Deposition of Ti–6Al–4V using laser and wire, part I: Microstructural properties of single beads

Abstract In this paper, the microstructural characteristics of Ti–6Al–4V single beads and their dependence on process parameters are addressed. Single beads represent the smallest – and therefore fundamental – unit of additive manufactured components. Bead-on-plates and single beads are produced using a 3.5 kW Nd:YAG laser and Ti–6Al–4V wire. Within 71 sets of process parameters laser beam power, welding speed, and wire-feed speed are varied. The microstructures are investigated by light and scanning electron microscopy, and are divided into several zones according to the thermal history underwent. Microstructural differences of the beads are correlated to the process parameters and discussed. The experiments reveal fundamental microstructural and process characteristics which are helpful for the repeatable and predictable manufacturing and understanding of multi-layered components.

[1]  J. Beuth,et al.  The role of process variables in laser-based direct metal solid freeform fabrication , 2001 .

[2]  S. David,et al.  Welding: Solidification and microstructure , 2003 .

[3]  W. Sha,et al.  Finite element modeling of the morphology of β to α phase transformation in Ti-6Al-4V alloy , 2002 .

[4]  Lin Li,et al.  A comparative study of wire feeding and powder feeding in direct diode laser deposition for rapid prototyping , 2005 .

[5]  J. Kruth,et al.  A study of the microstructural evolution during selective laser melting of Ti–6Al–4V , 2010 .

[6]  T. Sınmazçelik,et al.  Laser welding of Ti6Al4V titanium alloys , 2009 .

[7]  H. Flower.  Microstructural development in relation to hot working of titanium alloys , 1990 .

[8]  R. C. Picu,et al.  Mechanical behavior of Ti–6Al–4V at high and moderate temperatures—Part I: Experimental results , 2002 .

[9]  Xinhua Wu,et al.  Direct laser fabrication and microstructure of a burn-resistant Ti alloy , 2002 .

[10]  K. Easterling,et al.  Phase Transformations in Metals and Alloys , 2021 .

[11]  S. Kelly,et al.  Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: Part I. Microstructural characterization , 2004 .

[12]  Omer Van der Biest,et al.  Wire based additive layer manufacturing: Comparison of microstructure and mechanical properties of Ti–6Al–4V components fabricated by laser-beam deposition and shaped metal deposition , 2011 .

[13]  B. Baufeld,et al.  Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: Microstructure and mechanical properties , 2010 .

[14]  E. Collings,et al.  Materials Properties Handbook: Titanium Alloys , 1994 .

[15]  Abbas Ebnonnasir,et al.  Artificial neural network modeling for evaluating of epitaxial growth of Ti6Al4V weldment , 2006 .

[16]  Lin Li,et al.  Effects of wire feeding direction and location in multiple layer diode laser direct metal deposition , 2005 .

[17]  Zhengxiao Guo,et al.  Microstructural evolution of a Ti-6Al-4V alloy during thermomechanical processing , 2000 .

[18]  Manfred Peters,et al.  Titan und Titanlegierungen , 2002 .

[19]  I. R. Pashby,et al.  Deposition of Ti–6Al–4V using a high power diode laser and wire, Part II: Investigation on the mechanical properties , 2008 .

[20]  J. Dongun Kim,et al.  Nd : YAG laser cladding of marine propeller with hastelloy C-22 , 2004 .

[21]  Christoph Leyens,et al.  Titanium Alloys for Aerospace Applications , 2003 .

[22]  S. S. Al-Bermani,et al.  The Origin of Microstructural Diversity, Texture, and Mechanical Properties in Electron Beam Melted Ti-6Al-4V , 2010 .

[23]  S. L. Semiatin,et al.  The laser additive manufacture of Ti-6Al-4V , 2001 .