Development of carbon nanotube-based gas sensors for NOx gas detection working at low temperature

Carbon nanotube (CNT)-based NOx gas sensors which can operate at room temperature were prepared on Al2O3 substrates with interdigitated Pt-electrodes using both dc sputtering method and chemical vapor deposition (CVD) method. In this method, Al buffer layer and Fe catalytic thin film were prepared on the substrate by dc sputtering method and then CNTs were grown by thermal CVD method using ethylene gas. The scanning electron microscope (SEM) images of the CNTs on the substrates indicated that the vertically aligned multi-walled CNT (MWCNT) and the randomly oriented MWCNT were grown selectively by insertion of Al buffer layer. Gas sensing property to NO and NO2 gases were measured. Resistance of the prepared CNT-based gas sensor decreased with increase of NO and NO2 gas concentration. UV light irradiation was examined to detach the adsorbed gas molecule at room temperature. In this paper, it is suggested that CNT-based gas sensors have a great possibility to apply innovative NOx gas sensor from the experimental result.

[1]  Kong,et al.  Nanotube molecular wires as chemical sensors , 2000, Science.

[2]  Kenji Ebihara,et al.  NO Sensing Property of Carbon Nanotube Based Thin Film Gas Sensors Prepared by Chemical Vapor Deposition Techniques , 2006 .

[3]  Christophe Ramseyer,et al.  Direct growth of the multi-walled carbon nanotubes as a tool to detect ammonia at room temperature , 2006 .

[4]  Hendrik Ulbricht,et al.  Thermal desorption of gases and solvents from graphite and carbon nanotube surfaces , 2006 .

[5]  Jung ho Park,et al.  Patterned multiwall carbon nanotube films as materials of NO2 gas sensors , 2006 .

[6]  Bingqing Wei,et al.  Miniaturized gas ionization sensors using carbon nanotubes , 2003, Nature.

[7]  Chong-Yun Park,et al.  Influence of morphology of catalyst thin film on vertically aligned carbon nanotube growth , 2004 .

[8]  T. Ichihashi,et al.  Support materials based on converted aluminum films for chemical vapor deposition growth of single-wall carbon nanotubes , 2003 .

[9]  Michele Penza,et al.  Effect of growth catalysts on gas sensitivity in carbon nanotube film based chemiresistive sensors , 2007 .

[10]  Jijun Zhao,et al.  Gas molecule adsorption in carbon nanotubes and nanotube bundles , 2002 .

[11]  Marek Trojanowicz,et al.  Analytical applications of carbon nanotubes : a review , 2006 .

[12]  Jose Maria Kenny,et al.  Carbon nanotubes as new materials for gas sensing applications , 2004 .

[13]  Vertically aligned carbon nanotube growth by pulsed laser deposition and thermal chemical vapor deposition methods , 2002 .

[14]  H. Harima,et al.  Growth of Single-Walled Carbon Nanotubes Rooted from Fe/Al Nanoparticle Array , 2005 .

[15]  C. Bauschlicher,et al.  The adsorption of NO2 on (9,0) and (10,0) carbon nanotubes , 2006 .

[16]  Hongjie Dai,et al.  Ab initio study of CNT NO2 gas sensor , 2004 .

[17]  Eduard Llobet,et al.  Metal-decorated multi-wall carbon nanotubes for low temperature gas sensing , 2007 .

[18]  Noriaki Sano,et al.  Application of dielectrophoresis to fabrication of carbon nanohorn gas sensor , 2006 .

[19]  Byeong Kwon Ju,et al.  Gas sensing properties of printed multiwalled carbon nanotubes using the field emission effect , 2006 .

[20]  Konstantin M. Neyman,et al.  Adsorption and oxidation of NO on Au(111) surface: Density functional studies , 2006 .

[21]  Jesús Lozano,et al.  Novel selective sensors based on carbon nanotube films for hydrogen detection , 2007 .