Biomechanical study of pediatric human cervical spine: a finite element approach.

Although considerable effort has been made to understand the biomechanical behavior of the adult cervical spine, relatively little information is available on the response of the pediatric cervical spine to external forces. Since significant anatomical differences exist between the adult and pediatric cervical spines, distinct biomechanical responses are expected. The present study quantified the biomechanical responses of human pediatric spines by incorporating their unique developmental anatomical features. One-, three-, and six-year-old cervical spines were simulated using the finite element modeling technique, and their responses computed and compared with the adult spine response. The effects of pure overall structural scaling of the adult spine, local component developmental anatomy variations that occur to the actual pediatric spines, and structural scaling combined with local component anatomy variations on the responses of the pediatric spines were studied. Age- and component-related developmental anatomical features included variations in the ossification centers, cartilages, growth plates, vertebral centrum, facet joints, and annular fibers and nucleus pulposus of the intervertebral discs. The flexibility responses of the models were determined under pure compression, pure flexion, pure extension, and varying degrees of combined compression-flexion and compression-extension. The pediatric spine responses obtained with the pure overall (only geometric) scaling of the adult spine indicated that the flexibilities consistently increase in a uniform manner from six- to one-year-old spines under all loading cases. In contrast, incorporation of local anatomic changes specific to the pediatric spines of the three age groups (maintaining the same adult size) not only resulted in considerable increases in flexibilities, but the responses also varied as a function of the age of the pediatric spine and type of external loading. When the geometric scaling effects were added to these spines, the increases in flexibilities were slightly higher; however, the pattern of the responses remained the same as found in the previous approach. These results indicate that inclusion of developmental anatomical changes characteristic of the pediatric spines has more of a predominant effect on biomechanical responses than extrapolating responses of the adult spine based on pure overall geometric scaling.

[1]  D. Bailey,et al.  The normal cervical spine in infants and children. , 1952, Radiology.

[2]  G Ray,et al.  Mathematical and finite element analysis of spine injuries. , 1987, Critical reviews in biomedical engineering.

[3]  S. Katoh,et al.  Growth of the Cervical Spine With Special Reference to Its Lordosis and Mobility , 1996, Spine.

[4]  N. Langrana,et al.  Role of Ligaments and Facets in Lumbar Spinal Stability , 1995, Spine.

[5]  John W. Melvin,et al.  Injury Assessment Reference Values for the CRABI 6-Month Infant Dummy in a Rear-Facing Infant Restraint with Airbag Deployment , 1995 .

[6]  K. Hayashi,et al.  Origin of the uncus and of Luschka's joint in the cervical spine. , 1985, The Journal of bone and joint surgery. American volume.

[7]  Michael Kleinberger,et al.  Application of Finite Element Techniques to the Study of Cervical Spine Mechanics , 1993 .

[8]  H. Wu,et al.  Mechanical behavior of the human annulus fibrosus. , 1976, Journal of biomechanics.

[9]  Srirangam Kumaresan,et al.  Methodology to Quantify Human Cervical Spine Uncovertebral Joint Anatomy , 1997 .

[10]  N Yoganandan,et al.  Finite element modeling approaches of human cervical spine facet joint capsule. , 1998, Journal of biomechanics.

[11]  N Yoganandan,et al.  Finite element analysis of anterior cervical spine interbody fusion. , 1997, Bio-medical materials and engineering.

[12]  A B Schultz,et al.  Material constants for a finite element model of the intervertebral disk with a fiber composite annulus. , 1986, Journal of biomechanical engineering.

[13]  N Yoganandan,et al.  Finite element modeling of cervical laminectomy with graded facetectomy. , 1997, Journal of spinal disorders.

[14]  R ROAF,et al.  Vertebral growth and its mechanical control. , 1960, The Journal of bone and joint surgery. British volume.

[15]  F KNUTSSON,et al.  Growth and differentiation of the postnatal vertebra. , 1961, Acta radiologica.

[16]  F Lavaste,et al.  A three-dimensional parameterized finite element model of the lower cervical spine. Study of the influence of the posterior articular facets. , 1997, Journal of biomechanics.

[17]  J. Taylor,et al.  Growth of human intervertebral discs and vertebral bodies. , 1975, Journal of anatomy.

[18]  N. Yoganandan,et al.  Finite element applications in human cervical spine modeling. , 1996, Spine.

[19]  N. Yoganandan,et al.  Finite element analysis of the cervical spine: a material property sensitivity study. , 1999, Clinical biomechanics.

[20]  T Yamamuro,et al.  Analysis and Prevention of Spinal Column Deformity Following Cervical Laminectomy I: Pathogenetic Analysis of Postlaminectomy Deformities , 1991, Spine.

[21]  J. Galante Tensile properties of the human lumbar annulus fibrosus. , 1967, Acta orthopaedica Scandinavica.

[22]  Srirangam Kumaresan,et al.  Paediatric Neck Modelling Using Finite Element Analysis , 1997 .

[23]  N Yoganandan,et al.  Finite element model of the human lower cervical spine: parametric analysis of the C4-C6 unit. , 1997, Journal of biomechanical engineering.

[24]  F. G. Evans,et al.  Strength of biological materials , 1970 .

[25]  R. Snyder Anthropometry of infants, children and youths to age 18 for product safety design. Final report , 1977 .

[26]  G B Andersson,et al.  A model to study the disc degeneration process. , 1994, Spine.

[27]  Saiwei Yang,et al.  Finite-Element Modeling of the Synthetic Intervertebral Disc , 1991, Spine.

[28]  Y K Liu,et al.  A three-dimensional nonlinear finite element model of lumbar intervertebral joint in torsion. , 1987, Journal of biomechanical engineering.

[29]  A. M. Ahmed,et al.  Stress analysis of the lumbar disc-body unit in compression. A three-dimensional nonlinear finite element study. , 1984, Spine.

[30]  D F Huelke,et al.  Infants and children in the adult world of automobile safety design: pediatric and anatomical considerations for design of child restraints. , 1969, Journal of biomechanics.

[31]  Y. E. Kim,et al.  An Analytical Investigation of the Mechanics of Spinal Instrumentation , 1988, Spine.

[32]  V. Goel,et al.  Prediction of Load Sharing Among Spinal Components of a C5‐C6 Motion Segment Using the Finite Element Approach , 1998, Spine.

[33]  O Lindahl,et al.  Mechanical properties of dried defatted spongy bone. , 1976, Acta orthopaedica Scandinavica.

[34]  F Lavaste,et al.  Three-dimensional geometrical and mechanical modelling of the lumbar spine. , 1992, Journal of biomechanics.

[35]  B W Hindman,et al.  Early appearance of the secondary vertebral ossification centers. , 1970, Radiology.

[36]  P. Brinckmann,et al.  Interlaminar Shear Stresses and Laminae Separation in a Disc: Finite Element Analysis of the L3‐L4 Motion Segment Subjected to Axial Compressive Loads , 1995, Spine.