Investigation of the Mechanical Properties of Parts Fabricated with Ultrasonic Micro Injection Molding Process Using Polypropylene Recycled Material

This research focuses on investigating how physical and mechanical properties of polypropylene (PP) recycled material are modified when ultrasonic micro injection molding (UMIM) technology is used to produce material specimens. Experimental characterization by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectra, and rheology tests show that the fabricated PP samples were able to withstand up to five times recycled processing before some signs of mechanical and physical properties degradation are observed. Surprisingly, uniaxial extension tests show an increase of 3.07%, 10.97% and 27.33% for Young’s modulus, yield stress and ultimate stress values, respectively, and a slight reduction of 1.29% for the samples elongation at break when compared to the experimental data collected from virgin material samples. The improvement of these mechanical properties in the recycled samples suggests that ultrasonic microinjection produces a mechano-chemical material change.

[1]  X. Plantá,et al.  Ultrasonic moulding: Current state of the technology. , 2020, Ultrasonics.

[2]  Dagmar R. D’hooge,et al.  Influence of Different Stabilization Systems and Multiple Ultraviolet A (UVA) Aging/Recycling Steps on Physicochemical, Mechanical, Colorimetric, and Thermal-Oxidative Properties of ABS , 2020, Materials.

[3]  L. Costiuc,et al.  Differential scanning calorimetry—a powerful tool for the determination of morphological features of the recycled polypropylene , 2019, Journal of Thermal Analysis and Calorimetry.

[4]  C. Spicker,et al.  The use of rheological behavior to monitor the processing and service life properties of recycled polypropylene , 2019, Food Packaging and Shelf Life.

[5]  Dagmar R. D’hooge,et al.  A Statistical Analysis on the Effect of Antioxidants on the Thermal-Oxidative Stability of Commercial Mass- and Emulsion-Polymerized ABS , 2018, Polymers.

[6]  A. Galeski,et al.  Cavitation phenomenon and mechanical properties of partially disentangled polypropylene , 2018, Polymer.

[7]  A. Elías-Zúñiga,et al.  Processing of ultra-high molecular weight polyethylene/graphite composites by ultrasonic injection moulding: Taguchi optimization. , 2018, Ultrasonics sonochemistry.

[8]  J. Duflou,et al.  Evaluation of the quality of postconsumer plastics obtained from disassembly‐based recycling strategies , 2018 .

[9]  Alex Elías-Zúñiga,et al.  Micro injection molding processing of UHMWPE using ultrasonic vibration energy , 2017 .

[10]  R. Geyer,et al.  Production, use, and fate of all plastics ever made , 2017, Science Advances.

[11]  Xiaoyan Liu,et al.  Determination of plateau moduli and entanglement molecular weights of ultra-high molecular weight isotactic polypropylene synthesized by Ziegler-Natta catalyst , 2017 .

[12]  Xiaoping Zhang,et al.  Ultrasonic twin screw compounding of polypropylene with carbon nanotubes, graphene nanoplates and carbon black , 2016 .

[13]  Joaquim Ciurana,et al.  Influence of processing conditions on manufacturing polyamide parts by ultrasonic molding , 2016 .

[14]  Alex Elías-Zúñiga,et al.  Assessing a stepped sonotrode in ultrasonic molding technology , 2016 .

[15]  Jordi Puiggalí,et al.  Micro-molding with ultrasonic vibration energy: new method to disperse nanoclays in polymer matrices. , 2014, Ultrasonics sonochemistry.

[16]  M. Badida,et al.  The Experimental Verification of the Impact of Regrind on Mechanical Properties of Thermoplastics , 2013 .

[17]  I. Ward,et al.  Failure mechanisms in polyolefines: The role of crazing, shear yielding and the entanglement network , 2011 .

[18]  M. Tiryakioğlu,et al.  Relationship between Fracture Toughness and Tensile Properties of A357 Cast Aluminum Alloy , 2009 .

[19]  David J. Lohse,et al.  Chain dimensions and entanglement spacings in dense macromolecular systems , 1999 .

[20]  R. Mülhaupt,et al.  Determination of Plateau Moduli and Entanglement Molecular Weights of Isotactic, Syndiotactic, and Atactic Polypropylenes Synthesized with Metallocene Catalysts , 1998 .

[21]  S. Shang.  The precise determination of polydispersity index (PI) in rheological testing of polypropylene , 1993 .

[22]  Joaquim Ciurana,et al.  Study of the Ultrasonic Molding Process Parameters for Manufacturing Polypropylene Parts , 2015 .

[23]  Rong Cheng,et al.  Process and properties of micro-ultrasonic powder molding with polypropylene , 2014 .

[24]  Oana Ghita,et al.  Studies on the reprocessability of poly(ether ether ketone) (PEEK) , 2014 .