Abstract A new fuel assembly design for a thermal supercritical water cooled reactor (SCWR) core is proposed. Compared to the existing fuel assemblies, the present fuel assembly has two-rows of fuel rods between the moderator channels, to achieve a more uniform moderation for all fuel rod cells, and subsequently, a more uniform radial power distribution. In addition, a neutron-kinetics/thermal-hydraulics coupling method is developed, to analyze the neutron-physical and thermal-hydraulic behavior of the fuel assembly designs. This coupling method is based on the sub-channel analysis code COBRA-IV for thermal-hydraulics and the neutron-kinetics code SKETCH-N for neutron-physics. Both the COBRA-IV code and the SKETCH-N code are accordingly modified. An interface is established for the data transfer between these two codes. This coupling method is applied to both the one-row fuel assemblies (previous design) and the two-row fuel assemblies (present design). The performance of the two types of fuel assemblies is compared. The results show clearly that the two-row fuel assembly has more favorable neutron-physical and thermal-hydraulic characteristics than the one-row fuel assembly. The effect of various parameters on the fuel assembly performance is discussed. The coupling method is proven to be well suitable for further applications to SCWR fuel assembly design analysis.
[1]
Yong-Hwan Jeong,et al.
Research of a Supercritical Pressure Water Cooled Reactor in Korea
,
2004
.
[2]
X. Cheng,et al.
Design analysis of core assemblies for supercritical pressure conditions
,
2003
.
[3]
J. Buongiorno,et al.
Study of Solid Moderators for the Thermal-Spectrum Supercritical Water-Cooled Reactor
,
2006
.
[4]
Y. Oka.
Design concept of once-through cycle supercritical-pressure light water cooled reactors
,
2000
.
[5]
J. Bird,et al.
Properties of Water and Steam
,
2018,
Conventional and Alternative Power Generation.
[6]
Yoshiaki Oka,et al.
Elements of Design Consideration of Once-Through Cycle, Supercritical-Pressure Light Water Cooled Reactor
,
2002
.
[7]
S. Koshizuka,et al.
Three-dimensional core design of SCLWR-H with neutronic and thermal-hydraulic coupling
,
2003
.
[8]
Yoshiaki Oka,et al.
Conceptual design of a high temperature power reactor cooled and moderated by supercritical light water
,
1998
.
[9]
Xu Cheng,et al.
Numerical analysis of heat transfer in supercritical water cooled flow channels
,
2007
.
[10]
D. S. Trent,et al.
COBRA-IV: the model and the method
,
1977
.