Strain-rate dependency of the dynamic tensile strength of rock

Abstract Dynamic tension tests based on Hopkinson’s effect combined with the spalling phenomena were performed on Inada granite and Tage tuff to investigate the strain-rate dependency of the dynamic tensile strength of rock. The static tensile strengths were determined and compared with the dynamic tensile strengths. The fracture processes under various loading conditions were analyzed using a proposed finite element method to verify the differences between the dynamic and static tensile strengths and the strain-rate dependency. These analyses revealed that the differences were due to the stress concentrations and redistribution mechanisms in the rock. The rock inhomogeneity also contributed to the difference between the dynamic and static tensile strengths. An increase in the uniformity coefficient stimulated a reduction in the strain-rate dependency; i.e., the strain-rate dependency of the dynamic tensile strength was caused by the inhomogeneity of the rock. The fracture processes and principal stress fields in the specimens at high and low strain rates were analyzed to investigate fracture formations at various strain rates. Higher strain rates generated a large number of microcracks; the interaction of the microcracks interfered with the formation of the fracture plane. The observed dynamic tensile strength increase at a high strain rate was caused by crack arrests due to the generation of a large number of microcracks.

[1]  R. E. Hollenbach,et al.  Dynamic fracture strength of rock , 1979 .

[2]  J. Lankford.  TECHNICAL NOTE. THE ROLE OF TENSILE MICROFRACTURE IN THE STRAIN RATE DEPENDENCE OF COMPRESSIVE STRENGTH OF FINE-GRAINED LIMESTONE - ANALOGY WITH STRONG CERAMICS , 1981 .

[3]  P. C. Grew,et al.  Stress corrosion theory of crack propagation with applications to geophysics , 1977 .

[4]  Joseph W. Tedesco,et al.  Experimental and Numerical Analysis of High Strain Rate Splitting-Tensile Tests , 1993 .

[5]  J. Lankford.  The role of tensile microfracture in the strain rate dependence of compressive strenght of fine-grained limestone—analogy with strong ceramics , 1981 .

[6]  Arne Hillerborg,et al.  Application of the fictitious crack model to different types of materials , 1991, International Journal of Fracture.

[7]  W. Weibull.  A Statistical Distribution Function of Wide Applicability , 1951 .

[8]  H. Reinhardt,et al.  The split Hopkinson bar, a versatile tool for the impact testing of concrete , 1986 .

[9]  Takashi Nishiyama,et al.  Identification of pore spaces and microcracks using fluorescent resins , 1994 .

[10]  C. Mariotti,et al.  Experimental and numerical study of concrete at high strain rates in tension , 2001 .

[11]  D. L. Birkimer,et al.  Possible fracture criterion for the dynamic tensile strength of rock , 1970 .

[12]  Woo-Jin Jung,et al.  EFFECTS OF WATER SATURATION AND STRAIN RATE ON THE TENSILE STRENGTH OF ROCKS UNDER DYNAMIC LOAD , 2001 .

[13]  Kunihisa Katsuyama,et al.  Study on the tensile strength of brittle materials under high stress rate using the technique based on Hopkinson's effect , 1998 .

[14]  Hans W. Reinhardt,et al.  Tensile fracture of concrete at high loading rates taking account of inertia and crack velocity effects , 1991 .

[15]  B. N. Whittaker,et al.  Rock Fracture Mechanics: Principles, Design and Applications , 1992 .

[16]  F. S. Lamb,et al.  On the Propagation of Tremors over the Surface of an Elastic Solid , 1904 .

[17]  O. Sano.  Experimental study of anisotropy of stress corrosion cracking in rocks by double-torsion method. , 1988 .