Preparation of indium tin oxide thin films without external heating for application in solar cells

[1]  Sumei Huang,et al.  Enhancement of the light output of GaN-based light-emitting diodes using surface-textured indium-tin-oxide transparent ohmic contacts , 2008, Displays.

[2]  S. M. Huang,et al.  Improvement in performance of GaN-based light-emitting diodes with indium tin oxide based transparent ohmic contacts , 2007, Displays.

[3]  Y. W. Chen,et al.  PREPARATION OF INDIUM TIN OXIDE FILMS BY RADIO FREQUENCY MAGNETRON SPUTTERING UNDER LOW VACUUM LEVEL , 2006 .

[4]  C. Guillén,et al.  Comparison study of ITO thin films deposited by sputtering at room temperature onto polymer and glass substrates , 2005 .

[5]  Young-Ki Cho,et al.  Crystallization of indium tin oxide thin films prepared by RF-magnetron sputtering without external heating , 2005 .

[6]  Hyun-Sik Kim,et al.  Low-resistivity and transparent indium-oxide-doped ZnO ohmic contact to p-type GaN , 2004 .

[7]  T. Nakada,et al.  Novel device structure for Cu(In,Ga)Se2 thin film solar cells using transparent conducting oxide back and front contacts , 2004 .

[8]  Yves Leterrier,et al.  Mechanical integrity of transparent conductive oxide films for flexible polymer-based displays , 2004 .

[9]  H. Zogg,et al.  CdTe solar cell in a novel configuration , 2004 .

[10]  R. Hippler,et al.  Investigation of diffusion and crystallization processes in thin ITO films by temperature and time resolved grazing incidence X-ray diffractometry , 2003 .

[11]  Eiji Kusano,et al.  Electrical and mechanical properties of SnO2:Nb films for touch screens , 2002 .

[12]  Akio Suzuki,et al.  Highly conducting transparent indium tin oxide films prepared by pulsed laser deposition , 2002 .

[13]  Y. Sawada,et al.  Indium–tin-oxide thin films prepared by dip-coating of indium diacetate monohydroxide and tin dichloride , 2001 .

[14]  S. Koh,et al.  Low temperature deposition of ITO thin films by ion beam sputtering , 2000 .

[15]  Carla Minarini,et al.  Properties of ITO thin films deposited by RF magnetron sputtering at elevated substrate temperature , 2000 .

[16]  I. Sokólska.  Spectroscopic characterisation of LaGaO3:Er3+ crystals , 2000 .

[17]  A. Punnoose,et al.  Properties of ITO films prepared by rf magnetron sputtering , 2000 .

[18]  I. Eisgruber,et al.  Intelligent process control of indium tin oxide sputter deposition using optical emission spectroscopy , 1999 .

[19]  R. B. Tahar,et al.  Tin doped indium oxide thin films: Electrical properties , 1998 .

[20]  K. Carl,et al.  Optimization of sputtered ITO films with respect to the oxygen partial pressure and substrate temperature , 1997 .

[21]  H. Cui,et al.  The fabrication of dipped CdS and sputtered ITO thin films for photovoltaic solar cells , 1996 .

[22]  J. Sites,et al.  Annealing effects on individual loss mechanisms in CuInSe2 solar cells , 1991 .

[23]  A. Mansingh,et al.  Effect of target‐substrate distance on the growth and properties of rf‐sputtered indium tin oxide films , 1989 .

[24]  I. Hamberg,et al.  Evaporated Sn‐doped In2O3 films: Basic optical properties and applications to energy‐efficient windows , 1986 .

[25]  G. Lavareda,et al.  ITO coated flexible transparent substrates for liquid crystal based devices , 2002 .