The Effect of Ladle Treatment on Inclusion Composition in Tool Steel Production

An in‐depth SEM‐investigation of the inclusion composition change in the ladle refining process during tool steel production was done. Plant trials were carried out at Uddeholm Tooling AB in Hagfors, Sweden. A series of samples was taken during ladle refining, from deslagging through vacuum treatment. The goal was evaluating the effects of the top slag and other process parameters on the inclusion composition during ladle refining. The main conclusion was that normal variations in the process have a large influence on inclusion composition. Furthermore, it was concluded that the MgO content in the top slag had a large influence on the inclusion composition throughout the whole ladle refining process. Also, the SiO2 content in the ladle slag originating from the EAF‐slag, had a noticeable effect on the inclusions. The inclusions belonging to the system Al2O3‐CaO‐MgO‐SiO2 showed a continuous composition change throughout the ladle refining process, from high Al2O3, via MgO‐spinel to finally complex types rich in CaO and Al2O3.

[1]  Pär Jönsson,et al.  Effect of Top Slag Composition on Inclusion Characteristics during Vacuum Degassing of Tool Steel , 2007 .

[2]  Pär Jönsson,et al.  Change of Inclusion Characteristics during Vacuum Degassing of Tool Steel , 2006 .

[3]  D. Sichen,et al.  Thermodynamic analysis on the formation and chemical development of non-metallic inclusions in ladle treatment of tool steels , 2006 .

[4]  P. Jönsson,et al.  An Experimental Study of Number Concentration Gradients of Inclusions during Deoxidation using Inductive and Gas Stirring , 2005 .

[5]  로드니 제임스 드라이,et al.  Ironmaking and Steelmaking , 2005 .

[6]  Karin Steneholm.  The effect of ladle vacuum treatment on inclusion characteristics for tool steels , 2005 .

[7]  Du Sichen,et al.  Effect of ladle age on formation of non-metallic inclusions in ladle treatment , 2004 .

[8]  J. Ekengård.  Aspects on Slag/Metal Equilibrium Calculations and Metal Droplet Characteristics in Ladle Slags , 2004 .

[9]  N. Tripathi.  A Study on the Population and Chemical Development of Non-Metallic Inclusions in the Tool-Steel Making Process , 2004 .

[10]  R. Eriksson,et al.  Determination of macroinclusions during clean steel production , 2003 .

[11]  Peter C. Hayes,et al.  Process Principles in Minerals and Materials Production , 2003 .

[12]  K. Beskow.  Formation and Chemical Development of Non-metallic Inclusions in Ladle Treatment of Steel , 2003 .

[13]  C. Lupis,et al.  Chemical characteristics of inclusions formed at various stages during the ladle treatment of steel , 2002 .

[14]  P. Jönsson,et al.  A New Approach to Model Sulphur Refining in a Gas-stirred Ladle -A Coupled CFD and Thermodynamic Model , 1998 .