Experimental Investigation of a Bleed Air Ice Protection System

[1]  P. Hrycak,et al.  Heat transfer from a row of impinging jets to concave cylindrical surfaces , 1981 .

[2]  P. Hrycak,et al.  A study of characteristics of developing, incompressible, axi-symmetric jets , 1974 .

[3]  Farooq Saeed,et al.  Surface Heat Transfer Study for Ice Accretion and Anti-Icing Prediction in Three Dimension , 2004 .

[4]  François Morency,et al.  Heat and mass transfer in the case of an anti-icing system modelisation , 1999 .

[5]  Robert Gardon,et al.  The role of turbulence in determining the heat-transfer characteristics of impinging jets , 1965 .

[6]  Wagdi G. Habashi,et al.  CHT3D: FENSAP-ICE CONJUGATE HEAT TRANSFER COMPUTATIONS WITH DROPLET IMPINGEMENT AND RUNBACK EFFECTS , 2002 .

[7]  Richard J Goldstein,et al.  Flow visualization of a round jet impinging on cylindrical surfaces , 1999 .

[8]  C. R. Truman,et al.  Jet array impingement with crossflow-correlation of streamwise resolved flow and heat transfer distributions , 1981 .

[9]  A. A. Tawfek,et al.  Heat transfer and pressure distributions of an impinging jet on a flat surface , 1996 .

[10]  R. Gardon Heat Transfer Between a Flat Plate and Jets of Air Impinging on It , 1962 .

[11]  David Theodore Vader Convective and boiling heat transfer from a heated surface to an impinging, planar jet of water , 1988 .

[12]  P. Hrycak,et al.  Experimental flow characteristics of a single turbulent jet impinging on a flat plate , 1970 .

[13]  Guilherme Lara Oliveira,et al.  Three -dimensional Thermal Coupled Analysis of a Wing Slice Slat with a Piccolo Tube , 2000 .

[14]  Wagdi G. Habashi,et al.  3D thermal analysis of an anti-icing device using FENSAP-ICE , 1998 .

[15]  D. E. Metzger,et al.  Impingement Cooling of Concave Surfaces With Lines of Circular Air Jets , 1969 .

[16]  John Watterson,et al.  Heat transfer correlation for anti-icing systems , 2002 .

[17]  Richard J Goldstein,et al.  Effect of entrainment on the heat transfer to a heated circular air jet impinging on a flat surface , 1990 .

[18]  John F. Foss Measurements in a large angle oblique jet impingement flow , 1978 .

[19]  William B. Wright,et al.  An Evaluation of Jet Impingement Heat Transfer Correlations for Piccolo Tube Application , 2004 .

[20]  Raymond Viskanta,et al.  Effect of jet-jet spacing on convective heat transfer to confined, impinging arrays of axisymmetric air jets , 1994 .

[21]  G. C. Huang,et al.  Investigations of Heat-Transfer Coefficients for Air Flow Through Round Jets Impinging Normal to a Heat-Transfer Surface , 1963 .

[22]  B. R. Hollworth,et al.  Heat Transfer From Arrays of Impinging Jets with Large Jet-to-Jet Spacing , 1978 .

[23]  W. Tabakoff,et al.  Heat Transfer by a Square Array of Round Air Jets Impinging Perpendicular to a Flat Surface Including the Effect of Spent Air , 1970 .

[24]  Richard J Goldstein,et al.  Heat transfer from a flat surface to an oblique impinging jet , 1988 .

[25]  S. Beltaos,et al.  OBLIQUE IMPINGEMENT OF CIRCULAR TURBULENT JETS , 1976 .

[26]  Richard J Goldstein,et al.  Heat transfer to a row of impinging circular air jets including the effect of entrainment , 1991 .

[27]  Chie Gau,et al.  Surface Curvature Effect on Slot-Air-Jet Impingement Cooling Flow and Heat Transfer Process , 1991 .

[28]  A. A. Tawfek,et al.  Heat transfer studies of the oblique impingement of round jets upon a curved surface , 2002 .

[29]  David N. Anderson,et al.  Manual of Scaling Methods , 2004 .

[30]  Ephraim M Sparrow,et al.  Heat Transfer Characteristics of an Obliquely Impinging Circular Jet , 1980 .

[31]  Mohamed S. El-Genk,et al.  Heat transfer of an impinging jet on a flat surface , 1994 .

[32]  Kamel Al-Khalil,et al.  Mixed-Phase Icing Simulation and Testing at the Cox Icing Wind Tunnel , 2003 .

[33]  R. J. Goldstein,et al.  Streamwise distribution of the recovery factor and the local heat transfer coefficient to an impinging circular air jet , 1986 .

[34]  B. W. Webb,et al.  The effect of inclination on local heat transfer under an axisymmetric, free liquid jet , 1991 .

[35]  E. James,et al.  Jet impingement heat transfer A literature survey , 1986 .

[36]  John F. Foss,et al.  Mean flow characteristics for the oblique impingement of an axisymmetric jet , 1975 .

[37]  H. Martin Heat and Mass Transfer between Impinging Gas Jets and Solid Surfaces , 1977 .

[38]  Michael Papadakis,et al.  Parametric Investigation of a Bleed Air Ice Protection System , 2006 .