Study on the performance of distributed energy systems based on historical loads considering parameter uncertainties for decision making

Distributed energy systems (DESs) are becoming increasingly popular because of their high-energy efficiency and low pollution emissions. Accurate performance evaluation of such systems is critical for processes at the early design stages. However, there are considerable uncertainties in terms of the parameters used for performance evaluation and design optimization, including component efficiencies, customer demands, and energy markets. These uncertainties can significantly influence the performance of DESs. Without consideration of these uncertainties, the performance of DESs can be overestimated or underestimated, which leads to inaccurate decision-making. Therefore, this paper presents a comprehensive evaluation of the performance of DESs by considering uncertainties in 12 parameters that relate to the electrical and thermal efficiencies of generators, efficiency of chillers and pumps, load density, energy markets, and so on. The energy and economic performance of DESs under each uncertainty are analyzed and compared with that of conventional energy systems. The suitable conditions for using DESs and other factors that can influence their performance are determined. The results of this study can serve as a guide for design optimization and policy development to promote the use of DESs in China.

[1]  Lang Wang,et al.  Energy, environmental and economic evaluation of the CCHP systems for a remote island in south of China , 2016 .

[2]  Guangyin Xu,et al.  Distributed energy system for sustainability transition: A comprehensive assessment under uncertainties based on interval multi-criteria decision making method by coupling interval DEMATEL and interval VIKOR , 2019, Energy.

[3]  Sami Kara,et al.  The optimal selection of on-site CHP systems through integrated sizing and operational strategy , 2014 .

[4]  Changwen Zheng,et al.  A novel thermal storage strategy for CCHP system based on energy demands and state of storage tank , 2017 .

[5]  Hongbo Ren,et al.  A MILP model for integrated plan and evaluation of distributed energy systems , 2010 .

[6]  Hongxing Yang,et al.  An optimization method for design and operation of combined cooling, heating, and power systems toward a smart grid , 2016 .

[7]  Jan Carmeliet,et al.  A review of uncertainty characterisation approaches for the optimal design of distributed energy systems , 2018 .

[8]  Wang Hui,et al.  Effects of load following operational strategy on CCHP system with an auxiliary ground source heat pump considering carbon tax and electricity feed in tariff , 2017 .

[9]  C. Y. Zheng,et al.  Impacts of feed-in tariff policies on design and performance of CCHP system in different climate zones , 2016 .

[10]  Hongbo Ren,et al.  Optimal option of distributed energy systems for building complexes in different climate zones in China , 2012 .

[11]  Shengwei Wang,et al.  A new distributed energy system configuration for cooling dominated districts and the performance assessment based on real site measurements , 2019, Renewable Energy.

[12]  Liuchen Liu,et al.  Multiple energy complementation based on distributed energy systems – Case study of Chongming county, China , 2017 .

[13]  Ming Zeng,et al.  Gas-fired combined cooling, heating and power (CCHP) in Beijing: A techno-economic analysis , 2016 .

[14]  Xi Zhuo Jiang,et al.  Thermodynamic boundaries of energy saving in conventional CCHP (Combined Cooling, Heating and Power) systems , 2016 .

[15]  Hongbo Ren,et al.  Multi-criteria assessment of combined cooling, heating and power systems located in different regions in Japan , 2014 .

[16]  Pedro J. Mago,et al.  Analysis and optimization of CCHP systems based on energy, economical, and environmental considerations , 2009 .

[17]  Tong Zhu,et al.  Feasibility analysis on distributed energy system of Chongming County based on RETScreen software , 2017 .

[18]  Jilai Yu,et al.  Optimal Operation of Network-Connected Combined Heat and Powers for Customer Profit Maximization , 2016 .

[19]  Jiangjiang Wang,et al.  Influence analysis of building types and climate zones on energetic, economic and environmental performances of BCHP systems , 2011 .

[20]  Jan Carmeliet,et al.  Uncertainty and global sensitivity analysis for the optimal design of distributed energy systems , 2018 .

