Impact-Induced Damage of Laminated Graphite/Epoxy Composites Monitored Using Embedded In-Line Fiber Etalon Optic Sensors

This paper describes the use of fiber optic sensors embedded into laminated graphite/epoxy composites for low velocity impact-induced damage assessment. The sensor system uses in-line fiber etalon (ILFE) sensors interrogated with path-matched differential interferometry (PMDI) and demodulated with a "single channel phase tracker." Uncoated and coated copper ILFE sensors were embedded at the mid-plane of [902/04/OF(O)/04/902] composite plates subjected to transverse impact (The OF(0) denotes an optical fiber orientation of zero degree). The ILFE sensor response was compared to a resistance strain gage bonded to the back side of the specimen and to the load cell mounted on the impactor. The strain measured with the metal coated ILFE sensor and the load cell response were used to plot a hysteresis strain-load curve to assess the impact-induced damage. The result shows that the-1 J impact energy starts to initiate the composite damage, and that the area contained within the hysteresis loop area is approximately proportional to the delamination area evaluated by X-ray radiographs. X-ray NDE indicates that the embedded ILFE sensor does not alter the structural integrity based on the macro-scale observations. In addition, the impact test showed that the sensor embedded in the middle layer had higher survivability than the resistance strain gage bonded to the rear surface of the plate.

[1]  Terrence J. Sejnowski,et al.  Analysis of hidden units in a layered network trained to classify sonar targets , 1988, Neural Networks.

[2]  Chia-Chen Chang,et al.  Metal-coated optical fiber damage sensors , 1993, Smart Structures.

[3]  S. Timoshenko,et al.  THEORY OF PLATES AND SHELLS , 1959 .

[4]  Alan D. Kersey,et al.  Single-channel phase-tracker for the open-loop fiber optic gyroscope , 1992, Other Conferences.

[5]  Kent A. Murphy,et al.  Optical fiber sensing technique for impact detection and location in composites and metal specimens , 1995 .

[6]  Chia-Chen Chang,et al.  Optical fiber sensors embedded in composite panels for impact detection , 1995, Smart Structures.

[7]  E. Udd.  Fiber Optic Smart Structures and Skins III , 1990 .

[8]  James S. Sirkis,et al.  Evaluation of integrated optic modulator-based detection schemes for in-line fiber etalon sensors , 1995 .

[9]  Raymond M. Measures,et al.  Structurally Integrated Fiber Optic Damage Assessment System For Composite Materials , 1989, Other Conferences.

[10]  Kim D. Bennett,et al.  Fiber optic modal domain sensors for monitoring impact-related acoustic shock waves , 1994, Optics & Photonics.

[11]  Peter L. Fuhr,et al.  Impact detection and location system for smart skins applications , 1990, Other Conferences.

[12]  L. Malvern,et al.  Transverse cracks in glass/epoxy cross-ply laminates impacted by projectiles , 1981 .

[13]  James S. Sirkis,et al.  Thermal plastic metal coatings on optical fiber sensors , 1991, Other Conferences.

[14]  B. T. Smith,et al.  Low Velocity Impact of Optical Fiber Embedded Laminated Graphite/Epoxy Panels. Part I: Macro-Scale , 1994 .

[15]  K. Chandrashekhara,et al.  Hybrid sensors for impact-induced strain in smart composite plates , 1995, Smart Structures.

[16]  Tobey M. Cordell,et al.  On Low-Velocity Impact Testing of Composite Materials , 1988 .

[17]  Franz A. Blaha,et al.  A Fiber Optic Strain And Impact Sensor System For Composite Materials , 1990, Other Conferences.

[18]  L. Michel,et al.  Impact and vibration detection in composite materials by using intermodal interference in multimode optical fibers. , 1996, Applied optics.

[19]  J. S. Sirkis,et al.  Multiplexed optical fiber sensors for air frame repair patch monitoring , 1996 .

[20]  A. Mendelson.  Plasticity: Theory and Application , 1968 .

[21]  J S Sirkis,et al.  In-line fiber étalon for strain measurement. , 1993, Optics letters.

[22]  Dahsin Liu,et al.  Impact-Induced Delamination—A View of Bending Stiffness Mismatching , 1988 .