 3) alloys , 2020 .

[11]  X. Fu,et al.  Interfacial evolution and mechanical property of AZ31BMg/5052Al clad plate manufactured by corrugated + flat rolling technique , 2020 .

[12]  L. Bian,et al.  Microstructural evolution and mechanical behavior of Mg/Al laminated composite sheet by novel corrugated rolling and flat rolling , 2019, Materials Science and Engineering: A.

[13]  Guoqun Zhao,et al.  Study on Al/Mg/Al sheet fabricated by combination of porthole die co-extrusion and subsequent hot rolling , 2019, Journal of Alloys and Compounds.

[14]  Qiang Chen,et al.  Ultrasonic assisted squeeze casting of a wrought aluminum alloy , 2019, Journal of Materials Processing Technology.

[15]  Guoqun Zhao,et al.  Fabrication of Al/Mg/Al laminate by a porthole die co-extrusion process , 2018, Journal of Materials Processing Technology.

[16]  Wen-xian Wang,et al.  Influence of multi-pass rolling and subsequent annealing on the interface microstructure and mechanical properties of the explosive welding Mg/Al composite plates , 2018 .

[17]  Dingfei Zhang,et al.  Microstructure, texture and mechanical properties evolution of pre-twinning Mg alloys sheets during large strain hot rolling , 2016 .

[18]  Xingbo Liu,et al.  Binding property of Al/Mg/Al thin plates fabricated by one-pass hot rolling with different reduction ratios, temperatures and annealing treatments , 2018, Rare Metals.

[19]  Lei Zhang,et al.  Achieving high strength and high ductility in magnesium alloy using hard-plate rolling (HPR) process , 2015, Scientific Reports.

[20]  Jung-Su Kim,et al.  Improvement of interfacial bonding strength in roll-bonded Mg/Al clad sheets through annealing and secondary rolling process , 2015 .

[21]  C. Zhiqiang,et al.  Interfacial Microstructure and Mechanical Properties of Al5052/Mg-9.5Li-2Al Alloy Clad Plates , 2015 .

[22]  A. Macwan,et al.  Effect of annealing on interface microstructures and tensile properties of rolled Al/Mg/Al tri-layer clad sheets , 2013 .

[23]  D. Yoon,et al.  Effect of annealing on the interface microstructure and mechanical properties of a STS–Al–Mg 3-ply clad sheet , 2012 .

[24]  Chao Xu,et al.  Microstructure and mechanical properties of the Mg/Al multilayer fabricated by accumulative roll bonding (ARB) at ambient temperature , 2012 .

[25]  P. Yang,et al.  Orientational Analysis on Static Recrystallization at Tension Twins in AZ31 Magnesium Alloy , 2011 .

[26]  Yufeng Zheng,et al.  Corrosion resistance and surface biocompatibility of a microarc oxidation coating on a Mg-Ca alloy. , 2011, Acta biomaterialia.

[27]  B. Chin,et al.  Microstructure and properties of magnesium AZ31B–aluminum 7075 explosively welded composite plate , 2010 .

[28]  R. Zeng,et al.  Influence of silane on corrosion resistance of magnesium alloy AZ31 with thermally sprayed aluminum coatings , 2010 .

[29]  Nack J. Kim,et al.  Microstructure and tensile properties of twin-roll cast Mg-Zn-Mn-Al alloys , 2007 .

[30]  Weite Wu,et al.  Microstructural characterization of Al/Mg alloy interdiffusion mechanism during Accumulative Roll Bonding , 2007 .

[31]  S. Agnew,et al.  The texture and anisotropy of magnesium–zinc–rare earth alloy sheets , 2007 .

[32]  M. Pérez-Prado,et al.  Texture evolution during annealing of magnesium AZ31 alloy , 2002 .