Facile dynamic current deposition of high tensile gradient Cu foil with (110) preferred orientation

[1]  Xiqian Yu,et al.  Controlling the Li deposition below the interface , 2022, eScience.

[2]  Y. Miao,et al.  Electroactive polymeric nanofibrous composite to drive in situ construction of lithiophilic SEI for stable lithium metal anodes , 2022, eScience.

[3]  H. Jeong,et al.  Flat-surface-assisted and self-regulated oxidation resistance of Cu(111) , 2021, Nature.

[4]  Jingli Luo,et al.  Copper-cobalt-nickel oxide nanowire arrays on copper foams as self-standing anode materials for lithium ion batteries , 2021 .

[5]  F. Cheng,et al.  Growing Nanostructured CuO on Copper Foil via Chemical Etching to Upgrade Metallic Lithium Anode. , 2021, ACS applied materials & interfaces.

[6]  Qinghua Zhang,et al.  Surface coordination layer passivates oxidation of copper , 2020, Nature.

[7]  X. Mei,et al.  Processing of a Large‐Scale Microporous Group on Copper Foil Current Collectors for Lithium Batteries Using Femtosecond Laser , 2020, Advanced Engineering Materials.

[8]  Robin H. A. Ras,et al.  Design of robust superhydrophobic surfaces , 2020, Nature.

[9]  M. Winter,et al.  Lithium Metal Batteries: Galvanic Corrosion of Lithium‐Powder‐Based Electrodes (Adv. Energy Mater. 15/2020) , 2020 .

[10]  Jiang Li,et al.  Microstructure evolution and properties of a quaternary Cu–Ni–Co–Si alloy with high strength and conductivity , 2019, Materials Science and Engineering: A.

[11]  Jiayan Luo,et al.  A corrosion-resistant current collector for lithium metal anodes , 2019, Energy Storage Materials.

[12]  W. Kern,et al.  Copper/Epoxy Joints in Printed Circuit Boards: Manufacturing and Interfacial Failure Mechanisms , 2019, Materials.

[13]  Yan Wang,et al.  Lithiation-induced interfacial failure of electrode-collector: A first-principles study , 2019, Materials Chemistry and Physics.

[14]  Daniel J. Noelle,et al.  Improved safety and mechanical characterizations of thick lithium-ion battery electrodes structured with porous metal current collectors , 2018, Journal of Power Sources.

[15]  Wenbo Chen,et al.  Influence of Low Oxygen Content on the Recrystallization Behavior of Rolled Copper Foil , 2018, Oxidation of Metals.

[16]  Yonggang Yao,et al.  Ultrafine Silver Nanoparticles for Seeded Lithium Deposition toward Stable Lithium Metal Anode , 2017, Advanced materials.

[17]  Zhou Li,et al.  Microstructure evolution and properties of Cu-Cr alloy during continuous extrusion process , 2017 .

[18]  Ligen Wang,et al.  Mechanical properties and microstructure of rolled and electrodeposited thin copper foil , 2016, Rare Metals.

[19]  C. Fennie,et al.  Polar metals by geometric design , 2016, Nature.

[20]  M. Shui,et al.  Comparative study on surface behaviors of copper current collector in electrolyte for lithium-ion batteries , 2011 .

[21]  Ke Lu,et al.  Surface Nanocrystallization (SNC) of Metallic Materials-Presentation of the Concept behind a New Approach , 2009 .

[22]  C. H. Lee,et al.  Bottom-up filling in Cu electroless deposition using bis-(3-sulfopropyl)-disulfide (SPS) , 2005 .

[23]  Haruo Murakami,et al.  Crystal Growth of Electrolytic Cu Foil , 2004 .

[24]  T. Moffat,et al.  Electrodeposition of Copper in the SPS-PEG-Cl Additive System I. Kinetic Measurements: Influence of SPS , 2004 .

[25]  Keith C. C. Chan,et al.  Pulse electrodeposition of nanocrystalline nickel using ultra narrow pulse width and high peak current density , 2003 .

[26]  N. Spyrellis,et al.  Textural modifications in nickel electrodeposition under pulse reserved current , 1993 .

[27]  Ryuzo Watanabe,et al.  Functionally gradient materials. In pursuit of super heat resisting materials for spacecraft. , 1987 .