Mode instability dynamics in high-power low-numerical-aperture step-index fiber amplifier.

The study on mode instability (MI) in the large-mode-area fiber is generating great interest regarding the high-power applications of fiber lasers. To the best of our knowledge, we have investigated for the first time the dynamics of the output beam from a kilowatt-level all-fiber amplifier based on the low-numerical-aperture (<0.04) step-index (SI) fiber before and after the onset of the MI, including the temporal dynamics and mode evolution. The temporal power fluctuations indicate three evolution stages apart from the onset threshold of the MI, defined as stable, transition, and chaotic regions. In addition, the mode decomposition technique is utilized to accurately observe and investigate the mode evolution and relevant modal content corresponding to the transition and chaotic regions in the SI fiber laser for the first time. According to the mode decomposition results, the reduction of the extracted power can be explained by the high bending loss of the high-order mode excited in the MI process. Finally, the difference of MI dynamics between the fiber lasers based on the SI fiber and rod-type photonic crystal fiber is discussed.

[1]  J. Limpert,et al.  Impact of photodarkening on the mode instability threshold. , 2015, Optics express.

[2]  Pu Zhou,et al.  Fast and accurate modal decomposition of multimode fiber based on stochastic parallel gradient descent algorithm. , 2013, Applied optics.

[3]  Liangjin Huang,et al.  Modal Analysis of Fiber Laser Beam by Using Stochastic Parallel Gradient Descent Algorithm , 2015, IEEE Photonics Technology Letters.

[4]  Cesar Jauregui,et al.  2 kW average power from a pulsed Yb-doped rod-type fiber amplifier. , 2014, Optics letters.

[5]  Benjamin Ward,et al.  Theory and modeling of photodarkening-induced quasi static degradation in fiber amplifiers. , 2016, Optics express.

[6]  Cesar Jauregui,et al.  High-speed modal decomposition of mode instabilities in high-power fiber lasers. , 2011, Optics letters.

[7]  Kristian Rymann Hansen,et al.  Theoretical analysis of mode instability in high-power fiber amplifiers. , 2013, Optics express.

[8]  Cesar Jauregui,et al.  Thermally induced waveguide changes in active fibers. , 2012, Optics express.

[9]  Jens Limpert,et al.  The future is fibre accelerators , 2013, Nature Photonics.

[10]  L. Petit,et al.  Short-Term and Long-Term Stability in Ytterbium-Doped High-Power Fiber Lasers and Amplifiers , 2014, IEEE Journal of Selected Topics in Quantum Electronics.

[11]  Cesar Jauregui,et al.  High-power fibre lasers , 2013 .

[12]  Arlee V Smith,et al.  Steady-periodic method for modeling mode instability in fiber amplifiers. , 2013, Optics express.

[13]  W. Shi,et al.  Fiber lasers and their applications [Invited]. , 2014, Applied optics.

[14]  Y. Jeong,et al.  Ytterbium-doped large-core fiber laser with 1.36 kW continuous-wave output power. , 2004, Optics express.

[15]  Cesar Jauregui,et al.  Physical origin of mode instabilities in high-power fiber laser systems. , 2012, Optics express.

[16]  Cesar Jauregui,et al.  Temporal dynamics of mode instabilities in high-power fiber lasers and amplifiers. , 2012, Optics express.

[17]  Frank W. Wise,et al.  Recent advances in fibre lasers for nonlinear microscopy , 2013, Nature Photonics.

[18]  David N. Payne,et al.  High-Power Fiber Lasers , 2011, Science.

[19]  M. Zervas,et al.  High Power Fiber Lasers: A Review , 2014, IEEE Journal of Selected Topics in Quantum Electronics.

[20]  Cesar Jauregui,et al.  Designing advanced very-large-mode-area fibers for power scaling of fiber-laser systems , 2014 .

[21]  Iyad Dajani,et al.  Investigations of modal instabilities in fiber amplifiers through detailed numerical simulations. , 2013, Optics express.

[22]  P. Sprangle,et al.  High-power lasers for directed-energy applications. , 2015, Applied optics.

[23]  Yan Feng,et al.  589 nm laser generation by frequency doubling of a single-frequency Raman fiber amplifier in PPSLT. , 2013, Applied optics.

[25]  Xiangjie Meng,et al.  2.5 kW monolithic continuous wave (CW) near diffraction-limited fiber laser at 1080 nm , 2014 .

[26]  A. Smith,et al.  Spontaneous Rayleigh Seed for Stimulated Rayleigh Scattering in High Power Fiber Amplifiers , 2013, IEEE Photonics Journal.

[27]  Zejin Liu,et al.  Study of Wavelength Dependence of Mode Instability Based on a Semi-Analytical Model , 2015, IEEE Journal of Quantum Electronics.

[28]  Joel Ramjist,et al.  Pulsed and CW adjustable 1942 nm single-mode all-fiber Tm-doped fiber laser system for surgical laser soft tissue ablation applications. , 2016, Optics express.

[29]  Pengfei Ma,et al.  1.3 kW monolithic linearly polarized single-mode master oscillator power amplifier and strategies for mitigating mode instabilities , 2015 .

[30]  Daniel Flamm,et al.  Comparative analysis of numerical methods for the mode analysis of laser beams. , 2013, Applied optics.

[31]  Marko Laurila,et al.  Frequency resolved transverse mode instability in rod fiber amplifiers. , 2013, Optics express.

[32]  Rongtao Su,et al.  All-fiber-integrated linearly polarized fiber laser delivering 476  μJ, 50  kHz, nanosecond pulses for ultrasonic generation. , 2016, Applied optics.

[33]  Yongmin Jung,et al.  Demonstration of ultra-low NA rare-earth doped step index fiber for applications in high power fiber lasers. , 2015, Optics express.

[34]  Liang Dong,et al.  Stimulated thermal Rayleigh scattering in optical fibers. , 2013, Optics express.

[35]  Eric Honea,et al.  Threshold power and fiber degradation induced modal instabilities in high-power fiber amplifiers based on large mode area fibers , 2014, Photonics West - Lasers and Applications in Science and Engineering.

[36]  Arlee V. Smith,et al.  Overview of a Steady-Periodic Model of Modal Instability in Fiber Amplifiers , 2014, IEEE Journal of Selected Topics in Quantum Electronics.