[21]  Pedro J. Mago,et al.  Evaluation of CCHP systems performance based on operational cost, primary energy consumption, and carbon dioxide emission by utilizing an optimal operation scheme , 2009 .

[22]  Ouyang Shaojie,et al.  Overall review of distributed energy development in China: Status quo, barriers and solutions , 2015 .

[23]  Tao Zhang,et al.  Comparative analysis on operation strategies of CCHP system with cool thermal storage for a data center , 2016 .

[24]  Fu Xiao,et al.  Performance assessment of district cooling systems for a new development district at planning stage , 2015 .

[25]  Alfredo Gimelli,et al.  Optimal design of modular cogeneration plants for hospital facilities and robustness evaluation of the results , 2017 .

[26]  Kang Shushuo,et al.  Current status of distributed energy system in China , 2016 .

[27]  Jan Carmeliet,et al.  Design of distributed energy systems under uncertainty: A two-stage stochastic programming approach , 2018, Applied Energy.

[28]  Qian Ai,et al.  Optimal Operation of Combined Heat and Power System Based on Forecasted Energy Prices in Real-Time Markets , 2015 .

[29]  Pierluigi Siano,et al.  Stochastic optimal scheduling of distributed energy resources with renewables considering economic and environmental aspects , 2018 .

[30]  Pedro J. Mago,et al.  Evaluation of a turbine driven CCHP system for large office buildings under different operating strategies , 2010 .

[31]  Lifang Liu,et al.  Analysis of a feasible trigeneration system taking solar energy and biomass as co-feeds , 2016 .

[32]  Yaobin Liu,et al.  Exploring the relationship between urbanization and energy consumption in China using ARDL (autoregressive distributed lag) and FDM (factor decomposition model) , 2009 .

[33]  Nelson Fumo,et al.  Performance analysis of CCHP and CHP systems operating following the thermal and electric load , 2009 .

[34]  Huang Xing-hua,et al.  Influence of energy demands ratio on the optimal facility scheme and feasibility of BCHP system , 2008 .

[35]  Nan Li,et al.  Optimal design and operation strategy for integrated evaluation of CCHP (combined cooling heating and power) system , 2016 .

[36]  Christos N. Markides,et al.  A Technology Selection and Operation (TSO) optimisation model for distributed energy systems: Mathematical formulation and case study , 2016 .

[37]  M. M. Ardehali,et al.  Examination of energy price policies in Iran for optimal configuration of CHP and CCHP systems based on particle swarm optimization algorithm , 2010 .

[38]  Wenjie Gang,et al.  Energy performance and operation characteristics of distributed energy systems with district cooling systems in subtropical areas under different control strategies , 2018, Energy.

[39]  Hongbo Ren,et al.  Coupling optimization of urban spatial structure and neighborhood-scale distributed energy systems , 2018 .

[40]  Shengwei Wang,et al.  Application of Distributed Energy Systems in Subtropical and High Density Urban Areas , 2017 .

[41]  Kari Alanne,et al.  Distributed energy generation and sustainable development , 2006 .

[42]  Alfredo Gimelli,et al.  Optimization criteria for cogeneration systems: Multi-objective approach and application in an hospital facility , 2013 .

[43]  Ruzhu Wang,et al.  Evaluation and analysis of novel micro-scale combined cooling, heating and power (MCCHP) system , 2007 .

[44]  You-Yin Jing,et al.  Optimization of capacity and operation for CCHP system by genetic algorithm , 2010 .

[45]  Carmen L. T. Borges,et al.  An overview of reliability models and methods for distribution systems with renewable energy distributed generation , 2012 .

[46]  Edris Pouresmaeil,et al.  Distributed energy resources and benefits to the environment , 2010 .

[47]  Y. M. Shi,et al.  Sensitivity analysis of energy demands on performance of CCHP system , 2008 .

[48]  Peter B. Luh,et al.  Multi-objective design optimization of distributed energy systems through cost and exergy assessments , 2017, Applied Energy.