Eigenvalue-based optimization of incompressible media using mixed finite elements with application to isolation devices

Abstract An alternative formulation for the eigenvalue optimization of structures made of incompressible material is presented. The proposed methodology is based on the adoption of a “truly-mixed” variational formulation that descends from the principle of Hellinger–Reissner and passes the inf-sup condition [F. Brezzi, M. Fortin, Mixed and Hybrid Finite Element Methods, Springer-Verlag, New York, 1991] even for incompressible materials. This therefore allows to avoid the locking phenomenon, that is a difficulty often found handling rubber material by means of commonly used displacement-based finite elements. The approach implemented in the work consists in the adoption of the discretized form of the “truly-mixed” formulation that uses the composite element of Johnson and Mercier [C. Johnson, B. Mercier, Some equilibrium finite elements methods for two dimensional elasticity problems, Numer. Math. 30 (1978) 103–116] to address eigenvalue-based optimization problems for rubber-like materials. Firstly classical eigenvalue designs for in-plane vibrating bidimensional structures are studied relying on MMA [K. Svamberg, Method of moving asymptotes – a new method for structural optimization, Int. J. Numer. Methods Engrg. 24 (3) (1987) 359–373] as minimization algorithm. Peculiar attention is paid to numerical troubles that may arise managing such kind of problems, as the appearance of localized modes preventing an adequate convergence pattern and the difficulties in getting pure 0–1 designs typical of plane strain conditions. Suitable mass and stiffness interpolations are presented and tested to overcome these problems. Afterwards, the proposed framework is used to approach the design of rubber-like materials in a minimum compliance setting with the imposition of an upper limit on the first eigenvalue. A bi-phase stiffness interpolation is moreover implemented to deal with steel–rubber design of aseismic bearing devices in civil engineering. Some forthcoming investigations are eventually highlighted including the implementation of stress constraints to improve the presented designs for manufacturing.

[1]  M. M. Neves,et al.  Generalized topology design of structures with a buckling load criterion , 1995 .

[2]  Salam Rahmatalla,et al.  Form Finding of Sparse Structures with Continuum Topology Optimization , 2003 .

[3]  H. Mlejnek,et al.  An engineer's approach to optimal material distribution and shape finding , 1993 .

[4]  Niels Olhoff,et al.  Topology optimization of continuum structures: A review* , 2001 .

[5]  Y. Maeda,et al.  Structural topology optimization of vibrating structures with specified eigenfrequencies and eigenmode shapes , 2006 .

[6]  Olaf Schenk,et al.  Solving unsymmetric sparse systems of linear equations with PARDISO , 2004, Future Gener. Comput. Syst..

[7]  N. Kikuchi,et al.  Topological design for vibrating structures , 1995 .

[8]  M. Zhou,et al.  The COC algorithm, Part II: Topological, geometrical and generalized shape optimization , 1991 .

[9]  S. Rahmatalla,et al.  A Q4/Q4 continuum structural topology optimization implementation , 2004 .

[10]  Claes Johnson,et al.  Some equilibrium finite element methods for two-dimensional elasticity problems , 1978 .

[11]  N. Kikuchi,et al.  Solutions to shape and topology eigenvalue optimization problems using a homogenization method , 1992 .

[12]  Niels Olhoff,et al.  Topology Optimization of Plate and Shell Structures with Multiple Eigenfrequencies , 1995 .

[13]  Niels Leergaard Pedersen.  On topology optimization of plates with prestress , 2001 .

[14]  K. Svanberg,et al.  An alternative interpolation scheme for minimum compliance topology optimization , 2001 .

[15]  Ichiro Hagiwara,et al.  Eigenfrequency Maximization of Plates by Optimization of Topology Using Homogenization and Mathematical Programming , 1994 .

[16]  Matteo Bruggi,et al.  Topology optimization of incompressible media using mixed finite elements , 2007 .

[17]  A. Seiranyan.  Multiple eigenvalues in optimization problems , 1987 .

[18]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[19]  O. Sigmund,et al.  Topology optimization using a mixed formulation: An alternative way to solve pressure load problems , 2007 .

[20]  C. Swan,et al.  A SYMMETRY REDUCTION METHOD FOR CONTINUUM STRUCTURAL TOPOLOGY OPTIMIZATION , 1999 .

[21]  Jakob S. Jensen,et al.  On maximal eigenfrequency separation in two-material structures: the 1D and 2D scalar cases , 2006 .

[22]  N. Olhoff,et al.  Multiple eigenvalues in structural optimization problems , 1994 .

[23]  Danny C. Sorensen,et al.  Deflation Techniques for an Implicitly Restarted Arnoldi Iteration , 1996, SIAM J. Matrix Anal. Appl..

[24]  Michel Fortin,et al.  Mixed and Hybrid Finite Element Methods , 2011, Springer Series in Computational Mathematics.

[25]  K. Svanberg.  The method of moving asymptotes—a new method for structural optimization , 1987 .

[26]  M. Bendsøe,et al.  Material interpolation schemes in topology optimization , 1999 .

[27]  Jakob S. Jensen,et al.  Topology optimization of acoustic–structure interaction problems using a mixed finite element formulation , 2007 .

[28]  J. Petersson,et al.  Numerical instabilities in topology optimization: A survey on procedures dealing with checkerboards, mesh-dependencies and local minima , 1998 .

[29]  N. L. Pedersen.  Maximization of eigenvalues using topology optimization , 2000 .

[30]  O. Sigmund,et al.  Stiffness design of geometrically nonlinear structures using topology optimization , 2000 .

[31]  O. Schenk,et al.  ON FAST FACTORIZATION PIVOTING METHODS FOR SPARSE SYMMETRI C INDEFINITE SYSTEMS , 2006 .

[32]  P. Duysinx,et al.  Note on topology optimization of continuum structures including self-weight , 2005 .