Effect of V on microstructure, wear and corrosion properties in AlCoCrMoV high entropy alloy coatings by laser cladding

[1]  Jianfeng Liu,et al.  Effect of AlN reinforcement particles on hot-tearing susceptibility of AlN/AZ91D composites , 2022, Materials Today Communications.

[2]  Yaxiong Guo,et al.  Nano-TiC reinforced [Cr-Fe4Co4Ni4]Cr3 high-entropy-alloy composite coating fabricated by laser cladding , 2022, Journal of Materials Research and Technology.

[3]  Junping Luo,et al.  Mechanical and chemical properties of CoCrFeNiMo0.2 high entropy alloy coating fabricated on Ti6Al4V by laser cladding , 2022, Intermetallics.

[4]  Sen Yang,et al.  Effect of Al content on microstructure and mechanical properties of as-cast AlxFeMnNiCrCu0.5 high-entropy alloys , 2022, Materials Science and Engineering: A.

[5]  P. Liaw,et al.  Nanoprecipitate‐Strengthened High‐Entropy Alloys , 2021, Advanced science.

[6]  Haifeng Wang,et al.  Microstructure and tribological properties of TiZrV0.5Nb0.5Al refractory high entropy alloys at elevated temperature , 2021, Wear.

[7]  Xiaogang Li,et al.  Evolution in microstructure, wear, corrosion, and tribocorrosion behavior of Mo-containing high-entropy alloy coatings fabricated by laser cladding , 2021 .

[8]  Wei Zhang,et al.  Microstructure and hardness of NbTiZr and NbTaTiZr refractory medium-entropy alloy coatings on Zr alloy by laser cladding , 2021 .

[9]  Xingwang Cheng,et al.  Effects of vanadium concentration on mechanical properties of V NbMoTa refractory high-entropy alloys , 2021 .

[10]  B. Cantor.  Multicomponent high-entropy Cantor alloys , 2020, Progress in Materials Science.

[11]  L. Chai,et al.  Microstructural characteristics and hardness of CoNiTi medium-entropy alloy coating on pure Ti substrate prepared by pulsed laser cladding , 2020 .

[12]  E. Han,et al.  Effect of Cr content on microstructure and properties of Mo0.5VNbTiCrx high-entropy alloys , 2020 .

[13]  A. Clarke,et al.  Solid-solution strengthening in refractory high entropy alloys , 2019, Acta Materialia.

[14]  M. Hernandez-Rodriguez,et al.  Tribological behavior of borided surface on CoCrMo cast alloy , 2019, Wear.

[15]  Z. Lu,et al.  Evolution in microstructure and corrosion behavior of AlCoCrxFeNi high-entropy alloy coatings fabricated by laser cladding , 2019, Journal of Alloys and Compounds.

[16]  Lei Zhang,et al.  Combined effect of pH and H2S on the structure of passive film formed on type 316L stainless steel , 2018, Applied Surface Science.

[17]  E. Lavernia,et al.  A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength , 2018, Science Advances.

[18]  K. Kanlayasiri,et al.  Effect of Si on Microstructure and Corrosion Behavior of CoCrMo Alloys , 2018 .

[19]  Xuefei Zhang,et al.  Effect of molybdenum on phases, microstructure and mechanical properties of Al0.5CoCrFeMoxNi high entropy alloys , 2018 .

[20]  Bin Yang,et al.  Homogenization of AlxCoCrFeNi high-entropy alloys with improved corrosion resistance , 2018 .

[21]  Zhifeng Zhou,et al.  Surface gradient CoCrMo alloy generated by carbon ion implantation with enhanced tribocorrosion resistance , 2017 .

[22]  Karin A. Dahmen,et al.  Corrosion of Al xCoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior , 2017 .

[23]  C. Dong,et al.  Influence of pH on the passivation behaviour of 904L stainless steel bipolar plates for proton exchange membrane fuel cells , 2016 .

[24]  Bin Liu,et al.  Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases , 2016 .

[25]  Tongmin Wang,et al.  Effect of vanadium addition on the microstructure and properties of AlCoCrFeNi high entropy alloy , 2014 .

[26]  A. Torrance,et al.  Wear mechanisms and scale effects in two-body abrasion , 2009 .

[27]  T. Shun,et al.  Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes , 2004 .