论文信息 - Sub-mA single ended CMOS low noise amplifier with 2.41 dB noise figure

Sub-mA single ended CMOS low noise amplifier with 2.41 dB noise figure

This paper presents a single ended low noise amplifier (LNA) using 0.18 μm CMOS process packed and tested on a printed circuit board. The LNA is powered at 1.0 V supply and drains 0.95 mA only. The LNA provides a forward gain of 11.91 dB with a noise figure of only 2.41 dB operating in the 0.9 GHz band. The measured value of IIP3 is 0.7 dBm and of P1dB is −12 dBm.

Zhang Liang | Hari Krishna Garg | Ram Singh Rana

[1] Qiuting Huang,et al. A low-power 200-MHz receiver for wireless hearing aid devices , 2003 .

[2] Z. Li. Packaged single-ended CMOS low noise amplifier with 2.3 dB noise figure and 64 dBm IIP2 , 2004 .

[3] S. Mahdavi,et al. Fully integrated 2.2-mW CMOS front end for a 900-MHz wireless receiver , 2002 .

[4] Trung-Kien Nguyen,et al. CMOS low-noise amplifier design optimization techniques , 2004, IEEE Transactions on Microwave Theory and Techniques.

[5] Hervé Lapuyade,et al. A 1-V 2GHz VLSI CMOS low noise amplifier , 2003, IEEE Radio Frequency Integrated Circuits (RFIC) Symposium, 2003.